the sgminer.conf works fine for me.
Topic: [ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster - page 17. (Read 102473 times)
May 23, 2014, 12:49:48 PM
May 23, 2014, 12:43:10 PM
For those gettting low speeds on 79xx or 280/290 cards
my config does on my older 7970 - 2.9 Mh/s
@echo off
color 0E
timeout /t 12
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
export GPU_FORCE_64BIT_PTR=1
export GPU_MAX_HEAP_SIZE=50
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
sgminer.exe -o stratum+tcp://your.pool.here:8382 -u bronan.is.lazy -p NONONO -I 20 -w 128 -g 4 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 --no-submit-stale
my config does on my older 7970 - 2.9 Mh/s
@echo off
color 0E
timeout /t 12
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
export GPU_FORCE_64BIT_PTR=1
export GPU_MAX_HEAP_SIZE=50
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
sgminer.exe -o stratum+tcp://your.pool.here:8382 -u bronan.is.lazy -p NONONO -I 20 -w 128 -g 4 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 --no-submit-stale
May 23, 2014, 12:36:13 PM
Here my first test.
I tried to do it as accurate as i could considering not the shown hashrate but the block solved.
2 rigs with exactly the same config (4x7950)
They were both mining in solo on the same wallet on a low diff coin (one block solved every 2.5 mins approx).
Results after apporx 8 hours of mining:
Rig1 (sph-sgminer)
Blocks solved: 92
Power consumption 450w
Hashrate displayed: 7.2Mh/s
Rig2 (x11-sgminer - donation disabled)
Blocks solved: 103 (+12%)
Power consumption: 480w (+6.7%)
Hashrate displayed: 9.9MH/s (+37.5%)
Going now to do the same test in pool configuration: 2 same rigs, same coin, same pool with prop payout, 2 different accounts to compare earnings.
I'll let you know after approx 8 hours of mining.
thanks quovadizI tried to do it as accurate as i could considering not the shown hashrate but the block solved.
2 rigs with exactly the same config (4x7950)
They were both mining in solo on the same wallet on a low diff coin (one block solved every 2.5 mins approx).
Results after apporx 8 hours of mining:
Rig1 (sph-sgminer)
Blocks solved: 92
Power consumption 450w
Hashrate displayed: 7.2Mh/s
Rig2 (x11-sgminer - donation disabled)
Blocks solved: 103 (+12%)
Power consumption: 480w (+6.7%)
Hashrate displayed: 9.9MH/s (+37.5%)
Going now to do the same test in pool configuration: 2 same rigs, same coin, same pool with prop payout, 2 different accounts to compare earnings.
I'll let you know after approx 8 hours of mining.
good info
looking forward for pool result
May 23, 2014, 12:05:59 PM
What is "p c 0"?
The hotkeys you can press in the open miner window.
P = pool settings
c = change pool management
0 = failover only
I guess this removes the quota that points 2% of your hashrate at the OP's pool?
Not sure if it works yet.
May 23, 2014, 12:04:18 PM
What is "p c 0"?
In the mining display window, press p, then c, then 0. That is to disable the pool 0 by changing to fail-only mode instead of load balance, which is the donation pool.
May 23, 2014, 11:59:34 AM
I want to try this miner, but I have not been able to make in work on my Ubuntu miner.
I thought it was just an executable file to unrar into a folder. No go.
I thought it might require the other sgminer files around it. Also no.
I tried getting various curl libraries and 32 vs 64 bit versions, one GPU at a time, and I'm out of ideas.
This can't be so complicated.
What plan should have worked?
Various errors:
I thought it was just an executable file to unrar into a folder. No go.
I thought it might require the other sgminer files around it. Also no.
I tried getting various curl libraries and 32 vs 64 bit versions, one GPU at a time, and I'm out of ideas.
This can't be so complicated.
What plan should have worked?
Various errors:
- Error -46: Creating Kernel from program. (clCreateKernel)
- my@miner:~/superdarkâ« ./sdminer -c tmb.conf
1 my@miner:~/superdarkâ«
May 23, 2014, 11:06:41 AM
What is "p c 0"?
May 23, 2014, 10:31:27 AM
what does it mean by unauthorized worker?
i had this too, when mining on trademybit, just a reject i presume
May 23, 2014, 10:17:31 AM
yesterday worked fine 3x280x, today if i start sg ati crash “Display driver stopped responding and has recovered”.
bigger 7gpu miner runs couple hours then whole pc freeze, no errors. win8.
normal sgminer 4.1.0 runs ok.
E: updated catalyst driver first pc seems ok now, no crashes.
bigger 7gpu miner runs couple hours then whole pc freeze, no errors. win8.
normal sgminer 4.1.0 runs ok.
E: updated catalyst driver first pc seems ok now, no crashes.
Just reduce the clock speed a little.
May 23, 2014, 09:26:04 AM
yesterday worked fine 3x280x, today if i start sg ati crash “Display driver stopped responding and has recovered”.
bigger 7gpu miner runs couple hours then whole pc freeze, no errors. win8.
normal sgminer 4.1.0 runs ok.
E: updated catalyst driver first pc seems ok now, no crashes.
bigger 7gpu miner runs couple hours then whole pc freeze, no errors. win8.
normal sgminer 4.1.0 runs ok.
E: updated catalyst driver first pc seems ok now, no crashes.
May 23, 2014, 09:15:48 AM
what does it mean by unauthorized worker?
illegal alien 
(didn't read the previous posts, so it is most likely a random answer) 
May 23, 2014, 09:14:56 AM
what does it mean by unauthorized worker?
May 23, 2014, 09:09:38 AM
Anyone figure out how to solo mine with this yet? Will the p c 0 thing work? Cuz it just uses his pool to verify blocks, n I can't put in a failover... So... Any ideas to try?
May 23, 2014, 09:03:35 AM
Here my first test.
I tried to do it as accurate as i could considering not the shown hashrate but the block solved.
2 rigs with exactly the same config (4x7950)
They were both mining in solo on the same wallet on a low diff coin (one block solved every 2.5 mins approx).
Results after apporx 8 hours of mining:
Rig1 (sph-sgminer)
Blocks solved: 92
Power consumption 450w
Hashrate displayed: 7.2Mh/s
Rig2 (x11-sgminer - donation disabled)
Blocks solved: 103 (+12%)
Power consumption: 480w (+6.7%)
Hashrate displayed: 9.9MH/s (+37.5%)
Going now to do the same test in pool configuration: 2 same rigs, same coin, same pool with prop payout, 2 different accounts to compare earnings.
I'll let you know after approx 8 hours of mining.
Results look good.I tried to do it as accurate as i could considering not the shown hashrate but the block solved.
2 rigs with exactly the same config (4x7950)
They were both mining in solo on the same wallet on a low diff coin (one block solved every 2.5 mins approx).
Results after apporx 8 hours of mining:
Rig1 (sph-sgminer)
Blocks solved: 92
Power consumption 450w
Hashrate displayed: 7.2Mh/s
Rig2 (x11-sgminer - donation disabled)
Blocks solved: 103 (+12%)
Power consumption: 480w (+6.7%)
Hashrate displayed: 9.9MH/s (+37.5%)
Going now to do the same test in pool configuration: 2 same rigs, same coin, same pool with prop payout, 2 different accounts to compare earnings.
I'll let you know after approx 8 hours of mining.
How did you go about disabling the donation?
May 23, 2014, 08:57:29 AM
On the 5830 n 5850 cards, mine wasn't any better either, then I changed the - W to 128 instead of 256, and let it write you a new bin file instead of copying the one you've been using... and that upped em about 25%... Really strange I know...
Also for the guy with all the hardware errors, I think this uses more RAM... how much do you have? Might wanna throw another stick in ;-)
Also for the guy with all the hardware errors, I think this uses more RAM... how much do you have? Might wanna throw another stick in ;-)
May 23, 2014, 08:36:05 AM
if theres also someone that cant change pool management by p-c-0, do a pool - change strategy - failover (literaly write "failover") , worked for me 
gpl cant be locked, ever
gpl cant be locked, ever
May 23, 2014, 08:26:54 AM
Same shit with sgminer
Try to remove -g2 from your .bat
I tried, same thing...
May 23, 2014, 07:25:37 AM
May 23, 2014, 07:12:03 AM
нормально, только выхлопа нет от этого майнера кроме хэшрейта
R9 270x 1460->2200 на пуле
ЧЯНТД?
May 23, 2014, 07:05:10 AM
with cards 5830,5850,5870 i am not getting any increase ?! other cards get cca 40% more hashrate , but 5xxx series seam unaffected.
anyone managed better?!
anyone managed better?!
Same for me on my 5850 and 5670.
It worked for me... I get 1900mhs with one 5870 card.. clocks 880/1250
Im running 5 cards at almost 10mhs total now...
..oh, and my 5850 is getting about 1500mhs
BUT I did left out the "-g 4" command... with that command... instant crash...
Jump to: