2% is a bit, but the evil that frequent switching between pools kills the entire profit.
Dev must come up with another method of donation.
Topic: [ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster - page 21. (Read 102473 times)
May 22, 2014, 04:04:05 PM
May 22, 2014, 04:02:53 PM
Loving this so far, have four Powercolor 280x @ 1100/1550 and getting average of 3.3+ Mh/s 
http://i76.photobucket.com/albums/j36/hlxbravo/What.jpg
Obviously P C 0
http://i76.photobucket.com/albums/j36/hlxbravo/What.jpg
Obviously P C 0
May 22, 2014, 03:50:23 PM
One more method to disable 2% donate pool: block TCP-port 7903 on your router/firewall and this pool looks dead in sgminer.
May 22, 2014, 03:48:35 PM
нормально, только выхлопа нет от этого майнера кроме хэшрейта
May 22, 2014, 03:39:28 PM
developer has a magician. I admire his talent. My respect for him. Sorry for my english. 
May 22, 2014, 03:37:08 PM
Can someone tell me how to make the sgminer.conf file and where to add this file, and how to start without this 2%
Thanks
the fuck to you 40% gain little Thanks
May 22, 2014, 03:34:01 PM
Quote from: Pencha, post: 6577900, member: 321105
He is using multiple proxy's, no way to find out all IP's.
Nope
It only uses this port, not sure about address.
I don't feel sorry for 2%, but I don't understand what makes this pool, there is almost only pool messages and no accepted.
Code:
x11-sgminer 4.1.0g - Started: [2014-05-23 00:31:42]
----------------------------------------------------------------------------
(5s):3.994M (avg):3.890Mh/s | A:0 R:0 HW:0 WU:0.050/m
ST: 1 SS: 0 NB: 8 LW: 158 GF: 0 RF: 0
Connected to multiple pools with block change notify
Block: 412da07e... Diff:497 Started: [00:33:03] Best share: 0.641
----------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 64.0C 1233RPM | 1.957M/2.063Mh/s | R: 0.0% HW:0 WU:0.000/m xI:300
GPU 1: 67.0C 2780RPM | 1.966M/2.063Mh/s | R: 0.0% HW:0 WU:0.050/m xI:300
----------------------------------------------------------------------------
[00:32:36] Stratum from Pool 0 requested work restart
[00:32:38] Pool 0 difficulty changed to 0.052
[00:32:38] Stratum from Pool 0 requested work restart
[00:32:40] Network diff set to 478
[00:32:40] Stratum from Pool 1 detected new block
[00:32:53] Pool 0 difficulty changed to 0.050
[00:32:53] Stratum from Pool 0 requested work restart
[00:32:55] Stratum from Pool 0 requested work restart
[00:33:00] Pool 0 difficulty changed to 0.051
[00:33:00] Stratum from Pool 0 requested work restart
[00:33:01] Stratum from Pool 0 requested work restart
[00:33:03] Network diff set to 497
[00:33:03] Stratum from Pool 1 detected new block
May 22, 2014, 03:25:11 PM
...
Can we implement this P>C>0 sequence in the starting .bat file?
Can we implement this P>C>0 sequence in the starting .bat file?
In Windows - try adding to "hosts" (windows\system32\drivers\etc) this: 127.0.0.1 hirop2pool.girino.org
May 22, 2014, 03:17:51 PM
does this program works with rental rig or not? if yes, how am I going to do it?
May 22, 2014, 03:13:36 PM
May 22, 2014, 03:10:36 PM
where do u get this program?
May 22, 2014, 02:59:28 PM
IFMI workaround & Pool guard in cgwatcher is working 100%
working very sexy...
working very sexy...
May 22, 2014, 02:58:29 PM
Don't I feel stupid now... I had accidentally deleted the kernel parameter in the config and blindly copied that between the x11 miners... lol, sorry for bloating this thread . This was error from a user desperately needing sleep, not dev error 
thanks for pointing it out Dripac.
