[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 154.

ldh37

member

Activity: 116

Merit: 10

Quote from: shaxs on March 07, 2014, 02:43:57 AM

Well bummer. Guess I will be returning this and trying to find a better one.

How about this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16817182082&Tpk=N82E16817182082

ATX12V v2.31 / EPS12V v2.92
100-240V
80 PLUS Platinum Certified
Efficiency up to 94%

Yes, it should - do the math from the previous example:

+3.3V@20A, +5V@20A, [email protected], [email protected], [email protected]
> 89%, Up to 94%

12v*45.5A=546W
min > 89%
546*.89=485.94W
max = 94%
546*.94=513.24W

s1lverbox

legendary

Activity: 2324

Merit: 1039

Quote from: AbiTxGroup on March 07, 2014, 02:40:08 AM

Quote from: shaxs on March 07, 2014, 02:18:19 AM

Quote from: klondike_bar on March 06, 2014, 09:16:14 PM

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

I have a Corsair 500 CXM lined up for one Antminer. I read at over clocked they pull 400w. Will this PSU be good enough?

The Corsair CX500M, according to NewEgg, has the following specs:

Quote

ATX12V v2.3
Modular
80 PLUS BRONZE Certified
100 - 240 V 47 - 63 Hz
+3.3V@25A, +5V@20A, +12V@38A, [email protected], +5VSB@3A

12v x 38A = 456W

401W is 88% of the 456W, so I would not overclock the S1 using this PS.

EDIT NOTE: klondike_bar was faster than I was in posting. Same conclusion though.

i had cx500 and s1 over clocked to 393mhz and there was no problem at all. No reboots, 200gh/s average and no issue what so ever. I had 5 units like that and no problem what so ever.

death_hawk

newbie

Activity: 22

Merit: 0

If mine doesn't ship today I'm tempted to see if Bitmain can squeeze in another unit.
Why I left one coupon code is beyond me...

shaxs

full member

Activity: 168

Merit: 100

Well bummer. Guess I will be returning this and trying to find a better one.

How about this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16817182082&Tpk=N82E16817182082

ATX12V v2.31 / EPS12V v2.92
100-240V
80 PLUS Platinum Certified
Efficiency up to 94%
[email protected]

[email protected] = 546 * lowest efficiency of 89% = 486. That should work right?

AbiTxGroup

sr. member

Activity: 447

Merit: 250

Quote from: shaxs on March 07, 2014, 02:18:19 AM

Quote from: klondike_bar on March 06, 2014, 09:16:14 PM

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

I have a Corsair 500 CXM lined up for one Antminer. I read at over clocked they pull 400w. Will this PSU be good enough?

The Corsair CX500M, according to NewEgg, has the following specs:

Quote

ATX12V v2.3
Modular
80 PLUS BRONZE Certified
100 - 240 V 47 - 63 Hz
+3.3V@25A, +5V@20A, +12V@38A, [email protected], +5VSB@3A

12v x 38A = 456W

401W is 88% of the 456W, so I would not overclock the S1 using this PS.

EDIT NOTE: klondike_bar was faster than I was in posting. Same conclusion though.

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: shaxs on March 07, 2014, 02:18:19 AM

Quote from: klondike_bar on March 06, 2014, 09:16:14 PM

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

I have a Corsair 500 CXM lined up for one Antminer. I read at over clocked they pull 400w. Will this PSU be good enough?

Its a gamble, since there is only 450W available on the 12V rail. You might get away with stock speeds, but if you overclock it theres a high chance you will get chips disabling, random reboots, or low hashrates from a lack of wattage over 12V

shaxs

full member

Activity: 168

Merit: 100

Quote from: klondike_bar on March 06, 2014, 09:16:14 PM

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

I have a Corsair 500 CXM lined up for one Antminer. I read at over clocked they pull 400w. Will this PSU be good enough?

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: midyatspor on March 06, 2014, 11:31:47 PM

same thing here but I am using a Corsair CS750, got 2 units both are going crazy for few min and then they die., there is a red light on one of the units and one flashing green light next to it.

Quote from: klondike_bar on March 06, 2014, 09:16:14 PM

Quote from: Quantus on March 06, 2014, 07:59:21 PM

Quote from: n3xus on March 06, 2014, 07:45:28 PM

Quote from: Quantus on March 06, 2014, 07:01:36 PM

I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?

What size power supply are you using ? If your supply is under powered it will shut off after a few min

600 watt Corsair. But i guess it could be bad. I'll go buy a new one in the morning Sad

I did't even check dose this company do returns/replacements?

how long do you hold down the reset button?

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

2 units on one PSU? that would be your issue if so

midyatspor

member

Activity: 107

Merit: 10

same thing here but I am using a Corsair CS750, got 2 units both are going crazy for few min and then they die., there is a red light on one of the units and one flashing green light next to it.

Quote from: klondike_bar on March 06, 2014, 09:16:14 PM

Quote from: Quantus on March 06, 2014, 07:59:21 PM

Quote from: n3xus on March 06, 2014, 07:45:28 PM

Quote from: Quantus on March 06, 2014, 07:01:36 PM

I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?

What size power supply are you using ? If your supply is under powered it will shut off after a few min

600 watt Corsair. But i guess it could be bad. I'll go buy a new one in the morning Sad

I did't even check dose this company do returns/replacements?

how long do you hold down the reset button?

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: Quantus on March 06, 2014, 07:59:21 PM

Quote from: n3xus on March 06, 2014, 07:45:28 PM

Quote from: Quantus on March 06, 2014, 07:01:36 PM

I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?

What size power supply are you using ? If your supply is under powered it will shut off after a few min

600 watt Corsair. But i guess it could be bad. I'll go buy a new one in the morning Sad

I did't even check dose this company do returns/replacements?

how long do you hold down the reset button?

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

Quantus

legendary

Activity: 883

Merit: 1005

Quote from: n3xus on March 06, 2014, 07:45:28 PM

Quote from: Quantus on March 06, 2014, 07:01:36 PM

I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?

What size power supply are you using ? If your supply is under powered it will shut off after a few min

600 watt Corsair. But i guess it could be bad. I'll go buy a new one in the morning Sad

I did't even check dose this company do returns/replacements?

how long do you hold down the reset button?

n3xus

newbie

Activity: 44

Merit: 0

Quote from: Quantus on March 06, 2014, 07:01:36 PM

I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?

What size power supply are you using ? If your supply is under powered it will shut off after a few min

bitcoin_miner

full member

Activity: 144

Merit: 100

my antminer s1 arrived in my home at several days ago.. now mining in my home ..
thanks bitmaintech

ipxtreme

sr. member

Activity: 262

Merit: 250

Quote from: MrTeal on March 06, 2014, 04:11:38 PM

Quote from: AbiTxGroup on March 06, 2014, 03:59:39 PM

Quote from: Rock6.3 on March 06, 2014, 11:03:42 AM

I ordered and paid for Antminer S1 on Monday directly from BitMainTech.Com.

They promise shipping within 48 hours.

It is now Thursday and my order is still unshipped.

A PM sent asking for information told me not to worry and asked for my order number. Then no further reply.

Who sent you a pm? I ordered several antminers on Monday and the order was confirmed paid right away, but still has not shipped.

The status shows: Paid, Unshipped, Valid

The forum should offer additional functionality to thread starters that allow them to spawn a pop-up with info and a check-box confirming some information. Here I'm thinking something along the lines of
"I confirm I have read at least two of the pages in this thread, and my post does not contain the same question that has been asked and answered 100 times before."

The units ship when they ship, and the updating of information or uploading of a tracking number lags that. Often units can arrive days before an order gets marked as shipped on the website.

+1

GordonBM

full member

Activity: 137

Merit: 100

Quote from: Quantus on March 06, 2014, 07:01:36 PM

I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?

Have you tried resetting?
There is a little button under the white cable.

Quantus

legendary

Activity: 883

Merit: 1005

I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?

minternj

sr. member

Activity: 434

Merit: 250

They input the tracking info manually. Sometimes I get tracking info after getting the actual package.

Cheeseater

sr. member

Activity: 351

Merit: 250

Bitmain always ships. Usually get tracking the day before it arrives, hell they ship quick faster than newegg. If your order is confirmed you'll get your Ant. And if your not happy with the product or service there's always BFL Shocked

MrTeal

legendary

Activity: 1274

Merit: 1004

Quote from: AbiTxGroup on March 06, 2014, 03:59:39 PM

Quote from: Rock6.3 on March 06, 2014, 11:03:42 AM

I ordered and paid for Antminer S1 on Monday directly from BitMainTech.Com.

They promise shipping within 48 hours.

It is now Thursday and my order is still unshipped.

A PM sent asking for information told me not to worry and asked for my order number. Then no further reply.

Who sent you a pm? I ordered several antminers on Monday and the order was confirmed paid right away, but still has not shipped.

The status shows: Paid, Unshipped, Valid

The forum should offer additional functionality to thread starters that allow them to spawn a pop-up with info and a check-box confirming some information. Here I'm thinking something along the lines of
"I confirm I have read at least two of the pages in this thread, and my post does not contain the same question that has been asked and answered 100 times before."

The units ship when they ship, and the updating of information or uploading of a tracking number lags that. Often units can arrive days before an order gets marked as shipped on the website.

AbiTxGroup

sr. member

Activity: 447

Merit: 250

Quote from: Rock6.3 on March 06, 2014, 11:03:42 AM

I ordered and paid for Antminer S1 on Monday directly from BitMainTech.Com.

They promise shipping within 48 hours.

It is now Thursday and my order is still unshipped.

A PM sent asking for information told me not to worry and asked for my order number. Then no further reply.

Who sent you a pm? I ordered several antminers on Monday and the order was confirmed paid right away, but still has not shipped.

The status shows: Paid, Unshipped, Valid

Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 154. (Read 346284 times)