Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 112. (Read 125911 times)
I was also working on figuring out how to get the miner to reboot as soon as the hashing rate would drop below a certain value. Since you are looking into adding an optimizing feature into the firmware, could you have a look into this too? So lets say, hashing rate drops below 13gh/s, trigger a save&apply somewhere (faster than reboot), or a reboot.
wow, the number of victims is growing rapidly.
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
Please enough of this. No one was a victim. It was clearly stated what the miner did and you bought it. Live with it. ASIC is a one trick pony.
Actually I also bored your depreciatory posts.
if the company had sold , %50 fewer unit D3 was a goldmine now. OK you are right. Thats not realistic. ignore it.
if the company had sold , %30 fewer unit , probably nobody would complain right now.
But They had sold more than needed, knowing the consequences as is now
No one could predict that but they realy could know that. .
we are not stupid as you imply.
but they fooled us willingly.
We are all frustrated D3 Antminer, and i understand you , and yes probably they know what they do, by selling so much d3 miner, may be we can hope for a good fork on x11 ,
and i m scared it will be same for l3+ soon , but it s not the topic here to debate about that please
The difficulty on litecoin just dropped 10% and there are also lots of other script coins that pay more than litecoin. L3+ will stay profitable until a better version comes out which isn't close just yet...
Instructions:
set the miner frequency at 400mhz and set your fan speed at 25% before flashing. After flashing, check the advanced settings page and start at the lowest voltage setting. From there increase your frequency to see how high you can go at the lowest voltage setting.
set the miner frequency at 400mhz and set your fan speed at 25% before flashing. After flashing, check the advanced settings page and start at the lowest voltage setting. From there increase your frequency to see how high you can go at the lowest voltage setting.
the fan is at 25%.. does it means 25% run on initial startup to eliminate the max rpm during startup?
What is the fan speed when at full hashing operation? remain at 25% or increases accordingly to running temperature?
p/s I am from a hot climate country..and running with natural air ventilation without AC
during startup it's fixed to 10% fan speed now. The percentage you give in is the speed at full hashing operation.
Instructions:
set the miner frequency at 400mhz and set your fan speed at 25% before flashing. After flashing, check the advanced settings page and start at the lowest voltage setting. From there increase your frequency to see how high you can go at the lowest voltage setting.
set the miner frequency at 400mhz and set your fan speed at 25% before flashing. After flashing, check the advanced settings page and start at the lowest voltage setting. From there increase your frequency to see how high you can go at the lowest voltage setting.
the fan is at 25%.. does it means 25% run on initial startup to eliminate the max rpm during startup?
What is the fan speed when at full hashing operation? remain at 25% or increases accordingly to running temperature?
p/s I am from a hot climate country..and running with natural air ventilation without AC
My intention is never to argue with anyone.
I am sharing the change.org link because this is the only way to reach Bitmain .
if we can get their attention, maybe they offer a solution , probably it will be the most proper way .
I never judge anoyone's thougths.
I expect same thing for myself.
if we dont want to same thing for L3+ , We definetely have to get their attention about selling limitless unit.
I'm sorry for the inconvenience.
Well said. Changes start with one person who is willing to take actions. There will be many more followers and there will be NAY sayers. It is important to stick to your beliefs and move forward.
Hi,
I'm newbii on this forum and most of the time just read a lot without posting but I just want to thank you for your hard work for making all D3 owner a bit more optimistic !!
I will wait a bit for you're next release and try your firmware update.
Thanks again from a poor French who pay his electricity higher than you in US or elsewhere...
I'm newbii on this forum and most of the time just read a lot without posting but I just want to thank you for your hard work for making all D3 owner a bit more optimistic !!
I will wait a bit for you're next release and try your firmware update.
Thanks again from a poor French who pay his electricity higher than you in US or elsewhere...
wow, the number of victims is growing rapidly.
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
Please enough of this. No one was a victim. It was clearly stated what the miner did and you bought it. Live with it. ASIC is a one trick pony.
Actually I also bored your depreciatory posts.
if the company had sold , %50 fewer unit D3 was a goldmine now. OK you are right. Thats not realistic. ignore it.
if the company had sold , %30 fewer unit , probably nobody would complain right now.
But They had sold more than needed, knowing the consequences as is now
No one could predict that but they realy could know that. .
we are not stupid as you imply.
but they fooled us willingly.
We are all frustrated D3 Antminer, and i understand you , and yes probably they know what they do, by selling so much d3 miner, may be we can hope for a good fork on x11 ,
and i m scared it will be same for l3+ soon , but it s not the topic here to debate about that please
My intention is never to argue with anyone.
I am sharing the change.org link because this is the only way to reach Bitmain .
if we can get their attention, maybe they offer a solution , probably it will be the most proper way .