However taking advantage of open source like this, not cool.
It works now with a nice hash increase.
. This was error from a user desperately needing sleep, not dev error thanks for pointing it out Dripac.However taking advantage of open source like this, not cool.
It works now with a nice hash increase.
May 22, 2014, 02:52:32 PM
While I like what the author did, he is still violating copyright law and stealing from the guys who originally wrote the code. I would encourage everyone to use the IFMI workaround to remove his pool, or simply BLOCK the IPs of the pools he's connecting to.
He is using multiple proxy's, no way to find out all IP's. 
May 22, 2014, 02:28:20 PM
This miner totally fucked up my rig! This is what I get now:
Now my miner crashes doing anything at all that requires the gpu, normal sgminer mining x11, cgminer for keccak and even distributed.net... wtf happened to my rig? I have tried with reinstalling fresh version of the original sgminer for dark (not this one), old cgminer for keccak, reinstalled drivers... what next? reinstall os? anyone else getting this?
my setup is 3x7950 running win7.
Now my miner crashes doing anything at all that requires the gpu, normal sgminer mining x11, cgminer for keccak and even distributed.net... wtf happened to my rig? I have tried with reinstalling fresh version of the original sgminer for dark (not this one), old cgminer for keccak, reinstalled drivers... what next? reinstall os? anyone else getting this?
my setup is 3x7950 running win7.
Are you sure you're on the right kernal?? I've had the error-4 before, even with that the other GPU's still mine.
May 22, 2014, 02:25:28 PM
Try this :
right click on my computer/properties/advanced system settings /environment variables / delete this 2 lines if u have it . After delete (if u have it) restart computer and start mining again .
right click on my computer/properties/advanced system settings /environment variables / delete this 2 lines if u have it . After delete (if u have it) restart computer and start mining again .
May 22, 2014, 02:17:20 PM
error -4 is low memory . Put more memory on your rig than u can mining or first try restart rig ...
i also figured error -4 means low memory... but that does not make any sense at all and thats what made me worried. I have 8gb and I have been mining like this since december. And yes obviously I restarted, I have even uninstalled and reinstalled drivers but still get errors on every program that requires gpu.
May 22, 2014, 02:13:50 PM
While I like what the author did, he is still violating copyright law and stealing from the guys who originally wrote the code. I would encourage everyone to use the IFMI workaround to remove his pool, or simply BLOCK the IPs of the pools he's connecting to.
Sorry, OP, I'd gladly donate for source code, but potentially malicious, entirely illegal code is a fail. Try making it 0%, giving out source code, and you'd get more of a donation from me than you'd ever make with your 2%.
Sorry, OP, I'd gladly donate for source code, but potentially malicious, entirely illegal code is a fail. Try making it 0%, giving out source code, and you'd get more of a donation from me than you'd ever make with your 2%.
May 22, 2014, 02:11:32 PM
error -4 is low memory . Put more memory on your rig than u can mining or first try restart rig ...
May 22, 2014, 02:01:19 PM
This miner totally fucked up my rig! This is what I get now:
http://i.imgur.com/Uc4DywY.jpg
Now my miner crashes doing anything at all that requires the gpu, normal sgminer mining x11, cgminer for keccak and even distributed.net... wtf happened to my rig? I have tried with reinstalling fresh version of the original sgminer for dark (not this one), old cgminer for keccak, reinstalled drivers... what next? reinstall os? anyone else getting this?
my setup is 3x7950 running win7.
http://i.imgur.com/Uc4DywY.jpg
Now my miner crashes doing anything at all that requires the gpu, normal sgminer mining x11, cgminer for keccak and even distributed.net... wtf happened to my rig? I have tried with reinstalling fresh version of the original sgminer for dark (not this one), old cgminer for keccak, reinstalled drivers... what next? reinstall os? anyone else getting this?
my setup is 3x7950 running win7.
Jump to: