Antminer B3 Bytom Mining First review - page 21.

akorsar

newbie

Activity: 8

Merit: 0

Quote from: tw0rak on May 08, 2018, 12:18:28 AM

Guyz - I tried to change speed of the fans...
This shit is screeaming like a pig in my basement and there is no need to be like that - chips have just around 45°C.

U used bitmain-fan-ctrl and pwm in SSH, but this shit doesnt made a change. It doesnt have any fan-ctrl or what?

Could somebody help?
How much temperature could this chips have?
Thinking about giving there some computer fans...

I suggest to disconnect front fan (that what I have done) till they release firmware update. It will drop noise level 50% plus I put under the unit noise cancellation pad. It helped another 10%. Hopefully it helps.

akorsar

newbie

Activity: 8

Merit: 0

Quote from: BoC_2017 on May 07, 2018, 09:42:41 PM

Quote from: akorsar on May 07, 2018, 05:07:32 PM

Any body knows how to get Bytoms from Bytom Wallet to exchange? Or how to sell them from Bytom Wallet?
Please advise.

You will NOT be able to move BTM Tokens from the Bytom Wallet until they change from ERC20 token to a "Main net" type token. Then the exchanges will have to list that new type of BTM token on their exchanges. At that point in time you will be able to move to an exchange. Until then you are in a HODL mode with the tokens in your Bytom wallet until Bytom makes that switch.

This is very similar to what is / going to happen with EOS in June. If you have EOS tokens they are currently ERC20 tokens. When they go to EOS "main net" then they are still EOS tokens but will be converted from an ERC20 type to a "main net" type.

Hope this makes sense and I'm using proper terminology.

Now if you are mining on AntPool - you CANNOT use the BTM wallet address that starts with "BM" because that is NOT an ERC20 BTM address.

So what d o you do? If you have any exchange account listed in below link - you can then get your BTM (ERC20) deposit / receive address and use it for the AntPool address in your subaccount.

https://coinmarketcap.com/currencies/bytom/#markets

Finally, I just looked at my Antpool subaccount and I am currently getting a pay out of BTM to my ERC20 Exchange account!!! Very cool!!!

Thank you very much for your clean explanation. Have your money cleared on exchange? I have still have 2 transaction pending on Antpool and nothing on exchange. Please advise.

shid0

newbie

Activity: 7

Merit: 0

Quote from: leeb18509 on May 07, 2018, 09:52:05 PM

Finally a payout from Antpool as well. 237 BTM..although it still looks like some BS. They're paying me 237 out of my 584 balance which only accounts for yesterday and todays mining. The 345 left is what I mined on the first day when the pool was hosed and not counting any earnings on the dashboard, about 20 hours worth. But I was relieved when a balance of 340 BTM suddenly showed up a day later so I switched back from UUpool to Antpool. Except they're seemingly ignoring that balance and that day of mining??? Did anyone get paid yet for mining Friday the 4th thru Sat. the 5th?

Did you send it to an ERC20 wallet for any exchange?

Kalyst69

jr. member

Activity: 147

Merit: 1

On Bytom blog about ERC20 and Mainnet adresses :

Regarding the specific scheme for the conversion of the main network assets Bytom (BTM) users, please pay close attention to the official update of Bytom!
Gate.io has released a bytom (BTM) user swap announcement, which says as follows:
Bytom mainnet has been launched and we have integrated it in gate.io. we will swap the BTM ERC20 tokens to Bytom mainnet asset for all urers.
In the follow-up, more exchanges and wallets will support swap for Bytom users. Please pay close attention to the official follow-up announcements for specific exchange plans. Do not trust third parties to misrepresent the information and guard against fraud.

tw0rak

hero member

Activity: 600

Merit: 501

Guyz - I tried to change speed of the fans...
This shit is screeaming like a pig in my basement and there is no need to be like that - chips have just around 45°C.

U used bitmain-fan-ctrl and pwm in SSH, but this shit doesnt made a change. It doesnt have any fan-ctrl or what?

Could somebody help?
How much temperature could this chips have?
Thinking about giving there some computer fans...

BoC_2017

newbie

Activity: 65

Merit: 0

Quote from: leeb18509 on May 07, 2018, 09:52:05 PM

Finally a payout from Antpool as well. 237 BTM..although it still looks like some BS. They're paying me 237 out of my 584 balance which only accounts for yesterday and todays mining. The 345 left is what I mined on the first day when the pool was hosed and not counting any earnings on the dashboard, about 20 hours worth. But I was relieved when a balance of 340 BTM suddenly showed up a day later so I switched back from UUpool to Antpool. Except they're seemingly ignoring that balance and that day of mining??? Did anyone get paid yet for mining Friday the 4th thru Sat. the 5th?

Same situation here. I actually had my first sub account created, was mining to it on Friday (wasn't sure if I was actually mining or not).
Saturday came and after flip flopping between Antpool and UUPool I went back to Antpool. My original sub account was no longer listed! So now I thought I wasted mining time to a now non existent sub account. So I created a second sub account and started mining with that on Saturday.
Sunday rolls around and I have balance in my second account (as expected and it actually shows a balance) and all of a sudden my original sub account is listed and it has a balance (from the Friday mining)!

To your point - I have not had that original mining amount paid yet out of my first sub account from Friday.

To be continued I'm sure...

BoC_2017

newbie

Activity: 65

Merit: 0

Quote from: leeb18509 on May 07, 2018, 09:52:05 PM

Finally a payout from Antpool as well! 237 BTM..

Feels good! Lots of work to figure all of this craziness out between Antpool and UUPool! Was quite the learning experience but seems to have paid off!

leeb18509

newbie

Activity: 37

Merit: 0

Finally a payout from Antpool as well. 237 BTM..although it still looks like some BS. They're paying me 237 out of my 584 balance which only accounts for yesterday and todays mining. The 345 left is what I mined on the first day when the pool was hosed and not counting any earnings on the dashboard, about 20 hours worth. But I was relieved when a balance of 340 BTM suddenly showed up a day later so I switched back from UUpool to Antpool. Except they're seemingly ignoring that balance and that day of mining??? Did anyone get paid yet for mining Friday the 4th thru Sat. the 5th?

BoC_2017

newbie

Activity: 65

Merit: 0

Quote from: mhdg61 on May 07, 2018, 04:08:40 PM

Hi, could you help me out how to get a antpool Bytom wallet address? Where and how can I get that wallet address?

Quote from: BoC_2017 on May 07, 2018, 12:49:17 PM

Quote from: shahabz on May 07, 2018, 12:05:15 PM

Quote from: mindtrip on May 07, 2018, 09:35:03 AM

I can confirm UUPOOL payouts were received. I also spoke to bitmain Antpool engineers over the weekend and can confirm even though the web UI shows 0 blocks they have in fact fixed the pool and it is hitting blocks there is now coins in my antpool account so i think every one is now safe to use antpool again

Wallet address in Antpool must begin with 0x or BM?

I'm using address that begins with

0X for Antpool - from an exchange
BM for UUPool - from Bytom Wallet

Antpool should be the "0X" since they state it is using the ERC20 token address
I know UUPool is correct address since I already have received BTM into that "BM" / Bytom wallet from them.

Go to the Bytom.io site and read the manual and download the wallet for your specific operating system.
https://bytom.io/wallet/

BoC_2017

newbie

Activity: 65

Merit: 0

Quote from: akorsar on May 07, 2018, 05:07:32 PM

Any body knows how to get Bytoms from Bytom Wallet to exchange? Or how to sell them from Bytom Wallet?
Please advise.

See my info in REPLY #127

BoC_2017

newbie

Activity: 65

Merit: 0

Quote from: akorsar on May 07, 2018, 05:07:32 PM

Any body knows how to get Bytoms from Bytom Wallet to exchange? Or how to sell them from Bytom Wallet?
Please advise.

You will NOT be able to move BTM Tokens from the Bytom Wallet until they change from ERC20 token to a "Main net" type token. Then the exchanges will have to list that new type of BTM token on their exchanges. At that point in time you will be able to move to an exchange. Until then you are in a HODL mode with the tokens in your Bytom wallet until Bytom makes that switch.

This is very similar to what is / going to happen with EOS in June. If you have EOS tokens they are currently ERC20 tokens. When they go to EOS "main net" then they are still EOS tokens but will be converted from an ERC20 type to a "main net" type.

Hope this makes sense and I'm using proper terminology.

Now if you are mining on AntPool - you CANNOT use the BTM wallet address that starts with "BM" because that is NOT an ERC20 BTM address.

So what d o you do? If you have any exchange account listed in below link - you can then get your BTM (ERC20) deposit / receive address and use it for the AntPool address in your subaccount.

https://coinmarketcap.com/currencies/bytom/#markets

Finally, I just looked at my Antpool subaccount and I am currently getting a pay out of BTM to my ERC20 Exchange account!!! Very cool!!!

samshanna

newbie

Activity: 15

Merit: 0

Anyone mining direct to like Cryptopia yet? I just think they don't want miners going direct and then selling from their exchange. I think it will still work won't it?

lucasbira

newbie

Activity: 16

Merit: 0

Can someone tell me if Antminer B3 is still a good choice for the next few months?

I'm between 3 options:

Two Baikal BK-B for $ 2700
One Baikal BK-X for $ 2700
One Bitman B3 for $ 2350

Thanks.

akorsar

newbie

Activity: 8

Merit: 0

Any body knows how to get Bytoms from Bytom Wallet to exchange? Or how to sell them from Bytom Wallet?
Please advise.

mhdg61

newbie

Activity: 6

Merit: 0

Cryptopia mentioned don't use for mining pool for their address. I know Bittrex's Sia coin address is working for mining pool but Cryptopia asked for not using mining pool. Any suggestions? Thnaks!

Quote from: Truthchanter on May 07, 2018, 04:18:00 PM

Quote from: mhdg61 on May 07, 2018, 04:08:40 PM

Hi, could you help me out how to get a antpool Bytom wallet address? Where and how can I get that wallet address?

On cryptopia exchange you can get the 0x address for bytom

Truthchanter

sr. member

Activity: 689

Merit: 253

Quote from: mhdg61 on May 07, 2018, 04:08:40 PM

Hi, could you help me out how to get a antpool Bytom wallet address? Where and how can I get that wallet address?

Quote from: BoC_2017 on May 07, 2018, 12:49:17 PM

Quote from: shahabz on May 07, 2018, 12:05:15 PM

Quote from: mindtrip on May 07, 2018, 09:35:03 AM

I can confirm UUPOOL payouts were received. I also spoke to bitmain Antpool engineers over the weekend and can confirm even though the web UI shows 0 blocks they have in fact fixed the pool and it is hitting blocks there is now coins in my antpool account so i think every one is now safe to use antpool again

Wallet address in Antpool must begin with 0x or BM?

I'm using address that begins with

0X for Antpool - from an exchange
BM for UUPool - from Bytom Wallet

Antpool should be the "0X" since they state it is using the ERC20 token address
I know UUPool is correct address since I already have received BTM into that "BM" / Bytom wallet from them.

On cryptopia exchange you can get the 0x address for bytom

mhdg61

newbie

Activity: 6

Merit: 0

Hi, could you help me out how to get a antpool Bytom wallet address? Where and how can I get that wallet address?

Quote from: BoC_2017 on May 07, 2018, 12:49:17 PM

Quote from: shahabz on May 07, 2018, 12:05:15 PM

Quote from: mindtrip on May 07, 2018, 09:35:03 AM

I can confirm UUPOOL payouts were received. I also spoke to bitmain Antpool engineers over the weekend and can confirm even though the web UI shows 0 blocks they have in fact fixed the pool and it is hitting blocks there is now coins in my antpool account so i think every one is now safe to use antpool again

Wallet address in Antpool must begin with 0x or BM?

I'm using address that begins with

0X for Antpool - from an exchange
BM for UUPool - from Bytom Wallet

Antpool should be the "0X" since they state it is using the ERC20 token address
I know UUPool is correct address since I already have received BTM into that "BM" / Bytom wallet from them.

UMICHStatistican

newbie

Activity: 7

Merit: 0

I am looking at the number of shares discarded vs. accepted and I think the number discarded seems a bit high (although I'm not quite sure, hence my post). After about 10 minutes running on uupool, I'm seeing Accepted: 25 and Discarded 680 (utility: 1.1, get works: 27, and H/S (avg) is 774.78). Does this seem right to anyone? I'd be interested in comparing what others are showing. If this seems bad, any other suggestions on how I can fix this? I'm using:

url: stratum+tcp://btm.uupool.cn:9221
worker: .
password: x

Thanks!

leeb18509

newbie

Activity: 37

Merit: 0

Quote from: BoC_2017 on May 07, 2018, 12:49:17 PM

Quote from: shahabz on May 07, 2018, 12:05:15 PM

Quote from: mindtrip on May 07, 2018, 09:35:03 AM

I can confirm UUPOOL payouts were received. I also spoke to bitmain Antpool engineers over the weekend and can confirm even though the web UI shows 0 blocks they have in fact fixed the pool and it is hitting blocks there is now coins in my antpool account so i think every one is now safe to use antpool again

Wallet address in Antpool must begin with 0x or BM?

I'm using address that begins with

0X for Antpool - from an exchange
BM for UUPool - from Bytom Wallet

Antpool should be the "0X" since they state it is using the ERC20 token address
I know UUPool is correct address since I already have received BTM into that "BM" / Bytom wallet from them.

Have you been paid out by Antpool to your BTM exchange because I haven't ever yet, and I'm wondering if I have a dashboard setting screwed up? I really don't get the sub-accounts and why they're necessary.

leeb18509

newbie

Activity: 37

Merit: 0

Quote from: Kaisa104 on May 07, 2018, 01:21:53 PM

Quote from: BoC_2017 on May 07, 2018, 12:49:17 PM

I'm using address that begins with

0X for Antpool - from an exchange
BM for UUPool - from Bytom Wallet

Antpool should be the "0X" since they state it is using the ERC20 token address
I know UUPool is correct address since I already have received BTM into that "BM" / Bytom wallet from them.

Can you use exchange address for UUPool Huh

BoC_2017 is correct. I don't believe you can use an exchange or ERC20 token (0x...) address for UUpool because when I had one in as the "worker" the pool showed "dead". It wasn't until I replaced it with the "bm" official wallet address that UUpool showed "alive". But...that was early on Friday and there was a lot of craziness going on so who knows? Guess you could try it.

Topic: Antminer B3 Bytom Mining First review - page 21. (Read 9477 times)