I never judge anoyone's thougths.
I expect same thing for myself.
if we dont want to same thing for L3+ , We definetely have to get their attention about selling limitless unit.
I'm sorry for the inconvenience.
wow, the number of victims is growing rapidly.
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
Please enough of this. No one was a victim. It was clearly stated what the miner did and you bought it. Live with it. ASIC is a one trick pony.
Actually I also bored your depreciatory posts.
if the company had sold , %50 fewer unit D3 was a goldmine now. OK you are right. Thats not realistic. ignore it.
if the company had sold , %30 fewer unit , probably nobody would complain right now.
But They had sold more than needed, knowing the consequences as is now
No one could predict that but they realy could know that. .
we are not stupid as you imply.
but they fooled us willingly.
We are all frustrated D3 Antminer, and i understand you , and yes probably they know what they do, by selling so much d3 miner, may be we can hope for a good fork on x11 ,
and i m scared it will be same for l3+ soon , but it s not the topic here to debate about that please
wow, the number of victims is growing rapidly.
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
Please enough of this. No one was a victim. It was clearly stated what the miner did and you bought it. Live with it. ASIC is a one trick pony.
Actually I also bored your depreciatory posts.
if the company had sold , %50 fewer unit D3 was a goldmine now. OK you are right. Thats not realistic. ignore it.
if the company had sold , %30 fewer unit , probably nobody would complain right now.
But They had sold more than needed, knowing the consequences as is now
No one could predict that but they realy could know that. .
we are not stupid as you imply.
but they fooled us willingly.
nice , i just install it with success , fan got high a short moment , like it did when switching pool.
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
Yes the high fan is still a bug that needs to be fixed... Looking at the profits at the moment I would advice to run at the lowest voltage setting and adjust the frequency so you see almost no HW errors. I guess you will end up somewhere between 400mhz and 450mhz at the lowest voltage setting.
thanks will plug wattmeter tomorrow
if you are planning to the logo on webpage with a fun one , let me know i can have fun with photoshop
the scale of original one is bad webpage is very bad
i have defualt setting to when i try to get lowest asic set up
A fun logo would be a nice feature to add. I agree the webpages are really ugly. Not top priority right now, but I might improve the webpages a bit as well
reserved
I Think that blissz have the same hope that all D3's buyer have...... the best performance of this miner..... he is working hard to mod the firmware.... voltage... fan... algo... i think that now all people must support it but dont ask continuosly "when you..." " how many algos... " is possibile.... " the work is long.....
you are right!
wow, the number of victims is growing rapidly.
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
Please enough of this. No one was a victim. It was clearly stated what the miner did and you bought it. Live with it. ASIC is a one trick pony.
yes that why they sold it some month before , as they know you will have a amazing profit at moment of bought it
nice , i just install it with success , fan got high a short moment , like it did when switching pool.
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
Yes the high fan is still a bug that needs to be fixed... Looking at the profits at the moment I would advice to run at the lowest voltage setting and adjust the frequency so you see almost no HW errors. I guess you will end up somewhere between 400mhz and 450mhz at the lowest voltage setting.
thanks will plug wattmeter tomorrow
if you are planning to the logo on webpage with a fun one , let me know i can have fun with photoshop
the scale of original one is bad webpage is very bad
i have defualt setting to when i try to get lowest asic set up
wow, the number of victims is growing rapidly.
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition
Please enough of this. No one was a victim. It was clearly stated what the miner did and you bought it. Live with it. ASIC is a one trick pony.
nice , i just install it with success , fan got high a short moment , like it did when switching pool.
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
Yes the high fan is still a bug that needs to be fixed... Looking at the profits at the moment I would advice to run at the lowest voltage setting and adjust the frequency so you see almost no HW errors. I guess you will end up somewhere between 400mhz and 450mhz at the lowest voltage setting.
nice , i just install it with success , fan got high a short moment , like it did when switching pool.
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
i get 21~30 nov batch
15Ghs at 400
what do you recommand for asic voltage , i didnt see any clue on 1st page at your origininal post
Do you think that, the other algo thing will work ?
Some say , it is totally impossible
Some say , it is totally impossible
Quite a good result I would say for the November batch. At stock settings my October batch did 13.5 Mh/s @ 900 watts. :/ Currently it's doing 14.8 Mh/s at 720 watts.
The fee is time based as I want to add balancing strategy to the firmware later
hope miner will not stop if you fee time cannot connect to your pool or else reason,
a good option to had is auto reboot if miner hangs or going to fault statut
No it can't hang to the fee pool as it will always switch after a defined time. Just test it. If you find a bug with the dev pool let me know so I can fix it.
Jump to: