ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 187.

not.you

legendary

Activity: 1726

Merit: 1018

Quote from: valkir on November 25, 2015, 08:51:51 PM

Quote from: AriesIV10 on November 25, 2015, 08:49:09 PM

Here is a pic of all of my miners shown (11) right now. I had 3 overheat when the internet went out and I have shipped them back to Bitmain. I am waiting for their return. Electric is about 25% of my total cost per month. That comes out to be about $3700 per month with a ....

Bitmain didnt fix the internet problem yet ?? Did smith already have done a upgrade of the firmware to fix this ??

Wasn't it determined that putting the fans on a manual speed would alleviate this issue?

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: citronick on November 25, 2015, 09:22:33 PM

wow... 11 x S7s.... its a long way still for me to reach that level.
With that many S7... I think it's better to put it in proper home like a full fledge DC.
How much does a DC charges in your country?

imagine the humm/buzz coming from that basement.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

wow... 11 x S7s.... its a long way still for me to reach that level.
With that many S7... I think it's better to put it in proper home like a full fledge DC.
How much does a DC charges in your country?

valkir

legendary

Activity: 1484

Merit: 1004

Quote from: AriesIV10 on November 25, 2015, 08:49:09 PM

Here is a pic of all of my miners shown (11) right now. I had 3 overheat when the internet went out and I have shipped them back to Bitmain. I am waiting for their return. Electric is about 25% of my total cost per month. That comes out to be about $3700 per month with a ....

Bitmain didnt fix the internet problem yet ?? Did smith already have done a upgrade of the firmware to fix this ??

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Here is a pic of all of my miners shown (11) right now. I had 3 overheat when the internet went out and I have shipped them back to Bitmain. I am waiting for their return. Electric is about 25% of my total cost per month. That comes out to be about $3700 per month with a $1000 electric bill.
I had 26 S5's before and sold them all to get the S7's at the end of September.
I have maxed out my electric power and will be installing 20 S7's (11 in the pic and 7 more on order) in a data center in mid December. I will show pictures when I get them set up in a 42U Cabinet.

Here they are in my basement:

Here is a pic of the back side:

Let me know if you have any questions.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: citronick on November 25, 2015, 08:07:48 PM

Hi Guys,

I have just installed my 3rd S7 with 1 more on the way (Batch Cool

.

S7 #1, v1.7 / 4.66
S7 #2, v1.7 / 4.66
S7 #3, v2.0 / 4.46
S7 #4, Batch 8

What batches are the first 3?

All at clocked at 600mhz, and all them at frequently touching 5TH with 50% fan settings 3600-3720 RPM steady at 57c-61c temp.
The HW errors are also very low at 0.01%

I am really pleased with my vertical design, because now I can house them in soundproof cage and improve the heat exhaust greatly.
Thanks to all the expert advise from this thread and others. Let me know if I can further improve my rig.

Note: I will post some pix as soon as I figure out how to do it ...:-)

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Hi Guys,

I have just installed my 3rd S7 with 1 more on the way (Batch Cool

.

S7 #1, v1.7 / 4.66
S7 #2, v1.7 / 4.66
S7 #3, v2.0 / 4.46
S7 #4, Batch 8

What batches are the first 3?

All at clocked at 600mhz, and all them at frequently touching 5TH with 50% fan settings 3600-3720 RPM steady at 57c-61c temp.
The HW errors are also very low at 0.01%

I am really pleased with my vertical design, because now I can house them in soundproof cage and improve the heat exhaust greatly.
Thanks to all the expert advise from this thread and others. Let me know if I can further improve my rig.

Note: I will post some pix as soon as I figure out how to do it ...:-)

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: supertee on November 25, 2015, 04:36:39 PM

I don't care, just don't want to buy the 700M machine, so I am waiting for Batch 8...

Just think about it:

Batch 8 uses 1293 W to get 4.73 TH/s = Actual Efficiency: 0.2734 J/GH
Batch 7 uses 1278 W to get 5.06 TH/s = Actual Efficiency: 0.2573 J/GH
Batch 6 uses 1042 W to get 4.05 TH/s = Actual Efficiency: 0.2572 J/GH
Batch 5 uses 1210 W to get 4.86 TH/s = Actual Efficiency: 0.2490 J/GH
Batch 4 uses 1160 W to get 4.66 TH/s = Actual Efficiency: 0.2489 J/GH
Batch 3 uses 1210 W to get 4.86 TH/s = Actual Efficiency: 0.2490 J/GH
Batch 2 uses 1160 W to get 4.66 TH/s = Actual Efficiency: 0.2489 J/GH
Batch 1 uses 1210 W to get 4.86 TH/s = Actual Efficiency: 0.2490 J/GH

It is all about efficiency 24 hours a day!

Looks to me that the Efficiency is going down.

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

Quote from: supertee on November 25, 2015, 04:36:39 PM

I don't care, just don't want to buy the 700M machine, so I am waiting for Batch 8...

well if everybody waits there wont be a batch 9 lol. I got a batch 8, i'll be honest. i'd have gotten a batch 7, but i was a few coins short. any case, I dont get the hate over the batch 8...there is a lot more to it than just a higher clock rate
edit: I would prefer a 7, but after my purchase i had 0.025btc left Tongue

im not rich like you guys

Cyper_BLC

sr. member

Activity: 490

Merit: 270

Reverse Engineer

Quote from: dmwardjr on November 25, 2015, 06:13:59 PM

Quote from: philipma1957 on November 25, 2015, 05:49:11 PM

after a hour of looking at what could be wrong I may have found the problem. may be my error.

my psu's volts dropped from 12.01 to 11.80 and I know that is an issue. Iplayed with psu and it is now doing 12.01 volts.

I think the psu did not get enough space for cooling off and dropped it volts a bit. I will need to keep a closer eye on it for a day or two.

so my good one does 4890gh with .0001 errors

and this troubled one is now back to 4730 at freq 581 with 0.0111 errors

they owe me on time with the good one as it was a few days late. but it runs so well I am more forgiving.

Happy to hear that. It sounded rather unusual

yepp

he passed out near the hell, dont down to 11,5 at 600 mhz

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

Quote from: philipma1957 on November 25, 2015, 05:49:11 PM

after a hour of looking at what could be wrong I may have found the problem. may be my error.

my psu's volts dropped from 12.01 to 11.80 and I know that is an issue. Iplayed with psu and it is now doing 12.01 volts.

I think the psu did not get enough space for cooling off and dropped it volts a bit. I will need to keep a closer eye on it for a day or two.

so my good one does 4890gh with .0001 errors

and this troubled one is now back to 4730 at freq 581 with 0.0111 errors

they owe me on time with the good one as it was a few days late. but it runs so well I am more forgiving.

Happy to hear that. It sounded rather unusual

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: dmwardjr on November 25, 2015, 05:15:47 PM

Quote from: philipma1957 on November 25, 2015, 05:09:31 PM

Has anyone received any compensation for any s-7 any batch if it under hashes or if it was late.

My batch 1 came on time as I was a very early order. But it now has become a slow machine .

I don't get 4860 gh as promised .

I never over clocked it. I use an evga 1600 p2 psu. it is providing 11.94 volts to all 10 pcie jacks.

It used to do 4800 then 4700 then 4600 now it is down to 4500. Maybe more like 4400.

So this piece of gear is becoming very disappointing.

my other one is very good So I have a dog and a good one.

That rig sounds like an RMA. It's still under warranty.

EDIT: No, I have not received compensation for my shipment that was 4 days late for 9 x S7's.

after a hour of looking at what could be wrong I may have found the problem. may be my error.

my psu's volts dropped from 12.01 to 11.80 and I know that is an issue. Iplayed with psu and it is now doing 12.01 volts.

I think the psu did not get enough space for cooling off and dropped it volts a bit. I will need to keep a closer eye on it for a day or two.

so my good one does 4890gh with .0001 errors

and this troubled one is now back to 4730 at freq 581 with 0.0111 errors

they owe me on time with the good one as it was a few days late. but it runs so well I am more forgiving.

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

Quote from: philipma1957 on November 25, 2015, 05:09:31 PM

Has anyone received any compensation for any s-7 any batch if it under hashes or if it was late.

My batch 1 came on time as I was a very early order. But it now has become a slow machine .

I don't get 4860 gh as promised .

I never over clocked it. I use an evga 1600 p2 psu. it is providing 11.94 volts to all 10 pcie jacks.

It used to do 4800 then 4700 then 4600 now it is down to 4500. Maybe more like 4400.

So this piece of gear is becoming very disappointing.

my other one is very good So I have a dog and a good one.

That rig sounds like an RMA. It's still under warranty.

EDIT: No, I have not received compensation for my shipment that was 4 days late for 9 x S7's.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Has anyone received any compensation for any s-7 any batch if it under hashes or if it was late.

My batch 1 came on time as I was a very early order. But it now has become a slow machine .

I don't get 4860 gh as promised .

I never over clocked it. I use an evga 1600 p2 psu. it is providing 11.94 volts to all 10 pcie jacks.

It used to do 4800 then 4700 then 4600 now it is down to 4500. Maybe more like 4400.

So this piece of gear is becoming very disappointing.

my other one is very good So I have a dog and a good one.

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

Quote from: pj40 on November 25, 2015, 04:37:17 PM

Quote from: RichBC on November 25, 2015, 04:33:03 PM

Yes I am sure there will be one. The interesting "game" is guessing what it will be? Will it be a chip count / speed that we have seen already or something new?

Following the recent trend I think we are due for another 162 Chip Miner perhaps the same as Batch 7 with 5063GH/s? Although pending further information on exactly what the changes are and some feedback from people taking delivery I am liking the look of further releases of a Batch 8 style with 135 chips & 4725GH/s.

Rich

I'm hoping for something along the line of batch 3 at least...less wattage and more efficient than this last one.

My opinion is when the new rig put up for sale has less hash rate while consuming more watts it should be priced lower. At present, the rigs are priced at .001 BTC per GH/s. When the rigs are lower hash rate and less power efficient, they should be priced at 0.0009 BTC to 0.00095 BTC per GH/s.

4,730 GH/s x 0.00095 BTC = 4.4935 BTC + shipping
4,730 GH/s x 0.00090 BTC = 4.257 BTC + shipping

yslyung

legendary

Activity: 1500

Merit: 1002

Mine Mine Mine

i'd say S7 "+" would be coming soon
162 chips version (using the better chips production batch) x 2
single controller
10.5 th/s, roughly abt 11 th/s +/-5%
power has to be 12V +5% & up
price won't be cheap, 11 BTC ?
it's a pre-order !

just my guess . . .

opentoe

legendary

Activity: 1274

Merit: 1000

Personal text my ass....

Quote from: ryanjf on November 25, 2015, 12:47:02 PM

Quote from: mikefallen on November 25, 2015, 10:22:07 AM

batch 6 shipped last night - supposed to arrive friday but my batch 5 are still stuck in customs Sad

My batch 5 was stuck in customs as well because Bitmain overstated the value at over $7000 per miner. I just had to call FedEx and email them a screen shot of my order and state that the value was overstated due to human error. They'll also want to know what the miner does. This explanation got it released right away,"This particular item is a collection of computer processors called ASICs that perform a specific computational task. Alone, this component does nothing. Once I assemble other pieces and attach the ASICs it solves complex computer math problems. In the most simplest of terms, it is just a computer component."

Hope this helps.

Years ago when FedEx asked me what the shipment was, I told them they were complex calculators. Released immediately.

pj40

full member

Activity: 180

Merit: 100

Quote from: RichBC on November 25, 2015, 04:33:03 PM

Quote from: dmwardjr on November 25, 2015, 04:13:34 PM

Quote from: ?? on ??

Quote from: thesmokingman on November 25, 2015, 01:01:40 PM

Hopefully batch 7 isn't to far behind since batch 6 and 7 have the same approx ship dates.

Does anyone know if they are going to make a batch 9?

I'm pretty sure they will. We may see a Batch 9 once Batch 8 is close to completely sold.

Yes I am sure there will be one. The interesting "game" is guessing what it will be? Will it be a chip count / speed that we have seen already or something new?

Following the recent trend I think we are due for another 162 Chip Miner perhaps the same as Batch 7 with 5063GH/s? Although pending further information on exactly what the changes are and some feedback from people taking delivery I am liking the look of further releases of a Batch 8 style with 135 chips & 4725GH/s.

Rich

I'm hoping for something along the line of batch 3 at least...less wattage and more efficient than this last one.

supertee

sr. member

Activity: 689

Merit: 260

I don't care, just don't want to buy the 700M machine, so I am waiting for Batch 8...

RichBC

hero member

Activity: 588

Merit: 500

Quote from: dmwardjr on November 25, 2015, 04:13:34 PM

Quote from: ?? on ??

Quote from: thesmokingman on November 25, 2015, 01:01:40 PM

Hopefully batch 7 isn't to far behind since batch 6 and 7 have the same approx ship dates.

Does anyone know if they are going to make a batch 9?

I'm pretty sure they will. We may see a Batch 9 once Batch 8 is close to completely sold.

Yes I am sure there will be one. The interesting "game" is guessing what it will be? Will it be a chip count / speed that we have seen already or something new?

Following the recent trend I think we are due for another 162 Chip Miner perhaps the same as Batch 7 with 5063GH/s? Although pending further information on exactly what the changes are and some feedback from people taking delivery I am liking the look of further releases of a Batch 8 style with 135 chips & 4725GH/s.

Rich

Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 187. (Read 528055 times)