their batch 8 has been running for weeks already, I wonder if it's because they are selling A TON of batch 8 or it's because it's selling very slowly
I'm saying this because Batch 7 was sold out in just a few hours
Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 184. (Read 528055 times)
November 28, 2015, 11:24:17 AM
November 28, 2015, 04:24:22 AM
Anyone getting:
Unknown error: null
When trying to order the 1600 watt Power Supply?
It's been this way for weeks.
Unknown error: null
When trying to order the 1600 watt Power Supply?
It's been this way for weeks.
I belive you have to pay with BTC not USD
I'm using the bitcoin payment option, but it gives this error.
I do see it listed in their shopping area as:
140 USD
( 0.397 BTC )
November 28, 2015, 02:09:09 AM
well I can look at the address I paid into for my s-7's
https://blockchain.info/address/1KwA4fS4uVuCNjCtMivE7m5ATbv93UZg8V
sales of s-7 started around here.
https://blockchain.info/tx/580acc51ab71100dc9fb20c2c19856c7cb397beb09e88ea46b9cff75b5a4f2a3
I did figure more then 5000 sold since 8/30/2015
thats 20ph about 25000 coins but we have added more then 100ph to the network since then.
and I did not add this up in a while so it may be more like 6000 s-7's and 28ph
https://blockchain.info/address/1KwA4fS4uVuCNjCtMivE7m5ATbv93UZg8V
sales of s-7 started around here.
https://blockchain.info/tx/580acc51ab71100dc9fb20c2c19856c7cb397beb09e88ea46b9cff75b5a4f2a3
I did figure more then 5000 sold since 8/30/2015
thats 20ph about 25000 coins but we have added more then 100ph to the network since then.
and I did not add this up in a while so it may be more like 6000 s-7's and 28ph
I'm thinking the combination of the new S7 batches and the Avalon account for a lot of the increase. I also think that it's possible with winter in the northern hemisphere people are starting to turn on extra miners that help offset heat costs but man 100ph. These high diff jumps are going to hurt ROI but at least BTC prices have gone up to help soften the blow a little. I'm hoping that things start to level off really soon.
Add Bitfury's new miners they made for themselves & KnC still adding miners (not sure if they got their 16nm out yet,don't think so) & there's the majority of the added hashrate
I'll be looking to a new coin that's not corporate run very soon
BTC is for big business,not the masses anymore............. I also believe that those guys are ignoring transactions that are feeless,wouldn't surprise me in the least...........
November 28, 2015, 12:29:12 AM
well I can look at the address I paid into for my s-7's
https://blockchain.info/address/1KwA4fS4uVuCNjCtMivE7m5ATbv93UZg8V
sales of s-7 started around here.
https://blockchain.info/tx/580acc51ab71100dc9fb20c2c19856c7cb397beb09e88ea46b9cff75b5a4f2a3
I did figure more then 5000 sold since 8/30/2015
thats 20ph about 25000 coins but we have added more then 100ph to the network since then.
and I did not add this up in a while so it may be more like 6000 s-7's and 28ph
https://blockchain.info/address/1KwA4fS4uVuCNjCtMivE7m5ATbv93UZg8V
sales of s-7 started around here.
https://blockchain.info/tx/580acc51ab71100dc9fb20c2c19856c7cb397beb09e88ea46b9cff75b5a4f2a3
I did figure more then 5000 sold since 8/30/2015
thats 20ph about 25000 coins but we have added more then 100ph to the network since then.
and I did not add this up in a while so it may be more like 6000 s-7's and 28ph
I'm thinking the combination of the new S7 batches and the Avalon account for a lot of the increase. I also think that it's possible with winter in the northern hemisphere people are starting to turn on extra miners that help offset heat costs but man 100ph. These high diff jumps are going to hurt ROI but at least BTC prices have gone up to help soften the blow a little. I'm hoping that things start to level off really soon.
November 27, 2015, 10:53:27 PM
How come we aren't seeing listings on bitmain's website for used S5's? I would have expected they would be switching over their own farm to S7's and have a bunch of S5's to get rid of.
Because Bitmain sold all their S5's as new to users. The one my Dad has, that's not working anymore looked like it was mining for 3 years. Dust all over it. The fan barely started properly and there were burn marks on the PCB board. Setup an RMA indicating we wanted new hardware. Shipped the used one to them, and they sent another used one. Gave up. NOW it goes bad. At that critical time where you want all the GH you can get.
November 27, 2015, 03:13:47 PM
Hi, I have Batch 7 Shipped, but Batch 6 not Shipped...
does anyone have same problem?
does anyone have same problem?
I got a batch 7 and it says it shipped today but did not have a batch 6 order so I can't comment on your issue.
Its exciting though since I wasn't expecting it till mid to late december.
November 27, 2015, 01:51:11 PM
Hi, I have Batch 7 Shipped, but Batch 6 not Shipped...
does anyone have same problem?
does anyone have same problem?
November 27, 2015, 01:21:02 PM
but it's running at .5% hw errors.
Did you typo that? I have never seen HW that high on any of my OC'd ants from any generation. Usually if I see .01 or .02 I consider it about the max for that particular machine. If I see higher than that I lower the freq.
nope, not a typo, it was 0.5% - but I did unplug it to move cables around before reading that, which cut off power suddenly and stopped airflow. I soft-cycled it from the admin page just now, and am now getting .008 after 5 minutes, so perhaps it was an artifact of the heat spike from being unplugged suddenly without the fans staying on
soft boot helps I did a thread on it. One of my s-7's desires a soft boot 2 or 3 times a week.
November 27, 2015, 01:16:27 PM
but it's running at .5% hw errors.
Did you typo that? I have never seen HW that high on any of my OC'd ants from any generation. Usually if I see .01 or .02 I consider it about the max for that particular machine. If I see higher than that I lower the freq.
nope, not a typo, it was 0.5% - but I did unplug it to move cables around before reading that, which cut off power suddenly and stopped airflow. I soft-cycled it from the admin page just now, and am now getting .008 after 5 minutes, so perhaps it was an artifact of the heat spike from being unplugged suddenly without the fans staying on
November 27, 2015, 01:09:12 PM
my batch 6 order arrived about 2 hours ago. September 15 firmware, hashing right at the average advertised speed of 4.05 th/s at default frequency of 600 mHz, but my killawatt died last week so I'm not sure on the draw. They aren't flipping 15-amp breakers, though, even though the included instruction sheets say they draw 16 amps each. We'll see if that holds up over time. Turned one up (modestly) to 625 mHz, still didn't trip the breaker, but it's running at .5% hw errors. Not sure if I want to switch firmware since I don't have a copy of the version that it shipped with to fall back on if something goes sideways...anyone else feeling brave?
Very interested to hear how Batch 6 goes, as it's the first of the 135 Chip Systems? If they have a Buck Converter they should be very tolerant of the supply voltage. If anyone has an excuse to take a look inside it would be nice to have a picture of the Hash Board on the other side from the large inductor shown on the Batch 8 Sales page. Also power at the wall at the default and any other frequencies would be very interesting?
Quote
Not sure if I want to switch firmware since I don't have a copy of the version that it shipped with to fall back on if something goes sideways...anyone else feeling brave?
I don't think there is alternative firmware available for Batch 6 / 600MHz systems yet?
Rich
November 27, 2015, 01:06:35 PM
but it's running at .5% hw errors.
Did you typo that? I have never seen HW that high on any of my OC'd ants from any generation. Usually if I see .01 or .02 I consider it about the max for that particular machine. If I see higher than that I lower the freq.
November 27, 2015, 12:57:39 PM
my batch 6 order arrived about 2 hours ago. September 15 firmware, hashing right at the average advertised speed of 4.05 th/s at default frequency of 600 mHz, but my killawatt died last week so I'm not sure on the draw. They aren't flipping 15-amp breakers, though, even though the included instruction sheets say they draw 16 amps each. We'll see if that holds up over time. Turned one up (modestly) to 625 mHz, still didn't trip the breaker, but it's running at .5% hw errors. Not sure if I want to switch firmware since I don't have a copy of the version that it shipped with to fall back on if something goes sideways...anyone else feeling brave?
November 27, 2015, 12:14:00 PM
my b7 is still unshipped, but it was ordered late.
November 27, 2015, 11:06:24 AM
I could be off base, but I can't imagine their retail sales even being equivalent to their own mining efforts, so I'm not convinced the shipped batches will have as much of an impact on difficulty as what's already been put on-line in their own farms. If they're anything like the other manufacturers in the direction they've taken, they will prioritize self-mining and only sell to the public for considerable mark-up to justify the "competition" in difficulty. Maybe I'm being optimistic 
well I can look at the address I paid into for my s-7'shttps://blockchain.info/address/1KwA4fS4uVuCNjCtMivE7m5ATbv93UZg8V
sales of s-7 started around here.
https://blockchain.info/tx/580acc51ab71100dc9fb20c2c19856c7cb397beb09e88ea46b9cff75b5a4f2a3
I did figure more then 5000 sold since 8/30/2015
thats 20ph about 25000 coins but we have added more then 100ph to the network since then.
and I did not add this up in a while so it may be more like 6000 s-7's and 28ph
November 27, 2015, 10:37:34 AM
I could be off base, but I can't imagine their retail sales even being equivalent to their own mining efforts, so I'm not convinced the shipped batches will have as much of an impact on difficulty as what's already been put on-line in their own farms. If they're anything like the other manufacturers in the direction they've taken, they will prioritize self-mining and only sell to the public for considerable mark-up to justify the "competition" in difficulty. Maybe I'm being optimistic
November 27, 2015, 10:32:45 AM
Yeah, I think the reason we are seeing almost no S5s for sale anywhere is expansion. Anybody who has some S5 units and bought S7 units kept their S5s and simply added to their farm. This is the biggest reason for the massive diff jumps in my opinion.
We are in for a few more 10%-15% jumps with the next batches shipping right now. We should have seen this coming, prepare for the worst. I think we'll have a price drop soon followed by another few massive diff jumps. It sucks but I don't see it not happening...
We are in for a few more 10%-15% jumps with the next batches shipping right now. We should have seen this coming, prepare for the worst. I think we'll have a price drop soon followed by another few massive diff jumps. It sucks but I don't see it not happening...
November 27, 2015, 10:23:49 AM
Expansion maybe? The s5's are still profitable. Or it's possible they have had S7's going for considerably longer while they were still selling "tested" S5's from Batch5
November 27, 2015, 10:10:02 AM
How come we aren't seeing listings on bitmain's website for used S5's? I would have expected they would be switching over their own farm to S7's and have a bunch of S5's to get rid of.
November 27, 2015, 09:44:13 AM
Batch 7 showing shipped. Will be here Monday. Everything is just waiting for the shipment.
November 27, 2015, 09:36:00 AM
Diff will cross 82 bill in 10 days.
I am a bit skeptical of this (and frankly hopeful that you are wrong). I am hoping that last 10% increase doesn't mean a return to regular 10% (or larger) increases like we had in most of the first half of 2014.
I feel like with the increase in BTC price the price of the S7 is too high. I mean it was probably too high before but now it's like clearly more than I would pay. I want one more of these and I want it soon so it has time to work before the halving but at this price I just won't do it.
I feel that it will have to slow diff jumps barring more price increases.
Now we that we have had a price jump in coin of 5% this diff period over the last few days , getting to a diff of 82 bill (10% jump) becomes more possible.
Jump to: