Pages:
Author

Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 5. (Read 528110 times)

hero member
Activity: 773
Merit: 528
Any way to tweak a S7-LN and change web interface/ssh port for remotely controlling it?
Done it for Spondoolies, hope it can be done for Bitmain miners
hero member
Activity: 741
Merit: 514
https://www.bitmain.com
Hello guys, i'm having trouble with a miner i got on my last order (still under bitmain warranty), the miner starts up and i get the blinking green light,but one of the hashboards seems to be having trouble starting up hashing, and the whole miner doesn't hash at all until that board starts up,

miner starts and shows 0 hashing in the miner status, and it gives 100% HW errors....it takes about 5-8 minutes and then the miner starts hashing at full speed, i tested each board separatelly and the problem seems to be related with 1 single board, if i disconnect it miner starts mining right away.

anybody familiar with this problem? is this board defective even if it starts hashing after 5-8 minutes? im still in bitmain warranty

Hello zodiacus,

Please contact us via support.bitmain.com and one of our customer support reps will get back to you within 2 working days.

Thanks for choosing Bitmain,

the Bitmain team 


legendary
Activity: 1456
Merit: 1000
On my S4, it was responding to the web panel but not hashing.
Tried firmware reset, no good.
Did total reset but then only ssh worked.
What can I do via ssh

This is S7 thread so kinda out of place here.  Been a while since I have had a S4 but they had sd cards that you could backup/re-image very easily.   Have you looked into it?   That would kinda eliminate the software aspect.   

After that I would open up as they can get dusty and clean it out.  At that point check cables and boards - https://bitmain.zendesk.com/hc/en-us/articles/203361315-Board-Diagnostics .   I would start with those two.
hero member
Activity: 979
Merit: 510
On my S4, it was responding to the web panel but not hashing.
Tried firmware reset, no good.
Did total reset but then only ssh worked.
What can I do via ssh
legendary
Activity: 2506
Merit: 1714
Electrical engineer. Mining since 2014.
I want to buy a S7-LN, anyone got coupon for it?
There are no coupons for Antminer S7-LN.
hero member
Activity: 773
Merit: 528
I want to buy a S7-LN, anyone got coupon for it?
legendary
Activity: 1694
Merit: 1002
Go Big or Go Home.....
Hello guys, i'm having trouble with a miner i got on my last order (still under bitmain warranty), the miner starts up and i get the blinking green light,but one of the hashboards seems to be having trouble starting up hashing, and the whole miner doesn't hash at all until that board starts up,

miner starts and shows 0 hashing in the miner status, and it gives 100% HW errors....it takes about 5-8 minutes and then the miner starts hashing at full speed, i tested each board separatelly and the problem seems to be related with 1 single board, if i disconnect it miner starts mining right away.

anybody familiar with this problem? is this board defective even if it starts hashing after 5-8 minutes? im still in bitmain warranty

Yous can ask them a replacement board. Just hit them up on their mail.

Good luck.. Lol
legendary
Activity: 1736
Merit: 1006
any feedback on the latest s7 firmware dated may 23? this one is ONLY available for the 700 mhz s7 machines.....

https://bitmaintech.com/files/download/S7-20160523-700M-2fan-4320.tar.gz

https://bitmaintech.com/files/download/S7-20160523-700M-1fan-6000.tar.gz

-Zodiacus


its working in a s7 b8 version Cheesy
so far no problem!!!!

So, What is the upgrade/improvement over any previous version?

I tested it on a couple. Can't tell a difference.

i just flashed mine to the newest fw.
it had dec 2015 on it, but every time the main pool goes down and it goes to failover it jams up when the main pool comes back up. forcing me to restart it to get it back online.
hopefully this new fw fixes that.
legendary
Activity: 3892
Merit: 4331
any feedback on the latest s7 firmware dated may 23? this one is ONLY available for the 700 mhz s7 machines.....

https://bitmaintech.com/files/download/S7-20160523-700M-2fan-4320.tar.gz

https://bitmaintech.com/files/download/S7-20160523-700M-1fan-6000.tar.gz

-Zodiacus


its working in a s7 b8 version Cheesy
so far no problem!!!!

So, What is the upgrade/improvement over any previous version?

I tested it on a couple. Can't tell a difference.

bitmain site shows wrong price in btc for S7.
At $622/btc it is is NOT 0.755 btc, but 0.707 btc.
sr. member
Activity: 546
Merit: 253
any feedback on the latest s7 firmware dated may 23? this one is ONLY available for the 700 mhz s7 machines.....

https://bitmaintech.com/files/download/S7-20160523-700M-2fan-4320.tar.gz

https://bitmaintech.com/files/download/S7-20160523-700M-1fan-6000.tar.gz

-Zodiacus


its working in a s7 b8 version Cheesy
so far no problem!!!!

So, What is the upgrade/improvement over any previous version?

I tested it on a couple. Can't tell a difference.
member
Activity: 99
Merit: 10
Hello guys, i'm having trouble with a miner i got on my last order (still under bitmain warranty), the miner starts up and i get the blinking green light,but one of the hashboards seems to be having trouble starting up hashing, and the whole miner doesn't hash at all until that board starts up,

miner starts and shows 0 hashing in the miner status, and it gives 100% HW errors....it takes about 5-8 minutes and then the miner starts hashing at full speed, i tested each board separatelly and the problem seems to be related with 1 single board, if i disconnect it miner starts mining right away.

anybody familiar with this problem? is this board defective even if it starts hashing after 5-8 minutes? im still in bitmain warranty

Yous can ask them a replacement board. Just hit them up on their mail.
newbie
Activity: 19
Merit: 5
Hello guys, i'm having trouble with a miner i got on my last order (still under bitmain warranty), the miner starts up and i get the blinking green light,but one of the hashboards seems to be having trouble starting up hashing, and the whole miner doesn't hash at all until that board starts up,

miner starts and shows 0 hashing in the miner status, and it gives 100% HW errors....it takes about 5-8 minutes and then the miner starts hashing at full speed, i tested each board separatelly and the problem seems to be related with 1 single board, if i disconnect it miner starts mining right away.

anybody familiar with this problem? is this board defective even if it starts hashing after 5-8 minutes? im still in bitmain warranty
legendary
Activity: 1260
Merit: 1006
Mine for a Bit
any feedback on the latest s7 firmware dated may 23? this one is ONLY available for the 700 mhz s7 machines.....

https://bitmaintech.com/files/download/S7-20160523-700M-2fan-4320.tar.gz

https://bitmaintech.com/files/download/S7-20160523-700M-1fan-6000.tar.gz

-Zodiacus


its working in a s7 b8 version Cheesy
so far no problem!!!!

So, What is the upgrade/improvement over any previous version?
legendary
Activity: 3486
Merit: 2287
Wheel of Whales 🐳
does bitcoin mining still profitable?
That question has everbody to calculate for him self. Electricity costs are really important...
hero member
Activity: 560
Merit: 500
does bitcoin mining still profitable?
legendary
Activity: 3486
Merit: 2287
Wheel of Whales 🐳
Where is come s9 i did not see on the site ? And how much is your power on the  pool ?

Have a look right here: https://bitcointalk.org/index.php?topic=1493601.0;topicseen
hero member
Activity: 896
Merit: 515
Where is come s9 i did not see on the site ? And how much is your power on the  pool ?
full member
Activity: 162
Merit: 100
any feedback on the latest s7 firmware dated may 23? this one is ONLY available for the 700 mhz s7 machines.....

https://bitmaintech.com/files/download/S7-20160523-700M-2fan-4320.tar.gz

https://bitmaintech.com/files/download/S7-20160523-700M-1fan-6000.tar.gz

-Zodiacus


its working in a s7 b8 version Cheesy
so far no problem!!!!
newbie
Activity: 19
Merit: 5
any feedback on the latest s7 firmware dated may 23? this one is ONLY available for the 700 mhz s7 machines.....

https://bitmaintech.com/files/download/S7-20160523-700M-2fan-4320.tar.gz

https://bitmaintech.com/files/download/S7-20160523-700M-1fan-6000.tar.gz

-Zodiacus
legendary
Activity: 1736
Merit: 1006
some reason when i lose internet, when it comes back online.. my s7 does not.. Sad
the green lights are flashing like its still mining, and the air is coming out HOT.. but nope..

unfortunately it happens pretty often.


i wish you guys would test your stuff and fix it.. its been awhile. and now these are EOL.. still no fixes..



they are faking it  Wink

On a more serious note, can you see it in a browser? does it require soft or hard reboot?
In any case, check which firmware it is on. Typically, i don't do firmware upgrades, but I had two just like this, which were on Oct firmware.
Updating to December one fixed the problem. Those which were on September firmware did not have the problem, so I let them be.

it has dec 3rd firmware..

no you cant see it in browser.. you have to hard reboot it.

Pages:
Jump to: