Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH - page 7. (Read 528055 times)
June 01, 2016, 11:50:27 AM
YOu guys did notice the new S9....
May 30, 2016, 04:33:23 PM
I just noticed there is a new s7 firmware. I also noticed there are asic datasheets. I've never noticed that before are they new? https://www.bitmaintech.com/support.htm?pid=00720141220132903742H2RLy6C40630
They have all been there since release of the Miners that use them.
Rich
That's crazy, I've never noticed.
May 30, 2016, 04:27:40 PM
I just noticed there is a new s7 firmware. I also noticed there are asic datasheets. I've never noticed that before are they new? https://www.bitmaintech.com/support.htm?pid=00720141220132903742H2RLy6C40630
They have all been there since release of the Miners that use them.
Rich
May 30, 2016, 03:52:51 PM
I just noticed there is a new s7 firmware. I also noticed there are asic datasheets. I've never noticed that before are they new? https://www.bitmaintech.com/support.htm?pid=00720141220132903742H2RLy6C40630
May 30, 2016, 12:00:37 PM
I will just add this, the S7-F1 is not really a good miner for summer, one fan is not enough. I'm upgrading them all with a second fan
May 29, 2016, 11:27:22 PM
Anyone has an alternate solution to buy the backplane to add an extra fan to the S7-F1 ? I got 4 of thoses and the shipping from bitmain is an ultimate joke. 29$us (UPS is like 60$) for 4 backplanes that cost 2.80$ US.
I would also like 4 fans. If anyone has a cheap source.
Thanks.
I've seen 2 alternative solutions:I would also like 4 fans. If anyone has a cheap source.
Thanks.
1: Fan mounting screws https://bitcointalksearch.org/topic/m.14869061
2: Zip ties https://bitcointalksearch.org/topic/m.14510082
Sanyo Denki SAN Ace 120 3.0 Amp 12 Volt 120mm PWM Fan 224 CFM
http://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O?ie=UTF8&keywords=sanyo%20san%20ace&qid=1464549874&ref_=sr_1_3&sr=8-3
Delta Tfc1212de Powerful Cooling Fan 12038 12v 3.9A 252cfm 5200rpm
http://www.ebay.com/itm/Delta-Tfc1212de-Powerful-Cooling-Fan-12038-12v-3-9A-252crm-5200rpm-/182103037065?hash=item2a662fd489:g:dE0AAOSwdrRXGmxW
thanks
May 29, 2016, 09:58:52 PM
Bitmain: Please list the new 2.7Th miner without pouer supply for purchase on your main site =)
I have a feeling theres more than just me with plenty of power supplies to power these waiting to be re-purposed from older antminers.
I have a feeling theres more than just me with plenty of power supplies to power these waiting to be re-purposed from older antminers.
Sell it on eBay it is worth about 60.
There is no,way they will sell it without the,psu
May 29, 2016, 09:49:25 PM
FOR SALE
40 Hosted Miners $22,000
Approximately 200 TH/s
I have 40 Antminer S7s for sale. They are being hosted in Washington State in the US. I am wanting someone to take control of them and start earning profits with them immediately. This will avoid shipping, installation, and purchasing component parts. 40 miners and 24 PSUs (Power Supplies). I rent 16 PSUs for $5 per month for the rest of them. I will provide 1 day of training via skype or phone and even reprogram them for you.
I pay $80/mo per miner and rent PSUS for $5/mo per miner(16). I have full control of the miners through the user interface. I am asking $550 for 40 S7 miners and 24 Bitmain PSUs. Total Cost $22,000. PM me if interested. I take Bitcoin. Haha
40 Hosted Miners $22,000
Approximately 200 TH/s
I have 40 Antminer S7s for sale. They are being hosted in Washington State in the US. I am wanting someone to take control of them and start earning profits with them immediately. This will avoid shipping, installation, and purchasing component parts. 40 miners and 24 PSUs (Power Supplies). I rent 16 PSUs for $5 per month for the rest of them. I will provide 1 day of training via skype or phone and even reprogram them for you.
I pay $80/mo per miner and rent PSUS for $5/mo per miner(16). I have full control of the miners through the user interface. I am asking $550 for 40 S7 miners and 24 Bitmain PSUs. Total Cost $22,000. PM me if interested. I take Bitcoin. Haha
I'll offer ya $22BTC.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
May 29, 2016, 06:49:35 PM
Bitmain: Please list the new 2.7Th miner without pouer supply for purchase on your main site =)
I have a feeling theres more than just me with plenty of power supplies to power these waiting to be re-purposed from older antminers.
I have a feeling theres more than just me with plenty of power supplies to power these waiting to be re-purposed from older antminers.
May 29, 2016, 02:23:52 PM
Anyone has an alternate solution to buy the backplane to add an extra fan to the S7-F1 ? I got 4 of thoses and the shipping from bitmain is an ultimate joke. 29$us (UPS is like 60$) for 4 backplanes that cost 2.80$ US.
I would also like 4 fans. If anyone has a cheap source.
Thanks.
I've seen 2 alternative solutions:I would also like 4 fans. If anyone has a cheap source.
Thanks.
1: Fan mounting screws https://bitcointalksearch.org/topic/m.14869061
2: Zip ties https://bitcointalksearch.org/topic/m.14510082
Sanyo Denki SAN Ace 120 3.0 Amp 12 Volt 120mm PWM Fan 224 CFM
http://www.amazon.com/Sanyo-Denki-SAN-Ace-120mm/dp/B00QWB1X3O?ie=UTF8&keywords=sanyo%20san%20ace&qid=1464549874&ref_=sr_1_3&sr=8-3
Delta Tfc1212de Powerful Cooling Fan 12038 12v 3.9A 252cfm 5200rpm
http://www.ebay.com/itm/Delta-Tfc1212de-Powerful-Cooling-Fan-12038-12v-3-9A-252crm-5200rpm-/182103037065?hash=item2a662fd489:g:dE0AAOSwdrRXGmxW
May 29, 2016, 01:26:02 PM
Anyone has an alternate solution to buy the backplane to add an extra fan to the S7-F1 ? I got 4 of thoses and the shipping from bitmain is an ultimate joke. 29$us (UPS is like 60$) for 4 backplanes that cost 2.80$ US.
I would also like 4 fans. If anyone has a cheap source.
Thanks.
I would also like 4 fans. If anyone has a cheap source.
Thanks.
May 29, 2016, 10:20:17 AM
Another s7 model is out.
ANTMINER S7 BATCH 18 with 2 fans - Shipped out from June 2nd. https://enshop.bitmain.com/productDetail.htm?pid=000201605290908457178P0E046905D2
ANTMINER S7 BATCH 18 with 2 fans - Shipped out from June 2nd. https://enshop.bitmain.com/productDetail.htm?pid=000201605290908457178P0E046905D2
May 27, 2016, 04:42:48 PM
ANTMINER S7-LN with power supply - Shipping out from June 2nd
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
Pretty good deal
in what world? this thing is worth like 200$ tops including shipping.
with the halving only 40 days away, and shipping is 6 days away. you got about 30 days or so to make back your 350$ investment. *SPOILER ALERT* you cant..
In my world.
May 27, 2016, 04:00:57 PM
ANTMINER S7-LN with power supply - Shipping out from June 2nd
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
Pretty good deal
in what world? this thing is worth like 200$ tops including shipping.
with the halving only 40 days away, and shipping is 6 days away. you got about 30 days or so to make back your 350$ investment. *SPOILER ALERT* you cant..
well if you have psus in house the included psu is worth at least 85 dollars. if you buy 4 of the lites you get a small shipping break 4 is 1291 usd shipped to the usa.
if you sell the 4 psu's for 291 4 of these = 1000 usd will they earn that I am not sure. you need really cheap power to buy this product
May 27, 2016, 03:54:37 PM
ANTMINER S7-LN with power supply - Shipping out from June 2nd
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
Pretty good deal
in what world? this thing is worth like 200$ tops including shipping.
with the halving only 40 days away, and shipping is 6 days away. you got about 30 days or so to make back your 350$ investment. *SPOILER ALERT* you cant..
May 27, 2016, 03:00:21 PM
I dont know about you guys, but with the halving coming up quite soon....and diff rising estimates....and assuming btc is in a 50$ range....this will maybe ROI in 3 months, then produce about 0.003 btc per day or even less. not calculating electricity. no calculating taxes. I mean its still positive I suppose. I guess thats as close as we are going to get to a home miner.
May 27, 2016, 11:50:09 AM
They've been on the Chinese site for a couple weeks. I wonder if anyone will buy them? With halving coming I don't see much profit.
People are still buying the regular S7, and not just for $450 from Bitmain but up to $600 on Amazon and eBay. With the PSU included it will sell just fine I think. People don't math.
i calculated this S7-LN include shipping total cost 0.704BTC( usd329, ), that's usd121/ THs
for the S7 B17 + APW3-12-1600-B2 1600W include shipping total cost 1.405BTC (usd 658), usd139/ THs
the price of S7-LN is 13% lower than the S7B17
May 27, 2016, 11:07:46 AM
ANTMINER S7-LN with power supply - Shipping out from June 2nd
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
https://bitmaintech.com/productDetail.htm?pid=00020160527114935137wr0xd6U006A9
Speed: 2.7TH/S
Weight: 6.5 kg
Price: 276 USD
( 0.59 BTC )
S7-LN Specifications:
1. Hash Rate: 2.7 TH/s ±5%
2. Power Consumption: 697W + 10% (at the wall, with Enermax, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH + 10%(at the wall, with Enermax, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 90x BM1385
6. Dimensions: 306mm(L)*150mm(W)*275mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M
11.PSU:1000W Enermax golden power supply
Notes:
1. Power consumption figures will vary with the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is included, but the power cord is not included!! Please find one with at least 16A from your local market .There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required.
3.Connections of the power supply:Connect the AC plug to the power source,turn the power switch to the "一".If the power is still off ,please also press the Antminer-switch to the"一".Be sure the wire cable is connected to the Ethernet port before you power the miner on !!
4. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 7x PCIE connectors connected to power supply.
Pretty good deal
May 27, 2016, 10:17:51 AM
They've been on the Chinese site for a couple weeks. I wonder if anyone will buy them? With halving coming I don't see much profit.
People are still buying the regular S7, and not just for $450 from Bitmain but up to $600 on Amazon and eBay. With the PSU included it will sell just fine I think. People don't math.
May 27, 2016, 10:13:38 AM
They've been on the Chinese site for a couple weeks. I wonder if anyone will buy them? With halving coming I don't see much profit.
Jump to: