How loud is this thing compared to an S9 or GPU set up?
I bought one but hasn't arrived yet Sad, may have to wait until after the weekend as it doesn't seem like it's going to make it past customs by end of today.
I think it´s prettty loud but it depends
Topic: Antminer B3 Bytom Mining First review - page 24. (Read 9477 times)
Quote
Antpool 1.96MHs - you can see it at this link http://miningpoolstats.stream/bytom
1 960 000h/s / 780h/s = 2512 machines,
uupool 0.49Mhs
490 000 / 780 = 628 machines.
Total: 3140 machines.
1 960 000h/s / 780h/s = 2512 machines,
uupool 0.49Mhs
490 000 / 780 = 628 machines.
Total: 3140 machines.
Yeah, you are right. Sorry, didn't pay attention. I guess they have asics with same names or more powerful versions...
Let's see how it goes. I wonder how exchange will work.
The price of BTM is going down, though the profit is still looking very nice.
Quote
Around 3000pcs at this time connected and my and many others miners are in still in packages on its way.
Not sure where do you see 3000pcs. I can see about 1.4K at the moment. Though, this grew rapidly since morning while it was few hundreds only. So I assume it's all relatively fair play by Bitmain so far.
Though, I am not sure if Antpool is working, so I've no idea why there are still around 900 asics on it...
Antpool 1.96MHs - you can see it at this link http://miningpoolstats.stream/bytom
1 960 000h/s / 780h/s = 2512 machines,
uupool 0.49Mhs
490 000 / 780 = 628 machines.
Total: 3140 machines.
I received payment from UUPool into the Bytom Wallet.
So, their website is correct that they will payout daily between 10 AM and 4 PM (their time in China) which = 10PM (EST) to 4 AM (EST).
I tried moving some using the Transaction area - however it shows an error when typing in any address that is not a BTM address. If the address starts with BM then I think it would work fine (or at least no error would show up).
I tried ERC20 address, BTM exchange addresses - all would give an error.
I'm just happy I received a deposit!
So, their website is correct that they will payout daily between 10 AM and 4 PM (their time in China) which = 10PM (EST) to 4 AM (EST).
I tried moving some using the Transaction area - however it shows an error when typing in any address that is not a BTM address. If the address starts with BM then I think it would work fine (or at least no error would show up).
I tried ERC20 address, BTM exchange addresses - all would give an error.
I'm just happy I received a deposit!
Quote
Around 3000pcs at this time connected and my and many others miners are in still in packages on its way.
Not sure where do you see 3000pcs. I can see about 1.4K at the moment. Though, this grew rapidly since morning while it was few hundreds only. So I assume it's all relatively fair play by Bitmain so far.
Though, I am not sure if Antpool is working, so I've no idea why there are still around 900 asics on it...
Sooo - 2500pcs sold in 1st batch...
Looks like they are intensively "testing" miners from next batches
http://miningpoolstats.stream/bytom
Around 3000pcs at this time connected and my and many others miners are in still in packages on its way...
Looks like they are intensively "testing" miners from next batches
http://miningpoolstats.stream/bytom
Around 3000pcs at this time connected and my and many others miners are in still in packages on its way...
Confirmed payment as well. Also transferred funds inside Bytom application, however it's not working for exchange addresses so far.
Update...Just got BTM payout from UUPool!! 
Sorry, Antpool sticking with this for the time being.
Sorry, Antpool sticking with this for the time being.
Had same issues with Antpool. Managed to connect only to stratum-btm.antpool.com:6666 (the other 2 are dead), it showed stats on Antpool and I was getting stable 700-80h/s, though even after 15-20 minutes, not shares have been received. Hence I've moved to uupool and it started showing a growing balance immediately. So I am sticking to it until Antpool will solve the issue.
However, http://miningpoolstats.stream/bytom is showing that Antpool has way bigger hashrate now...
Lets see
However, http://miningpoolstats.stream/bytom is showing that Antpool has way bigger hashrate now...
Lets see
Not sure, but it looks like I have some activity on my bytom windows wallet. Balance shows 147 BTM. If anybody can figure out how to send it to another address (exchange) it would be greatly appreciated. It's just a lot different than most other wallets.
Are you mining http://uupool.cn/ or Antpool?
He must be mining with UUPPOOL. Antpool is using ERC20 addresses only to my knowledge.
Which makes me second the questions is how do these get transferred to an exchange. Every exchange address Ive seen is also using ERC20 formatted addresses.
If you want to take a gamble with a few of your tokens from the BTM wallet, send them to a ERC20 address and see if they show up on the chain. Skeptical this will work though.
You need to do a new transaction, but when you try to do this it give lots of errors. If you figure out please advise.
Not sure, but it looks like I have some activity on my bytom windows wallet. Balance shows 147 BTM. If anybody can figure out how to send it to another address (exchange) it would be greatly appreciated. It's just a lot different than most other wallets.
Are you mining http://uupool.cn/ or Antpool?
Not sure, but it looks like I have some activity on my bytom windows wallet. Balance shows 147 BTM. If anybody can figure out how to send it to another address (exchange) it would be greatly appreciated. It's just a lot different than most other wallets.
On UUPool and haven't gotten a pay out yet. I'm in Central Time (8pm). Please keep us posted. Thanks!
