this option "--difficulty-multiplier x" still work with the miner?
some pool have the diff value that keeps on increasing
I have this function disabled some pool have the diff value that keeps on increasing
Topic: [ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster - page 9. (Read 102476 times)
May 27, 2014, 03:25:38 AM
May 27, 2014, 03:12:39 AM
this option "--difficulty-multiplier x" still work with the miner?
some pool have the diff value that keeps on increasing
some pool have the diff value that keeps on increasing
May 27, 2014, 02:57:26 AM
Hello. I have a problem with this miner. Miner does not work correctly on the pools. I have 2 pool, 1 - basic, 2 - alternate, a miner works a few minutes to 1, and then switched to 2, leaving only one pool, then everything is OK. But I need 2 pool
May 26, 2014, 08:47:15 PM
anyone know how to get this working on PIMP OS?
May 26, 2014, 06:36:48 PM
Mix the gpu can afect the rig? I had 3 gigabyte 280x and one of them fail. I want to buy a new 280x, but i dont know how can affect in the rig put a new card 280X(can be xfx, msi, asus, etc)
Note: What manufacturer you recommend for mix? Thanks
PowerColor + ASUS Works fineNote: What manufacturer you recommend for mix? Thanks
Also, lol, 6950 + 7970 too
May 26, 2014, 05:00:51 PM
Mix the gpu can afect the rig? I had 3 gigabyte 280x and one of them fail. I want to buy a new 280x, but i dont know how can affect in the rig put a new card 280X(can be xfx, msi, asus, etc)
Note: What manufacturer you recommend for mix? Thanks
Note: What manufacturer you recommend for mix? Thanks
May 26, 2014, 03:59:37 PM
any help runing this with defult bamt commands?(intergrate into bamt)
mine start etc....
i installed it but have to start manully and i want to run it but defult mine commands any help?
mine start etc....
i installed it but have to start manully and i want to run it but defult mine commands any help?
I have the 2% donation version running in BAMT 1.6.2 automatically. 7970, 7950, R9 270
-I downloaded the 2% version for BAMT from the OP to my PC. If it isn't there anymore I can link the file here.
-Made a backup of 'sgminer' in the opt/miners folder named 'sgminerBACK'
-Downloaded WinSCP
-SSH'd into BAMT rig as root,
-In WinSCP navigate to opt/miners/sgminer
-Upload the file from the Step 1 into this folder and overwrite the orginal file
-Delete ALL BIN files from folder and restart mining session.
That will get it working, now we need to take out the donation.
Terminal>screen -r> P>C>0>Enter (This will need to be done every restart of the machine or change to the conf file)
Now that we have removed the donation we need to change the auto restart every 9 hours.
terminal> cd /etc/crontab
Remove Line item "0 */9 * * * root /sbin/coldreboot"
Ctrl+O
Ctrl+X
Let me know if this works, I've done it numerous times, but never written it out.
May 26, 2014, 02:32:29 PM
MIN,
Can you share your conf file?
Can you share your conf file?
May 26, 2014, 02:25:28 PM
Try using Elun's version for fixed difficulty and other bugfixes.
ok I do that , but , this miner not mine on 2 pool same time . ^^'
oh ok ! thank you so much
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 26, 2014, 01:42:23 PM
Try using Elun's version for fixed difficulty and other bugfixes.
ok I do that , but , this miner not mine on 2 pool same time . ^^'
May 26, 2014, 12:51:02 PM
Try using Elun's version for fixed difficulty and other bugfixes.
ok I do that , but , this miner not mine on 2 pool same time . ^^'
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 26, 2014, 12:32:47 PM
Try using Elun's version for fixed difficulty and other bugfixes.
May 26, 2014, 11:48:00 AM
Doesn't work on ASUS 280X .... around 5% increase hashrate
Doesn't work hmm!!!!!!
this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release
I'd say it does work, very nicely actually
Can you share your settings pleas ?
I can not get pass 3.1
Well that`s a hardware problem, i got a fan dead on 2 cards and can`t find replacement for them, right now i got some regular fans zippy tied on top of the non working ones.
lasybear version was compiled by remember the 5th ecc..., he seems an old member, we can trust him i suppose..
May 26, 2014, 11:47:41 AM
Hi , this miner work good but I don't see GPU fan and temp ... Somebody have the same problem or a response ?
Thank so much
Work good with 6 x r9 290 on windows 8.1 . I download the driver from windows update and I have no problem
http://hpics.li/395a0e6
Thank so much
Work good with 6 x r9 290 on windows 8.1 . I download the driver from windows update and I have no problem
http://hpics.li/395a0e6
May 26, 2014, 11:30:22 AM
finally i installed it on my pimp
here is manual
in terminal type
pmupdate or pimpupdate
after run it again
and choose 13 to install mod x11 miner
after choose 1 to update poolmanager
and done
enjoy
here is manual
in terminal type
pmupdate or pimpupdate
after run it again
and choose 13 to install mod x11 miner
after choose 1 to update poolmanager
and done
enjoy
May 26, 2014, 11:15:36 AM
Doesn't work on ASUS 280X .... around 5% increase hashrate
Doesn't work hmm!!!!!!
this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release
I'd say it does work, very nicely actually
Can you share your settings pleas ?
I can not get pass 3.1
Well that`s a hardware problem, i got a fan dead on 2 cards and can`t find replacement for them, right now i got some regular fans zippy tied on top of the non working ones.
May 26, 2014, 10:50:05 AM
Doesn't work on ASUS 280X .... around 5% increase hashrate
Doesn't work hmm!!!!!!
this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release
I'd say it does work, very nicely actually
Can you share your settings pleas ?
I can not get pass 3.1
Well that`s a hardware problem, i got a fan dead on 2 cards and can`t find replacement for them, right now i got some regular fans zippy tied on top of the non working ones.
May 26, 2014, 10:42:36 AM
Doesn't work on ASUS 280X .... around 5% increase hashrate
Doesn't work hmm!!!!!!
this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release
I'd say it does work, very nicely actually
Can you share your settings pleas ?
I can not get pass 3.1
There you go
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"shares" : "0",
"auto-fan" : true,
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1160",
"gpu-fan" : "0-85",
"gpu-platform" : "0",
"gpu-memclock" : "1450",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "1.200",
"intensity" : "19",
"temp-target" : "80",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"thread-concurrency" : "8192",
"no-pool-disable" : true
}
May 26, 2014, 10:17:49 AM
Doesn't work on ASUS 280X .... around 5% increase hashrate
Doesn't work hmm!!!!!!
this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release
I'd say it does work, very nicely actually
Can you share your settings pleas ?
I can not get pass 3.1
May 26, 2014, 10:15:50 AM
which amd driver should we use 13.12 or 14.4 with a 290?
For 7970(280X), there is no speed difference. The openCL version of 13.12 and 14.4 is the same.
Jump to: