Topic: AntMinerS4 $1250 Bitmain's Official Partner - Official North America Distributor - page 20. (Read 68481 times)

I'm there dude!! 2 Ants & 1 BFL 30GH'er  

I cannot believe how easy these Ants were & are to setup & swap pool configs  

I do have an easy network though,so that was on my side & didn't know it would be when I bought these.

Thanks again greaterninja !!!!!!!!!!!!!!!!!  

Edit:Looks like I'm the only one    I'll have to go back my pool soon,if no one else jumps on  

Edit again:This can't be right-My hashrate-381,164,031 kh/s..... BTC/per day- 0.146..... USD per day- 87.8920  

You giving out a bonus or something  If so,I may stick around  

Edit..one more time  : I can't seem to put my wallet addy in anywhere............ 

Hi Helnick,


Please try  24.159.196.108:3333 inside the antminer web interface.    Nothing extra like stratum, etc.

Hi Gang,
anyone using Ninjapool?
I just hooked up my S1 and as default the thing is humming away. As soon as I enter my ninjapool info its not working. I have pm'd a few admins but maybe the public can help. I know the ninja team is very busy.


I followed the getting started on the ninjapool site.
STRATUM:   stratum+tcp://24.159.196.108
PORT:   3333
Username:   Weblogin.Worker
Password:   Worker Password

I signed up for an account, added a worker, added payment address. Then went to the ip and added the above info into the antminer hit apply and save.
It doesn't show any activity when I click on miner status page. Do I have to add 3 different pools in the configuration section?
What am I missing?
I have a steady green light under the network cable and a steady red next to that with a blinking green on left. Is this correct?
Any help would be great
edit: opened cgminer added command per you direction. performed reboot.
still nothing.
edit 2:I screwed up ip so I had to reset. I hope that didn't change anything other than the way it came. eg. firmware.

When it first turns on and it is set to default  miner config. the green led on the outside of the box is on. as soon as I set ninja pool it shuts off. and makes a clicking noise trying to start fan but it never starts.

 this is what cgminer gives me in command line.
http://i57.tinypic.com/aoxk6q.png
 

I just noticed this "so I've been cutting the wires from the molex cables and inserting the red/yellow wires into the slots".....The red wires are 5 volt,that could be the problem...

DO NOT use any red wires,just black (negative) & yellow (positive) wires  

And make sure any wires you cut are not touching anything,tape the ends separately(not together in any way) or hook em up,don't leave em dangeling.........

yeahh... ima just scoop one from walmart, then return it after i get my corsair from newegg lol.

Maybe your PSU is bad,try another one............ Molex isn't meant to push anywhere near what PCIExpress can,I know,they give those molex adapters with vid cards,but vid cards don't pull as much wattage as these do.

Also,is it a single rail or multi rail PSU,if you cross the rails on a multi rail PSU they may not "jive" with each,I could be wrong,just thinking out loud 

Nice switch  

whenever i press the on switch on my mobo adapter thing, the board glashes a red and green light for a flash second, then turns off, what does this mean?

got two hashing now wirelessly. seems fine with me as long as it works. the one on the bottom left though with the old 500w power supply, does now have the 6 slot pci where I can just stick it in, so I've been cutting the wires from the molex cables and inserting the red/yellow wires into the slots (one slot has a combination of two, heard that helps) and I have been using the thicker of the wires, not the thin wires, I cut them then put them all, I tried turning it on, and saw one green light for a split second, then it all went out. I am not sure how to do the cutting the wires and inserting into the 12v spots but at least i'm hashing a bit.

As far as something to turn on a standalone PSU,I got a switch from Cablez,he takes BTC & ships fast!!!!!!!  

It comes on a 24pin adapter,but will work on a 20  



BTW,here they are 

The 2 pins that need to be shorted on the ATX power supply are in the first 20pin bunch, so the +4 pins are not affected.  I have a 20pin adapter that works on the 24pin.

was able to plug adapter into other psu, and they are both standalone, i think im making progress! as far as the just letting it be wireless thing goes

ship to uk?

im after 2 -3 units

Really  Very cool,make it so #1,I am #2    

You could always "get er done" later  

You got the PSU as stand alone or plugged in a mobo  Should be ok if in a mobo,your not drawing any power off it,just the CPU & RAM & they shouldn't be stressed just running a browser  

Edit:After some thought,I can't remember if the extra 4pin mobo connector powers the CPU or the PCIExpress slots,you may want to either change the PSU or get a 20-24pin adapter as soon as you can.

Something like this:
http://www.highpowersupply.com/product-ac-2024.htm

More info 

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain20

Scroll down alittle & they talk about the extra 4pins.

I currently have two miners on one 750w corsair because my 500w is 20pin and my adapter switch is for 24pin, is this dangerous right now? Shocked they are both hashing fine.... ~170 each

very good tip true and thanks for looking out.

hashing at 380 gh with two maybe i should just keep wifi? lol

At least your not on DSL    You do have an involved network,that's why I'm stumped,it's going to be bit of work,either way 

Do you have Teamviewer installed   In case someone needs to log on your PC to help.

Also,only let "select" folks help you,IE: high post count or the like    You keep your wallet on the same PC if so,setup another PC/laptop for remote helpers 

yeeeah!! i'll cover half heh. if only cox didn't give me  a shitty cablemodem to begin with ha

I'm powering 2 miners (4 blades) via a 850 watt PSU,my UPS shows 800 watts max & no issues.........so far  

I've read others using the 750w corsair & getting good results,but IRL things vary  

I do plan on getting with sidehack & getting some of those cheap server PSU's,just need his addon boards

https://bitcointalksearch.org/topic/server-power-supply-interface-board-for-standalone-miners-and-gpu-rigs-379677

Tell ya what,I'll offer .02BTC to whoever can help shiunsai & get him mining (on Ethernet cable) @ full speed (170-180GH)    

if i have a 750w corsair, think that can power two? if my second one only has one pci from the 750, then the other one is using power from a 500w?


and yeah,  this is a handicap until ninja or someone gets to me.