[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 152.

Rock6.3

member

Activity: 70

Merit: 10

Quote from: DevonMiner on March 07, 2014, 03:18:35 PM

Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.

Anybody else experiencing slight delays?

I ordered on Monday.
Shipped on Friday.

ldh37

member

Activity: 116

Merit: 10

Quote from: shaxs on March 07, 2014, 01:39:41 PM

Quote from: ldh37 on March 07, 2014, 01:31:11 PM

Quote from: Pcpoet on March 07, 2014, 01:00:00 PM

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues. The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it. I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip. Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Speaking of the PSU jumper, I have some 22GA solid tinned copper wire. That should work fine for a jumper yes?

As long as it fits snug/makes good contact then yes. On one of my PSUs I'm using a piece of 22AWG copper strand wire that I tinned the ends with solder and it works fine.

AbiTxGroup

sr. member

Activity: 447

Merit: 250

Quote from: DevonMiner on March 07, 2014, 03:18:35 PM

Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.

Anybody else experiencing slight delays?

Be careful with posts about shipping delays, there are several here that can't wait to pounce on such posts.

I finally received a tracking number for my miners ordered on Monday and it shows that it took just shy of 84 hours from once my order was valid to actually being shipped (picked up by UPS).

Aside from the first order I placed back in Dec, this is the only time the shipping was delayed. That is out of nine different shipments within my miners group. It is unusual, but it happens. It's 5:30AM Saturday there in China so more orders will be shipped later today.

ionux

full member

Activity: 140

Merit: 100

Quote from: pjcltd on March 07, 2014, 02:59:27 PM

Hi BITMAN

I places an order today for another miner
0012014030715235017709I2pdPX0651
i paid in under the hour but its say the order has expired!!!
can you please have a look for me

Thanks
Paul

Hey Paul, I don't work for these guys but you can look up the transaction on blockchain.info to see if it was confirmed or not. Search for the address you sent the bitcoin to.

DevonMiner

sr. member

Activity: 471

Merit: 250

Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.

Anybody else experiencing slight delays?

Pcpoet

full member

Activity: 156

Merit: 100

Cryptocurrency Rules man!

Quote from: ionux on March 07, 2014, 02:28:31 PM

Bah! I love/hate the price changes! Just paid 1.16 BTC two days ago! Cheesy

As a side note, Bitmaintech has amazingly fast processing & shipping. Nice work, guys! +1

+2 I recieve my 2 antminer last week and it was good transaction.

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

Hi BITMAN

I places an order today for another miner
0012014030715235017709I2pdPX0651
i paid in under the hour but its say the order has expired!!!
can you please have a look for me

Thanks
Paul

ionux

full member

Activity: 140

Merit: 100

Bah! I love/hate the price changes! Just paid 1.16 BTC two days ago! Cheesy

As a side note, Bitmaintech has amazingly fast processing & shipping. Nice work, guys! +1

Jacko

full member

Activity: 182

Merit: 100

Quote from: joyyen on March 07, 2014, 02:07:52 PM

Hi i am new to antminer S1 and i cannot connect my browser to 192.168.1.99 which is my antminer ip

i try to change the TCP/IPV4 to

ip address : 192.168.1.188
subnet : 255.255.255.0
default gateway : 192.168.1.1

prefered DNS : 8.8.8.8
alternative dns : blank

and also try the default antminer tutorial

IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1

Both also no luck can anyone please help me thank you

Your default gateway is your routers address. if your router is 192.168.1.1 then you don't need to change anything as the Ant is on the same and you can just type the Ants address in your browser.

Pcpoet

full member

Activity: 156

Merit: 100

Cryptocurrency Rules man!

Quote from: ldh37 on March 07, 2014, 01:31:11 PM

Quote from: Pcpoet on March 07, 2014, 01:00:00 PM

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues. The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it. I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip. Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Thank you Idh37. Cheesy

joyyen

member

Activity: 99

Merit: 10

MMM EXTRA - THE RIGHT STEP TOWARDS THE GOAL

Hi i am new to antminer S1 and i cannot connect my browser to 192.168.1.99 which is my antminer ip

i try to change the TCP/IPV4 to

ip address : 192.168.1.188
subnet : 255.255.255.0
default gateway : 192.168.1.1

prefered DNS : 8.8.8.8
alternative dns : blank

and also try the default antminer tutorial

IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1

Both also no luck can anyone please help me thank you

shaxs

full member

Activity: 168

Merit: 100

Quote from: ldh37 on March 07, 2014, 01:31:11 PM

Quote from: Pcpoet on March 07, 2014, 01:00:00 PM

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues. The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it. I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip. Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Speaking of the PSU jumper, I have some 22GA solid tinned copper wire. That should work fine for a jumper yes?

loneknives

newbie

Activity: 7

Merit: 0

order 3 wish it get here by next week

Very easy to order at your site

ldh37

member

Activity: 116

Merit: 10

Quote from: Pcpoet on March 07, 2014, 01:00:00 PM

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues. The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it. I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip. Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Biffa

legendary

Activity: 3234

Merit: 1221

Why don't you fools ask them privately? Rather than out here for the whole world to see? FFS! They have email, they have PM, they even have a box when you place your order where you can put a request in. Roll Eyes

charles2k

sr. member

Activity: 326

Merit: 250

Quote from: CroverNo01 on March 07, 2014, 08:18:07 AM

Price drop is good price today Roll Eyes

Bitmain any news on EU Customs price ? would you accept to invoice 150USD per ant ?
Thanks

same question...

meornot69

member

Activity: 87

Merit: 10

Quote from: lowerjerzey on March 07, 2014, 09:31:59 AM

Quote from: meornot69 on March 07, 2014, 09:00:37 AM

you need to put some consumer on 5V cable, i have same PSU, and i put a old cdrom on 5V and never shut's down.

Are you sure? If this is really true, that is just stupid. Not every machine needs the 5v. If I build a GPU mining rig running off a usb flash drive, it won't need the 5v. 6 pin to the GPU, 8 pin to the cpu, and 20/24 pin to the MB all 12v.

yes i'm sure,
i have 2 Corsair VS Series VS650 650W , and if i'm not puting nothing on 5V they keep shuting down.

here is a link so you can figure out why
http://techreport.com/review/24897/the-big-haswell-psu-compatibility-list

this a short list of corsair PSU that need something on 5V:
CX600; VX (Legacy): VX450; VS: VS350, VS450, VS550, VS650

Pcpoet

full member

Activity: 156

Merit: 100

Cryptocurrency Rules man!

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

shaxs

full member

Activity: 168

Merit: 100

Quote from: s1lverbox on March 07, 2014, 03:18:37 AM

Quote from: AbiTxGroup on March 07, 2014, 01:40:08 AM

Quote from: shaxs on March 07, 2014, 01:18:19 AM

Quote from: klondike_bar on March 06, 2014, 08:16:14 PM

sounds like a PSU issue. I have a Corsair C600M with 552W of 12V power and it ran an overclocked antminer without problems. However, not all power supplies can push full capacity for 24/7 and some may not be able to hold more than 80% of the peak rating for a long time.

Try disconnecting power from the secondary blade and try again. If the device runs 90GH without problems but is having issues with running both blades then its a PSU issue

I have a Corsair 500 CXM lined up for one Antminer. I read at over clocked they pull 400w. Will this PSU be good enough?

The Corsair CX500M, according to NewEgg, has the following specs:

Quote

ATX12V v2.3
Modular
80 PLUS BRONZE Certified
100 - 240 V 47 - 63 Hz
+3.3V@25A, +5V@20A, +12V@38A, [email protected], +5VSB@3A

12v x 38A = 456W

401W is 88% of the 456W, so I would not overclock the S1 using this PS.

EDIT NOTE: klondike_bar was faster than I was in posting. Same conclusion though.

i had cx500 and s1 over clocked to 393mhz and there was no problem at all. No reboots, 200gh/s average and no issue what so ever. I had 5 units like that and no problem what so ever.

Good to know. I will test it out. If it doesnt work I will return to NewEgg via ShopRunner.

shaxs

full member

Activity: 168

Merit: 100

I bought a few of these.... we shall see how they will work.

http://www.newegg.com/Product/Product.aspx?Item=N82E16835132022

If you buy 2 or more they are only $6.39 each with promo code.

bgears b-Blaster 120 120mm Case Fan

120mm
2000 RPM 103 CFM
2 Ball
35 dBA

5 star rating after 54 reviews.

Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 152. (Read 346286 times)