All my S1 coupons and most of my S2 coupons expired mid-day yesterday. And I expect my remaining 2 S2 coupons to expire "anytime now".
Topic: ANTMINER S2 Discussion and Support Thread - page 74. (Read 355820 times)
The coupons seem to expire Shenzen time.
All my S1 coupons and most of my S2 coupons expired mid-day yesterday. And I expect my remaining 2 S2 coupons to expire "anytime now".
All my S1 coupons and most of my S2 coupons expired mid-day yesterday. And I expect my remaining 2 S2 coupons to expire "anytime now".
S2 received yesterday after ordering it on Friday evening. The boards inside were all jiggled loose during shipment and the case itself was a little bent but everything works fine. I wonder if Bitmain could consider shipping the boards secured together seperate from the case itself so there is less chance of damage from the boards clashing around in the case.
Everything works though after plugging them back in.
Everything works though after plugging them back in.
I have ten (10) S2 coupons to give away, all of which expire tomorrow May 30. PM me your bitmain ID and let me if you want one or more of them.
I am looking for S1 coupons (4 would be great). Does anyone still have any and willing to part with?
I am looking for S1 coupons (4 would be great). Does anyone still have any and willing to part with?
I dont think anyone has any s1 coupon that doesnt expire 29/5
I have ten (10) S2 coupons to give away, all of which expire tomorrow May 30. PM me your bitmain ID and let me if you want one or more of them.
I am looking for S1 coupons (4 would be great). Does anyone still have any and willing to part with?
I am looking for S1 coupons (4 would be great). Does anyone still have any and willing to part with?
Question @BITMAIN Any more info on the upgrades you will be offering? Technical details? possible Pricing? It would be nice to know what is coming. Thanks
i found they want to failover to the 3rd pool at times - after removing the 3rd pool i have considerably less ppc income...
this is strange, I have not seen this. In fact, my second pool earned just 0.00009 BTC in several months on multiple miners, which also means that third would have earned essentially nothing.
bitmain DON'T do REFUND.
You are warned!
You are warned!
i found they want to failover to the 3rd pool at times - after removing the 3rd pool i have considerably less ppc income...
yeah on the s-1's if you do 2 not three and the second one fails there is a longer delay as it goes to line 3 finds nothing then goes back up to line 1.
you can lose 5-10 minutes of mining each time that happens.
https://github.com/kanoi/cgminer-binaries/tree/master/AntS1
P.S. it doesn't do what you described in any version.
The list of pools is passed to cgminer at startup.
i found they want to failover to the 3rd pool at times - after removing the 3rd pool i have considerably less ppc income...
yeah on the s-1's if you do 2 not three and the second one fails there is a longer delay as it goes to line 3 finds nothing then goes back up to line 1.
you can lose 5-10 minutes of mining each time that happens.
i found they want to failover to the 3rd pool at times - after removing the 3rd pool i have considerably less ppc income...
I've got an S2 with only 9 slots working. I know that it is the slot and not the board because i switched the boards around to no positive effect.
Anybody had the same?
Is this somehow fixable or a lost cause and I will have to endure a 90% miner. I will ask bitmain for some compensation. Was anything ever given in cases like this?
Where is LOGOUT on the web gui? I don't see it. It is too minimized in comparison with S1, in my opinion.
Anybody had the same?
Is this somehow fixable or a lost cause and I will have to endure a 90% miner. I will ask bitmain for some compensation. Was anything ever given in cases like this?
Where is LOGOUT on the web gui? I don't see it. It is too minimized in comparison with S1, in my opinion.
try putting one of your pools on line 3.. you only have two pools. copy line one and have it on 1 and 3.
did you always try to run all 10 cards or did you try slot 1 and slot 2 only? just run 2 cards to see if slot 1 works.
your psu may be only able to run 9 cards and slot one is the one that gets the least power.
Thanks. interesting..., no, did not try to run just two cards-will try. re pools, i usually don't bother with a third pool. it never affected anything in a good way, but I certainly got some trouble when I specified btcguild as third at one point.
I've got an S2 with only 9 slots working. I know that it is the slot and not the board because i switched the boards around to no positive effect.
Anybody had the same?
Is this somehow fixable or a lost cause and I will have to endure a 90% miner. I will ask bitmain for some compensation. Was anything ever given in cases like this?
Where is LOGOUT on the web gui? I don't see it. It is too minimized in comparison with S1, in my opinion.
Anybody had the same?
Is this somehow fixable or a lost cause and I will have to endure a 90% miner. I will ask bitmain for some compensation. Was anything ever given in cases like this?
Where is LOGOUT on the web gui? I don't see it. It is too minimized in comparison with S1, in my opinion.
try putting one of your pools on line 3.. you only have two pools. copy line one and have it on 1 and 3.
did you always try to run all 10 cards or did you try slot 1 and slot 2 only? just run 2 cards to see if slot 1 works.
your psu may be only able to run 9 cards and slot one is the one that gets the least power.
I've got an S2 with only 9 slots working. I know that it is the slot and not the board because i switched the boards around to no positive effect.
Anybody had the same?
Is this somehow fixable or a lost cause and I will have to endure a 90% miner. I will ask bitmain for some compensation. Was anything ever given in cases like this?
Where is LOGOUT on the web gui? I don't see it. It is too minimized in comparison with S1, in my opinion.
Anybody had the same?
Is this somehow fixable or a lost cause and I will have to endure a 90% miner. I will ask bitmain for some compensation. Was anything ever given in cases like this?
Where is LOGOUT on the web gui? I don't see it. It is too minimized in comparison with S1, in my opinion.
I have over 20 S2 coupons that are about to expire on 5-30. Send me a PM with your bitmain userid, let me know how many you need, and they are yours for free.
Had an S2 shipped on the 22nd, now it's sitting in customs in California. UPS can't give me an estimate as to when it will be released. Any US buyers run into this? How long did your package take to clear?
Thanks,
Dave
All my S1s and the S2 I've just ordered have always been released immediately.Thanks,
Dave
Code:
Anchorage, AK, United States 05/28/2014 9:41 A.M. Departure Scan
05/28/2014 6:29 A.M. Destination Scan
05/28/2014 6:23 A.M. Arrival Scan
[b]Ontario, CA,[/b] United States 05/28/2014 2:26 A.M. Departure Scan
Ontario, CA, United States 05/27/2014 11:39 P.M. Import Scan
05/27/2014 10:45 P.M. Arrival Scan
Anchorage, AK, United States 05/27/2014 4:53 P.M. Departure Scan
05/27/2014 3:05 P.M. Arrival Scan
05/27/2014 10:26 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / Your package was released by the clearing agency.
Chek Lap Kok, Hong Kong 05/27/2014 9:19 P.M. Departure Scan
05/27/2014 5:46 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / The package is at the clearing agency awaiting final release.
Shenzhen, China 05/27/2014 10:30 A.M. Departure Scan
05/27/2014 1:38 A.M. Arrival Scan
05/27/2014 1:28 A.M. Departure Scan
Shenzhen, China 05/26/2014 10:49 P.M. Origin Scan
05/26/2014 8:36 P.M. Pickup Scan
China 05/26/2014 4:47 A.M. Order Processed: Ready for UPS
05/28/2014 6:29 A.M. Destination Scan
05/28/2014 6:23 A.M. Arrival Scan
[b]Ontario, CA,[/b] United States 05/28/2014 2:26 A.M. Departure Scan
Ontario, CA, United States 05/27/2014 11:39 P.M. Import Scan
05/27/2014 10:45 P.M. Arrival Scan
Anchorage, AK, United States 05/27/2014 4:53 P.M. Departure Scan
05/27/2014 3:05 P.M. Arrival Scan
05/27/2014 10:26 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / Your package was released by the clearing agency.
Chek Lap Kok, Hong Kong 05/27/2014 9:19 P.M. Departure Scan
05/27/2014 5:46 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / The package is at the clearing agency awaiting final release.
Shenzhen, China 05/27/2014 10:30 A.M. Departure Scan
05/27/2014 1:38 A.M. Arrival Scan
05/27/2014 1:28 A.M. Departure Scan
Shenzhen, China 05/26/2014 10:49 P.M. Origin Scan
05/26/2014 8:36 P.M. Pickup Scan
China 05/26/2014 4:47 A.M. Order Processed: Ready for UPS
I had relatives that lived off of Euclid, just below Holt Blvd in Ontario.
Had an S2 shipped on the 22nd, now it's sitting in customs in California. UPS can't give me an estimate as to when it will be released. Any US buyers run into this? How long did your package take to clear?
Thanks,
Dave
All my S1s and the S2 I've just ordered have always been released immediately.Thanks,
Dave
Code:
Anchorage, AK, United States 05/28/2014 9:41 A.M. Departure Scan
05/28/2014 6:29 A.M. Destination Scan
05/28/2014 6:23 A.M. Arrival Scan
Ontario, CA, United States 05/28/2014 2:26 A.M. Departure Scan
Ontario, CA, United States 05/27/2014 11:39 P.M. Import Scan
05/27/2014 10:45 P.M. Arrival Scan
Anchorage, AK, United States 05/27/2014 4:53 P.M. Departure Scan
05/27/2014 3:05 P.M. Arrival Scan
05/27/2014 10:26 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / Your package was released by the clearing agency.
Chek Lap Kok, Hong Kong 05/27/2014 9:19 P.M. Departure Scan
05/27/2014 5:46 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / The package is at the clearing agency awaiting final release.
Shenzhen, China 05/27/2014 10:30 A.M. Departure Scan
05/27/2014 1:38 A.M. Arrival Scan
05/27/2014 1:28 A.M. Departure Scan
Shenzhen, China 05/26/2014 10:49 P.M. Origin Scan
05/26/2014 8:36 P.M. Pickup Scan
China 05/26/2014 4:47 A.M. Order Processed: Ready for UPS
05/28/2014 6:29 A.M. Destination Scan
05/28/2014 6:23 A.M. Arrival Scan
Ontario, CA, United States 05/28/2014 2:26 A.M. Departure Scan
Ontario, CA, United States 05/27/2014 11:39 P.M. Import Scan
05/27/2014 10:45 P.M. Arrival Scan
Anchorage, AK, United States 05/27/2014 4:53 P.M. Departure Scan
05/27/2014 3:05 P.M. Arrival Scan
05/27/2014 10:26 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / Your package was released by the clearing agency.
Chek Lap Kok, Hong Kong 05/27/2014 9:19 P.M. Departure Scan
05/27/2014 5:46 A.M. Registered with Clearing Agency. Shipment release pending Clearing Agency review. / The package is at the clearing agency awaiting final release.
Shenzhen, China 05/27/2014 10:30 A.M. Departure Scan
05/27/2014 1:38 A.M. Arrival Scan
05/27/2014 1:28 A.M. Departure Scan
Shenzhen, China 05/26/2014 10:49 P.M. Origin Scan
05/26/2014 8:36 P.M. Pickup Scan
China 05/26/2014 4:47 A.M. Order Processed: Ready for UPS
Had an S2 shipped on the 22nd, now it's sitting in customs in California. UPS can't give me an estimate as to when it will be released. Any US buyers run into this? How long did your package take to clear?
Thanks,
Dave
Thanks,
Dave
this seems to be an ongoing issue with regards any mining equipment, i'm reading it all over the forum
Had an S2 shipped on the 22nd, now it's sitting in customs in California. UPS can't give me an estimate as to when it will be released. Any US buyers run into this? How long did your package take to clear?
Thanks,
Dave
Thanks,
Dave
No change. The Kernel is treating it as a 64 chip board (which is why I posted the dmesg output). I'm running with 0881 as the flags (225mhz) and it's hashing nicely at about 1100gh.
A question: out of 3 tar files on bitmain site, do you need only the last (from 20140410) to put on backup SD or all three of them. Instructions are unclear to me.
Do I just put the tar file directly there or decompress it first?
What is the use of SD partition tool? Much obliged for any help.
Do I just put the tar file directly there or decompress it first?
What is the use of SD partition tool? Much obliged for any help.
Jump to: