Does anyone know if it is possible to use 2 or 3 coupons on 1 order (1 single S2 miner)?
~ Luc
~ Luc
No, one coupon per miner in the order.
So if you have 3 coupons you have to have either three separate orders or one order with three items in it.
Topic: ANTMINER S2 Discussion and Support Thread - page 46. (Read 355730 times)
No, one coupon per miner in the order.
So if you have 3 coupons you have to have either three separate orders or one order with three items in it.
Does anyone know if it is possible to use 2 or 3 coupons on 1 order (1 single S2 miner)?
~ Luc
~ Luc
Oh crap, my batch 2 AntMiner S2 stopped working today, after 3 months of solid service.
We had a power outage, and after the power came back on the S2 was "dead". It wouldn't power on at all. I replaced the Enermax 1000W PSU with a Corsair AX1200i and the unit now powers up, but nothing shows on the LED screen and the unit doesn't register on the network. I know what the MAC address of the unit is and it doesn't show up on the network. I have tried two different micro-SD cards, neither of them work.
Not happy. Sent an email to Bitmain, hopefully they can help me out.
Do they use standard Beaglebone Blacks? Perhaps you could try replacing that. I stocked up on spare WR703N's and rPi's for my (former) Avalons and BitFury rigs and had to replace a few over time. Maybe I should buy some BB's too.We had a power outage, and after the power came back on the S2 was "dead". It wouldn't power on at all. I replaced the Enermax 1000W PSU with a Corsair AX1200i and the unit now powers up, but nothing shows on the LED screen and the unit doesn't register on the network. I know what the MAC address of the unit is and it doesn't show up on the network. I have tried two different micro-SD cards, neither of them work.
Not happy. Sent an email to Bitmain, hopefully they can help me out.
Oh crap, my batch 2 AntMiner S2 stopped working today, after 3 months of solid service.
We had a power outage, and after the power came back on the S2 was "dead". It wouldn't power on at all. I replaced the Enermax 1000W PSU with a Corsair AX1200i and the unit now powers up, but nothing shows on the LED screen and the unit doesn't register on the network. I know what the MAC address of the unit is and it doesn't show up on the network. I have tried two different micro-SD cards, neither of them work.
Not happy. Sent an email to Bitmain, hopefully they can help me out.
Do they use standard Beaglebone Blacks? Perhaps you could try replacing that. I stocked up on spare WR703N's and rPi's for my (former) Avalons and BitFury rigs and had to replace a few over time. Maybe I should buy some BB's too. We had a power outage, and after the power came back on the S2 was "dead". It wouldn't power on at all. I replaced the Enermax 1000W PSU with a Corsair AX1200i and the unit now powers up, but nothing shows on the LED screen and the unit doesn't register on the network. I know what the MAC address of the unit is and it doesn't show up on the network. I have tried two different micro-SD cards, neither of them work.
Not happy. Sent an email to Bitmain, hopefully they can help me out.
Oh crap, my batch 2 AntMiner S2 stopped working today, after 3 months of solid service.
We had a power outage, and after the power came back on the S2 was "dead". It wouldn't power on at all. I replaced the Enermax 1000W PSU with a Corsair AX1200i and the unit now powers up, but nothing shows on the LED screen and the unit doesn't register on the network. I know what the MAC address of the unit is and it doesn't show up on the network. I have tried two different micro-SD cards, neither of them work.
Not happy. Sent an email to Bitmain, hopefully they can help me out.
We had a power outage, and after the power came back on the S2 was "dead". It wouldn't power on at all. I replaced the Enermax 1000W PSU with a Corsair AX1200i and the unit now powers up, but nothing shows on the LED screen and the unit doesn't register on the network. I know what the MAC address of the unit is and it doesn't show up on the network. I have tried two different micro-SD cards, neither of them work.
Not happy. Sent an email to Bitmain, hopefully they can help me out.
investigation showed the connector had come away from the board. Now the holding plate is a good idea ... but there were a lot of screws to remove just to plug it back in!
I think Bitmain needs to have a talk with some of his assemblers-it looks like 1-2 connectors are not firmly attached (until it clicks!) in almost every machine. Mine had two totally out.
A minor thing, but as you said-you have to unscrew a bunch of screws and also move some board to get to the pesky connectors.
investigation showed the connector had come away from the board. Now the holding plate is a good idea ... but there were a lot of screws to remove just to plug it back in!
I think Bitmain needs to have a talk with some of his assemblers-it looks like 1-2 connectors are not firmly attached (until it clicks!) in almost every machine. Mine had two totally out.
A minor thing, but as you said-you have to unscrew a bunch of screws and also move some board to get to the pesky connectors.
Looks like Bitmain are doing better with the shipping issues at last ... received an S2 yesterday ... and that holding plate over the blades did the trick. Hashed straight out of the box. However, later I noticed that the intake fan for the PSU wasn't working ... investigation showed the connector had come away from the board. Now the holding plate is a good idea ... but there were a lot of screws to remove just to plug it back in!
Ghash loses money on the regular hardware miners to make it back on cloud hashing and reselling hash.
They aren't losing money, extra hashing power from users is just an help to raise hashrate an find more block/try to maximize earnings with luck periods.
thank you
Ghash loses money on the regular hardware miners to make it back on cloud hashing and reselling hash.
Finaly go back to ghash.io
On eligius.st, i have to wait 13 blocks found to be paid, so about 2 days.
On BTC guild, i have to pay fee.
On ghash.io, i'm instantly paid with no fee.
This explain why everybody [who cannot see a forest behind the trees] mine on ghash.io !
enjoy $650 to $560 trip for your BTC, courtesy of ghash controversy...
Very good, i can buy BTC with euro at a low price for sell them later ...
Don't forget, BTC = $450 one month before ...
There is no ghash controversy , ghash is now only 38%, one week before ghash was 48% ... check this please : https://blockchain.info/fr/pools?timespan=24hrs
Finaly go back to ghash.io
On eligius.st, i have to wait 13 blocks found to be paid, so about 2 days.
On BTC guild, i have to pay fee.
On ghash.io, i'm instantly paid with no fee.
This explain why everybody [who cannot see a forest behind the trees] mine on ghash.io !
enjoy $650 to $560 trip for your BTC, courtesy of ghash controversy...
Received S2 Kit after 5 days place order- nice...
all in good condition and easy assemble
up and running at 1.08TH/s-
another unit on the way.
good job BITMAIN!!
only hope future can remarks as "Computer Gateway" as previous order instead of "Bitcoin Mining Accessories" for tax exemption.
all in good condition and easy assemble
up and running at 1.08TH/s-
another unit on the way.
good job BITMAIN!!
only hope future can remarks as "Computer Gateway" as previous order instead of "Bitcoin Mining Accessories" for tax exemption.
Can you post some pics futur?
I got a person message from BITMAIN today. But I think it was a scam. As the person had ZERO activity.
Want to sell me a S2 miner at a discount......
Beware!!!!
Jerry
I'll bet it was B1TMAIN again...Want to sell me a S2 miner at a discount......
Beware!!!!
Jerry
me to received the same. but not BITMAIN but BITMAIN ' . with mark " ' " at end of the name. zero activity.
I got a person message from BITMAIN today. But I think it was a scam. As the person had ZERO activity.
Want to sell me a S2 miner at a discount......
Beware!!!!
Jerry
I'll bet it was B1TMAIN again... Want to sell me a S2 miner at a discount......
Beware!!!!
Jerry
Anyone got an S2 coupon? pm me.
kbiteroner - thanks
Coupon sent
Do you have one more coupon?
Yes one Coupon.
I'll tip you for one!!!
kbiteroner - thanks
Coupon sent
Do you have one more coupon?
Yes one Coupon.
Jump to: