how do that?
?? 
Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 111. (Read 125911 times)
set your fan speed at 25% before flashing.
how do that???
how do that?
?? 
After changing the low speed fan(2000rpm), the speed can not be recognized
Are you sure you flashed the custom firmware (from the start page), as I removed this fan speed check.
To check if you flashed the custom firmware: go to the minerAdvanced.cgi page and you should see the voltage control settings
I flashed the custom firmware .it's from upgrade to running (flash image )
Did I choose the wrong one? It should be run from there？
Seems correct. Make sure you flashed the right file. The webpage I talk about is "Miner Configuration" -> "Advanced settings"
After changing the low speed fan(2000rpm), the speed can not be recognized
Are you sure you flashed the custom firmware (from the start page), as I removed this fan speed check.
To check if you flashed the custom firmware: go to the minerAdvanced.cgi page and you should see the voltage control settings
I flashed the custom firmware .it's from upgrade to running (flash image )
Did I choose the wrong one? It should be run from there？
The D3 After replacing the fan no power, it's can not running
Not sure if I understand you, but you replaced the existing fans with other types. Which ones? Please show me the information from the kernel log so I can analyze the problem you have.
after running the firmware , machine ant miner's voice is still noice.The noise will get bigger in a moment
How do I change the voltage, where do you add the web page?to set
After changing the low speed fan(2000rpm), the speed can not be recognized
Are you sure you flashed the custom firmware (from the start page), as I removed this fan speed check.
To check if you flashed the custom firmware: go to the minerAdvanced.cgi page and you should see the voltage control settings
The D3 After replacing the fan no power, it's can not running
Not sure if I understand you, but you replaced the existing fans with other types. Which ones? Please show me the information from the kernel log so I can analyze the problem you have.
Thank you OP, i will definitely give this firmware a try.. if i can run these d3 more efficiently it would add up every month, saving costs.. im not sure if its worth voiding the warranty yet i will need to see how everything goes this week, or maybe just try on one d3. But either way, if everything works out be expecting some tips 
The D3 After replacing the fan no power, it's can not running
Not sure if I understand you, but you replaced the existing fans with other types. Which ones? Please show me the information from the kernel log so I can analyze the problem you have.
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
That's a great result! Which batch?
It's 1-15 Nov batch 19.3 GH/s submodel
Do u think is possible mod the firmware for other Antminer like L3+ and T9 ?
Yes but I will focus on the d3 first. I prefer to have l3+ or t9 to be able test it myself. Maybe I can buy one of the fee profit one day.
The D3 After replacing the fan no power, it's can not running
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
That's a great result! Which batch?
It's 1-15 Nov batch 19.3 GH/s submodel
Do u think is possible mod the firmware for other Antminer like L3+ and T9 ?
Yes but I will focus on the d3 first. I prefer to have l3+ or t9 to be able test it myself. Maybe I can buy one of the fee profit one day.
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
how to do that plzI have setup 462 with lowest ASIC voltage and fan 30%
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
how to do that plzI have setup 462 with lowest ASIC voltage and fan 30%
I cant get anything but default setting for asic V.
What is the magic spell ?
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
That's a great result! Which batch?
It's 1-15 Nov batch 19.3 GH/s submodel
Do u think is possible mod the firmware for other Antminer like L3+ and T9 ?
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
how to do that plzI have setup 462 with lowest ASIC voltage and fan 30%
i plugged wattmeter : my end november batch is 15 Ghz at 680 watts at the wall (Frequency : 419mhz , asic V. : default setting)
To resume i think the priority for next update is
Suggestion :
Wondering in miner status > Antminer > HW is the hardware error number ?
was scared this morning i get xxx error on one hasboard , i got to unplug pci reboot , without and re plug to fix
To resume i think the priority for next update is
Code:
- Not crazy fan at swithing pool & on fault statut (keep checked fan speed be perfect )
- Asic voltage fix
Suggestion :
Code:
- option to reboot on fault and/or ignore statut low hashrate for people with hashboard sometimes xxx...
- hard log page of last reboot, may be can use it to dont have fee at every reboot if ever did this hour.
- dont think it possible for control board but frequency setting per hashboard ?
Wondering in miner status > Antminer > HW is the hardware error number ?
was scared this morning i get xxx error on one hasboard , i got to unplug pci reboot , without and re plug to fix
Great suggestions! Voltage and frequency per board is possible so thanks for the suggestion
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
That's a great result! Which batch?
how I can fix the fan at 10 or 25% before install the beta firmware?
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
how to do that plz
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
i plugged wattmeter : my end november batch is 15 Ghz at 680 watts at the wall (Frequency : 419mhz , asic V. : default setting)
To resume i think the priority for next update is
Suggestion :
Wondering in miner status > Antminer > HW is the hardware error number ?
was scared this morning i get xxx error on one hasboard , i got to unplug pci reboot , without and re plug to fix
To resume i think the priority for next update is
Code:
- Not crazy fan at swithing pool & on fault statut (keep checked fan speed be perfect )
- Asic voltage fix
Suggestion :
Code:
- option to reboot on fault and/or ignore statut low hashrate for people with hashboard sometimes xxx...
- hard log page of last reboot, may be can use it to dont have fee at every reboot if ever did this hour.
- dont think it possible for control board but frequency setting per hashboard ?
Wondering in miner status > Antminer > HW is the hardware error number ?
was scared this morning i get xxx error on one hasboard , i got to unplug pci reboot , without and re plug to fix
Jump to: