[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 77.

samsonn25

hero member

Activity: 882

Merit: 1003

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

Better deal is 2 660 or 760 catch them with rebates is nice

jimmyl

full member

Activity: 211

Merit: 100

Quote from: Soros Shorts on April 11, 2014, 07:04:35 PM

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

I am familiar with this PSU as I use it on a bunch of Jupiters. You need to connect one of PCI-e connectors to the 12V output marked "CPU" on the PSU. For some reason if you don't draw any load from the 12V CPU output the PSU will shutdown at around 600W.

That would be the top right hand corner.

I tried that too. 1 PCI-E connected to top right corner. And 2 PCI-E connected to both, left and right of the bottom 3 PCI-E slots. Still trip.

bjalbert

full member

Activity: 166

Merit: 100

I thought they said next S1 batch was going to be today? Guess I will have to keep watching the site.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: klondike_bar on April 11, 2014, 07:16:06 PM

Quote from: mdude77 on April 11, 2014, 12:43:36 PM

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

There probably isn't enough power on the 12V rail to run 3 S1s. Check the specs of your PSU.

I'm running 3 OC'd S1s on a Rosewill 1300 gold and pulling about 1215 watts. Mine is rated at 108A on the 12V rail. > 87% efficiency, up to 92%.

M

I have a corsair AX1200 that is running on 213V power. It is able to handle 3 antminers tuned to 387.5MHz each. (I tuned one down to 381MHz to slightly lessen the load and because that one unit was just over 1% hw errors)

I think it's the 220V that makes the difference. Based on what I'm seeing with my 1300 @ 115V, I don't see how a 1200 would cut it @ 115V.

M

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: mdude77 on April 11, 2014, 12:43:36 PM

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

There probably isn't enough power on the 12V rail to run 3 S1s. Check the specs of your PSU.

I'm running 3 OC'd S1s on a Rosewill 1300 gold and pulling about 1215 watts. Mine is rated at 108A on the 12V rail. > 87% efficiency, up to 92%.

M

I have a corsair AX1200 that is running on 213V power. It is able to handle 3 antminers tuned to 387.5MHz each. (I tuned one down to 381MHz to slightly lessen the load and because that one unit was just over 1% hw errors)

Soros Shorts

donator

Activity: 1617

Merit: 1012

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

I am familiar with this PSU as I use it on a bunch of Jupiters. You need to connect one of PCI-e connectors to the 12V output marked "CPU" on the PSU. For some reason if you don't draw any load from the 12V CPU output the PSU will shutdown at around 600W.

AquaTron1

newbie

Activity: 11

Merit: 0

Have S1 overclocked with the 393.75freq settings and im pullin about 3.11 amps each a stock S1 should pull around 3 amps thats assuming your on 120v if you run 220v its less must have right setup for 220v.

jimmyl

full member

Activity: 211

Merit: 100

Quote from: dsheaffer on April 11, 2014, 11:41:43 AM

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

If it is the model below, it has a 104Amp 12V rail. Two S1s at stock (350W) and one OC'd (525W) = 102.08Amps. You are right at the max amperage for the 12V rail and if any of the units draws even slightly more that than this at any point, you will cause the PSU to go into shutdown / autoprotect mode.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817151109

Hope this helps

Thanks for the help.

If I run 3 stock ants, how much amp would I be running?

AquaTron1

newbie

Activity: 11

Merit: 0

Anyone here that order from 112bit.com this week get a confirmation on payment yet they havent responded back to any emails or pm's i have sent im sure there busy but its been three days and i have had no communication with them about my order. Sorry if this is off subject.

Thanks
AquaTron

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

There probably isn't enough power on the 12V rail to run 3 S1s. Check the specs of your PSU.

I'm running 3 OC'd S1s on a Rosewill 1300 gold and pulling about 1215 watts. Mine is rated at 108A on the 12V rail. > 87% efficiency, up to 92%.

M

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

Obviously test is to put the OC unit back to stock and see if it works. If so, you are overdrawing the PSU and will need to split up the units across multiple PSUs if you want to OC. I run 3 stock S1s per AX1200.

samsonn25

hero member

Activity: 882

Merit: 1003

Seasonics and Corsair are pretty strong though, I have run 750-760 watts for 2 regular ants off both brands 660 Platinum PSU, not for long periods though. Only a few days until the new 760s came in.

samsonn25

hero member

Activity: 882

Merit: 1003

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

While a stock ant pulls like 370-380 through a Platinum PSU. A GOLD is not as efficient and OC ants 10% use 20-25% more energy 18-20% use 35-40-45%+ more energy..

dsheaffer

member

Activity: 98

Merit: 10

Quote from: jimmyl on April 11, 2014, 11:31:14 AM

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

If it is the model below, it has a 104Amp 12V rail. Two S1s at stock (350W) and one OC'd (525W) = 102.08Amps. You are right at the max amperage for the 12V rail and if any of the units draws even slightly more that than this at any point, you will cause the PSU to go into shutdown / autoprotect mode.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817151109

Hope this helps

jimmyl

full member

Activity: 211

Merit: 100

Anyone running 3 S1 on a seasonic? I need help!

I keep getting the psu going into some sort of protection mode...ie no power after running for 10 minutes.

My PCI-E are plugged into the lower right 3 PCI-E slots.

Running 2 units seems ok. PSU is 1250W, 2 units stock, 1 unit OC 375.

qosmio

full member

Activity: 147

Merit: 100

Quote from: J_Dubbs on April 10, 2014, 02:25:15 PM

Anyone else order a few days ago but not get any shipping info??

in the past bitmain shipped faster, still waiting for update for my april 9 order

edit:
shipped

thank you

innoman

newbie

Activity: 42

Merit: 0

Quote from: gurki on April 10, 2014, 03:46:44 PM

Can you only order S1s with BTC? Is there a credit card option?

I've purchased an S1 and my S2 through 112bit.com--Juan G. (topminingcontracts on here) is much quicker to communicate with than bitmaintech directly. He doesn't take credit card directly but will do escrow. Instead, you order and then deposit money into an account (or wire it, if you choose... some banks have reasonable wire fees less than $15 but some are pretty overpriced).

There are several posts about 112bit if you don't want to take my word. The other options are eBay and Amazon but you probably won't get the best deals there. The best option is definitely using BTC. You can convert USD to BTC through like coinbase.com (or others, I am sure).

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: gurki on April 10, 2014, 03:46:44 PM

Can you only order S1s with BTC? Is there a credit card option?

From Bitmain directly you can only use BTC. You can buy from resellers though. For example, last time I looked there were some for sale from third parties on amazon.com

freebit13

hero member

Activity: 616

Merit: 500

I got Satoshi's avatar!

Quote from: dquancey on April 10, 2014, 03:34:57 AM

I'm looking at replacing the fans on the ants, as they're in my office and at full speed, can be a little too loud Grin

Now, will this fan suffice?

http://www.quietpc.com/nx-120-pwm

Or recommend a decent, quiet replacement?

Don't replace the original, simply add another, quieter fan on the other end, that'll slow down the main fan and make it quieter overall Wink

nottm28

hero member

Activity: 574

Merit: 500

Quote from: gurki on April 10, 2014, 03:46:44 PM

Can you only order S1s with BTC? Is there a credit card option?

No credit card option, BTC only. My recommendation would be to buy a coin on localbitcoins.com or some other reputable site.

Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 77. (Read 346286 times)