From what I read on uupools website , they pay out from 10am to 4pm each day (pay out in queue, and this information is written in Chinese), which is 7pm to 1am PST. So they might start paying out today at 7pm. Lets see if people get paid.
Try this: https://www.youtube.com/watch?v=D3U_YPuN77g and set lower speed. Tell me If it works - i still dont have mine...
Thanks. I will give this a shot. Dont want to shut down at the moment since rewards are high and my connection to UUPOOL has been fickle.
Has anyone got payout from UUPOOL yet? Balance is getting high & Im sure we would all like to know if we can trust these operators.
Also there is 550+ miners on Antpool noe and no one is reporting rewards in their dashboard? I find this very hard to believe. How is there no info about this anywhere?
It doesnt seem that the miner monitors fan speed in this miner version. As far I can tell it runs the fans on full and completely skips the fan test cycle that usually occurs post boot with other Bitmain models.
It also runs incredible cool at just under 35 chip temps with sub 30 board temps. Thats with no cooling in a warm weather climate.
Obviously its because of the low wattage requirements. So are these fans total overkill for this miner?
Appears they slapped in stock S9 fans with no rpm governance or checks.
Can anyone confirm this?
It also runs incredible cool at just under 35 chip temps with sub 30 board temps. Thats with no cooling in a warm weather climate.
Obviously its because of the low wattage requirements. So are these fans total overkill for this miner?
Appears they slapped in stock S9 fans with no rpm governance or checks.
Can anyone confirm this?
Try this: https://www.youtube.com/watch?v=D3U_YPuN77g and set lower speed. Tell me If it works - i still dont have mine...
Thanks. I will give this a shot. Dont want to shut down at the moment since rewards are high and my connection to UUPOOL has been fickle.
Has anyone got payout from UUPOOL yet? Balance is getting high & Im sure we would all like to know if we can trust these operators.
Also there is 550+ miners on Antpool noe and no one is reporting rewards in their dashboard? I find this very hard to believe. How is there no info about this anywhere?
Hi, with uupool, were u able to get paid ? I see people report balance increasing but no one said anything about actually getting paid. Any information will be greatly appreciated, thanks !
I think the high rejects are due to us mining to china id like to try and get a US Pool setup ill dig around the code and see if i can get one to work in the next few days
Well, the site says it pays between 10am and 4pm and that's about 2 hours from now so I guess we'll find out. Fingers crossed..
Hi, with uupool, were u able to get paid ? I see people report balance increasing but no one said anything about actually getting paid. Any information will be greatly appreciated, thanks !
I think the high rejects are due to us mining to china id like to try and get a US Pool setup ill dig around the code and see if i can get one to work in the next few days
Hi,
I received my machine yesterday, but still did not start mining. Are you still mining with UUpool ? Is it possible that you could share some reviews with uupool (like whether hitting rewards, if they are paying out ect) ?
Any information would be helpful , thank you !
I received my machine yesterday, but still did not start mining. Are you still mining with UUpool ? Is it possible that you could share some reviews with uupool (like whether hitting rewards, if they are paying out ect) ?
Any information would be helpful , thank you !
So I was one of the lucky few to receive my B3 Early today and I wanted to post some of the initial problems with setting it up so far.
First Antpool seems to be the only pool online at the moment
Second the Domain name doesn't seem to resolve yet so for the URL you should use stratum+tcp://47.95.178.159:6666 for now until there domain resolves stratum-btm.antpool.com:6666
You can go on and manually create a worker name or antpool will automatically create one for you i used "MyAntPoolID.B3"
Miner Setup
Here is a screen shot of it running I was one of the first in the US to join antpool
And here it is coming online to Antpool
Antpool Growing
Tracking Network Hashrate
http://miningpoolstats.stream/bytom
Edit 5/4/18 Looks like antpool is down I recommend mining to UUPOOL for now
Use this for URL: stratum+tcp://btm.uupool.cn:9221
Worker: yourwallet address
First Antpool seems to be the only pool online at the moment
Second the Domain name doesn't seem to resolve yet so for the URL you should use stratum+tcp://47.95.178.159:6666 for now until there domain resolves stratum-btm.antpool.com:6666
You can go on and manually create a worker name or antpool will automatically create one for you i used "MyAntPoolID.B3"
Miner Setup
Here is a screen shot of it running I was one of the first in the US to join antpool
And here it is coming online to Antpool
Antpool Growing
Tracking Network Hashrate
http://miningpoolstats.stream/bytom
Edit 5/4/18 Looks like antpool is down I recommend mining to UUPOOL for now
Use this for URL: stratum+tcp://btm.uupool.cn:9221
Worker: yourwallet address
Thank you. I just did the same and now UUPOOL is working, rewards trickling in.
Hi, I received my machine yesterday and still has not started mining yet because I was not able to find a mining pool. Are you still mining with UUPOOL ? how is it going, getting any rewards ?
The other 609 miners either know something we dont or do not read these forums.
Antpool is PPS atm. So technically they owe for every share u submit no matter what. Their site does log total shares submitted. I can't see Bitmain screwing everyone over. I would bet they are finding blocks, just system not working out. They also say they will be paying in ERC 20 tokens.
Jump to: