how can we tell what our hashrate is?
Calling gethashespersec on the debug console.
Topic: [ANN][YAC] yacoin: yet another altcoin. START is now. - page 66. (Read 346684 times)
Calling gethashespersec on the debug console.
how can we tell what our hashrate is?
Orphan Tears!
http://www.youtube.com/watch?v=ma4KlFLho6c
{
"account" : "",
"category" : "orphan",
"amount" : 48.60000000,
"confirmations" : 0,
"generated" : true,
"txid" : "b0012cd056e54a0b2e3453bf80fadedd5b4fd99a05883036c063b2ecf31afc95",
"time" : 1368043384,
"timereceived" : 1368043385
},
{
"account" : "",
"category" : "orphan",
"amount" : 47.75000000,
"confirmations" : 0,
"generated" : true,
"txid" : "95f3cb7e7b762054b0f7f2c122301d79ed7d3cc91b9f23943125ed7df690ecbd",
"time" : 1368044932,
"timereceived" : 1368044933
}
http://www.youtube.com/watch?v=ma4KlFLho6c
{
"account" : "",
"category" : "orphan",
"amount" : 48.60000000,
"confirmations" : 0,
"generated" : true,
"txid" : "b0012cd056e54a0b2e3453bf80fadedd5b4fd99a05883036c063b2ecf31afc95",
"time" : 1368043384,
"timereceived" : 1368043385
},
{
"account" : "",
"category" : "orphan",
"amount" : 47.75000000,
"confirmations" : 0,
"generated" : true,
"txid" : "95f3cb7e7b762054b0f7f2c122301d79ed7d3cc91b9f23943125ed7df690ecbd",
"time" : 1368044932,
"timereceived" : 1368044933
}
I, ladies and gentlemen, sentenced to the use of a socks proxy, have mined my first block! Praise the lord!
I'm back
found a few blocks
now have ~300 YAC
all from a lowly Q6600
found a few blocks
now have ~300 YAC
all from a lowly Q6600
Orphan Tears!
http://www.youtube.com/watch?v=ma4KlFLho6c
{
"account" : "",
"category" : "orphan",
"amount" : 48.60000000,
"confirmations" : 0,
"generated" : true,
"txid" : "b0012cd056e54a0b2e3453bf80fadedd5b4fd99a05883036c063b2ecf31afc95",
"time" : 1368043384,
"timereceived" : 1368043385
},
{
"account" : "",
"category" : "orphan",
"amount" : 47.75000000,
"confirmations" : 0,
"generated" : true,
"txid" : "95f3cb7e7b762054b0f7f2c122301d79ed7d3cc91b9f23943125ed7df690ecbd",
"time" : 1368044932,
"timereceived" : 1368044933
}
http://www.youtube.com/watch?v=ma4KlFLho6c
{
"account" : "",
"category" : "orphan",
"amount" : 48.60000000,
"confirmations" : 0,
"generated" : true,
"txid" : "b0012cd056e54a0b2e3453bf80fadedd5b4fd99a05883036c063b2ecf31afc95",
"time" : 1368043384,
"timereceived" : 1368043385
},
{
"account" : "",
"category" : "orphan",
"amount" : 47.75000000,
"confirmations" : 0,
"generated" : true,
"txid" : "95f3cb7e7b762054b0f7f2c122301d79ed7d3cc91b9f23943125ed7df690ecbd",
"time" : 1368044932,
"timereceived" : 1368044933
}
My luck has ran out it seems, hit 6 orphans in a row this past hour.
Even with the port forwarded on my router I can't seem to connect to more than 8 peers.
Oh and a shout out to those that send donated to me. Thanks!
Oh and a shout out to those that send donated to me. Thanks!
Check the machine's own native firewall, maybe?
-MarkM-
All firewalls are disabled (Windows, F-Secure and the port is forwarded to the correct internal ip in the router)
Even with the port forwarded on my router I can't seem to connect to more than 8 peers.
Oh and a shout out to those that send donated to me. Thanks!
Oh and a shout out to those that send donated to me. Thanks!
Check the machine's own native firewall, maybe?
-MarkM-
I'm LOL'ing so hard now.. My i3 haven't found a block in 2 hrs and my i7 found 3 orphaned blocks, checked my laptop with the pentium dual-core at 2.20ghz and it mined a blocked... 
and the i7 has 61 active connections compared to 8 on the laptop
and the i7 has 61 active connections compared to 8 on the laptop
mining for 12 hours in my Phenom II x4 955 in 2 cores, NO OC...
9 blocks, 2 stales -> 673 YAKs.
9 blocks, 2 stales -> 673 YAKs.
So, instead of getting raped by GPU farms, we are now getting raped by multi-CPU server farms
No, just the CPUs on GPU farms.
Probably you're getting raped by GPU farms, too. You don't need to change the kernel from cgminer or reaper all that much to GPU mine this coin right now, and at the current value of N I would wager that most GPUs get 1000+ KH/s.
Wrong... it isn't using standard scrypt algo... you can mine with gpu but non of your shares will be accepted by the network.
I'm aware it's running block header hashes with keccak and chacha20 -- but all you need to do is port them to GPU kernel that comes with cgminer/reaper.
https://github.com/ckolivas/cgminer/blob/master/scrypt130302.cl
The keccak/chacha20 implementation he took from scrypt-jane is here
https://github.com/floodyberry/scrypt-jane/blob/master/code/scrypt-jane-hash_keccak.h
https://github.com/floodyberry/scrypt-jane/blob/master/code/scrypt-jane-mix_chacha.h
Edit: You need to play with the lookup_gap and thread_concurrency to get the best performance, too.
The nfactor thing is quite easily ported, I had made the nFactor worked with cgminer, however i have no experience dealing with opencl and nor do i speak scrypt (or keccak, chacha) fluently.
Non programmer butting in. Are any of you actually mining on gpu's at this point or are you just brainstorming what you can do to compile it so it should work?
I'm sure it's been answered but how do you see mining statistics?
connection were important back then when we were getting orphans, now when we don't get anything they mean nothing.
I believe a lot of it has to do with luck. My 32 core opteron setup has had 13 orphans 0 blocks, and my i5 670 (dual core /w hyperthreading) has 2 blocks/2 orphans in 3 hours of mining. Or it could be that the 3.4ghz clock rapes the opterons and that's why 
. Who knows?
. Who knows?Compare the numbers of connections that they have, maybe?
-MarkM-
Both have 8 connections each. How would I increase the number of connections?
just got my 12th block for 47.67 YAC, woohoo
What OS? What CPU? How many hashes wallet reports with gethashespersec?
CPU : intel i5 2500 k cpu @ 3.30 ghz
Hash rate with gethashespersec : 67180
Even with the port forwarded on my router I can't seem to connect to more than 8 peers.
Oh and a shout out to those that send donated to me. Thanks!
Oh and a shout out to those that send donated to me. Thanks!
May be a silly question, but is your Windows Firewall turned on?
Nope and my third party firewall (bundled with F-secure anti-virus) is disabled as well. Thanks for trying
If you are using Win binary downloaded from MEGA, keep on restarting YAC wallet until it connects to 8+ remote nodes. It might take a few tries but it worked for me.
50 connections now and slowly going up but still not even 1 orphan, LOL, I guess mining with 10 kHashes is already a history.
Lol I got 2 orphans already but my hasrate is above yours (somewhere between 18k and 120k).
I restarted it 10 times now and never get above 8 connections. Which is really weird as I have 10 connections defined in my yacoin.conf already:
Quote
addnode=82.211.30.212
addnode=78.21.9.49
addnode=76.115.8.101
addnode=124.149.56.205
addnode=178.130.36.81
addnode=82.6.77.126
addnode=106.187.55.212
addnode=81.202.104.33
addnode=84.200.17.178
addnode=88.204.169.242
rpcuser=user
rpcpassword=x
rpcallowip=127.0.0.1
rpcallowip=192.168.1.2
rpcallowip=192.168.1.3
rpcpallowip=192.168.1.4
rpcport=8108
port=7688
daemon=1
server=1
gen=1
addnode=78.21.9.49
addnode=76.115.8.101
addnode=124.149.56.205
addnode=178.130.36.81
addnode=82.6.77.126
addnode=106.187.55.212
addnode=81.202.104.33
addnode=84.200.17.178
addnode=88.204.169.242
rpcuser=user
rpcpassword=x
rpcallowip=127.0.0.1
rpcallowip=192.168.1.2
rpcallowip=192.168.1.3
rpcpallowip=192.168.1.4
rpcport=8108
port=7688
daemon=1
server=1
gen=1
(I know the rpcallows are redundant for me)
So, instead of getting raped by GPU farms, we are now getting raped by multi-CPU server farms
No, just the CPUs on GPU farms.
Probably you're getting raped by GPU farms, too. You don't need to change the kernel from cgminer or reaper all that much to GPU mine this coin right now, and at the current value of N I would wager that most GPUs get 1000+ KH/s.
Wrong... it isn't using standard scrypt algo... you can mine with gpu but non of your shares will be accepted by the network.
I'm aware it's running block header hashes with keccak and chacha20 -- but all you need to do is port them to GPU kernel that comes with cgminer/reaper.
https://github.com/ckolivas/cgminer/blob/master/scrypt130302.cl
The keccak/chacha20 implementation he took from scrypt-jane is here
https://github.com/floodyberry/scrypt-jane/blob/master/code/scrypt-jane-hash_keccak.h
https://github.com/floodyberry/scrypt-jane/blob/master/code/scrypt-jane-mix_chacha.h
Edit: You need to play with the lookup_gap and thread_concurrency to get the best performance, too.
The nfactor thing is quite easily ported, I had made the nFactor worked with cgminer, however i have no experience dealing with opencl and nor do i speak scrypt (or keccak, chacha) fluently.
you all might check your conf files, I've copie a version from somewhere where it used rcpallowip and not rpcallowip
Please post a copy of your config file.
Right now is this but before it was with wrong spelled rcp/rpc, I've found about it actually in your orphan thread.
addnode=82.211.30.212
addnode=78.21.9.49
addnode=76.115.8.101
addnode=124.149.56.205
addnode=178.130.36.81
addnode=82.6.77.126
addnode=106.187.55.212
addnode=81.202.104.33
addnode=84.200.17.178
addnode=88.204.169.242
rpcuser=user
rpcpassword=x
rpcallowip=127.0.0.1
rpcallowip=192.168.1.2
rpcallowip=192.168.1.3
rpcpallowip=192.168.1.4
rpcport=8108
port=7688
daemon=1
server=1
gen=0
If you are using that you are actualy not mining because gen=0 means no mining! You need all those lines only if you are using extrenal miner.
I used that config and it works, I think that when you launch it from the command prompt specifying gen=1 it overrides the config file settings.
yep, gen=1 when launching gives me generate=true in getmininginfo
just got my 12th block for 47.67 YAC, woohoo
>12 hours and already >22000 blocks, database size ca. 50 MB. I wonder what it will be like in one year.. of course if YAC will be alive
Jump to: