Avalon ASIC users thread - page 199.

Bogart

legendary

Activity: 966

Merit: 1000

How can I tell what firmware version I'm running?

ewibit

legendary

Activity: 2955

Merit: 1049

Quote from: ngzhang on March 13, 2013, 04:15:54 AM

check if one of the power cable lost connection to the module.

thx, yes there was a non affiliated cable on the lower PCB...

ngzhang

hero member

Activity: 592

Merit: 501

We will stand and fight.

Quote from: jgarzik on March 13, 2013, 12:53:36 PM

Continuing to experience a "halting problem" on my Avalon ASIC miner:

The miner stops mining, fans stop spinning, but cgminer is alive and responding to API queries.

Pastebin of cgminer API log, at the time of the stopped-mining incident: http://pastebin.com/uiBvaJkH

fan stop spinning? is the ATX power still on? if there is a power fault, you will see a red led light up behind the white (blue led)fan.
if the blue led fan operate normally, i think this is a communication issue between 703N and controlly board. would you please just skip the 703N and connect the control board to a PC and try? do not forget remove the P5 before you do this.

thank you.

ewibit

legendary

Activity: 2955

Merit: 1049

Quote from: jgarzik on March 13, 2013, 12:53:36 PM

Continuing to experience a "halting problem" on my Avalon ASIC miner:

The miner stops mining, fans stop spinning, but cgminer is alive and responding to API queries.

I think here was the same: after been away for xx hours I see now Elapsed x hours in Cgminer Status...
but I am happy that it seemingly restarts

Dalkore

legendary

Activity: 1330

Merit: 1026

Mining since 2010 & Hosting since 2012

Quote from: jgarzik on March 13, 2013, 12:53:36 PM

Continuing to experience a "halting problem" on my Avalon ASIC miner:

The miner stops mining, fans stop spinning, but cgminer is alive and responding to API queries.

Pastebin of cgminer API log, at the time of the stopped-mining incident: http://pastebin.com/uiBvaJkH

Are you running the latest firmware that is linked above? Trying to follow what version people are having issues and success on. Thanks!

D

ProfMac

legendary

Activity: 1246

Merit: 1001

Quote from: jgarzik on March 13, 2013, 12:53:36 PM

Continuing to experience a "halting problem" on my Avalon ASIC miner:

The miner stops mining, fans stop spinning, but cgminer is alive and responding to API queries.

Pastebin of cgminer API log, at the time of the stopped-mining incident: http://pastebin.com/uiBvaJkH

Thank you for a factual, clinically dispassionate report.

jgarzik

legendary

Activity: 1596

Merit: 1091

Continuing to experience a "halting problem" on my Avalon ASIC miner:

The miner stops mining, fans stop spinning, but cgminer is alive and responding to API queries.

Pastebin of cgminer API log, at the time of the stopped-mining incident: http://pastebin.com/uiBvaJkH

ngzhang

hero member

Activity: 592

Merit: 501

We will stand and fight.

Quote from: ewibit on March 12, 2013, 07:50:21 PM

is this speed ok or are there only 2 mining:

Code:

Status MHS5s MinerCount AsicCount
Alive 45621.57 24 10

check if one of the power cable lost connection to the module.

xempew

jr. member

Activity: 45

Merit: 10

Quote from: xiangfu on March 13, 2013, 12:28:42 AM

Hi

We have document the Avalon at this wiki page, please help us on that wiki page.
http://en.qi-hardware.com/wiki/Avalon

You can find the firmwares here:
http://downloads.qi-hardware.com/people/xiangfu/avalon/

ChangeLog:
http://downloads.qi-hardware.com/people/xiangfu/avalon/ChangeLog

This link is always link to latest firmware:
http://downloads.qi-hardware.com/people/xiangfu/avalon/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

Please report bug here:
https://github.com/BitSyncom/cgminer-openwrt-packages

Xiangfu

Thanks Xiangfu for posting this. Assuming I get to make use of this resource you have taken the time to set up (pending delivery from BitSyncom)-- may I have an address to send BTC donation to?

Thanks for your efforts.

xiangfu

full member

Activity: 120

Merit: 100

Hi

We have document the Avalon at this wiki page, please help us on that wiki page.
http://en.qi-hardware.com/wiki/Avalon

You can find the firmwares here:
http://downloads.qi-hardware.com/people/xiangfu/avalon/

ChangeLog:
http://downloads.qi-hardware.com/people/xiangfu/avalon/ChangeLog

This link is always link to latest firmware:
http://downloads.qi-hardware.com/people/xiangfu/avalon/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

Please report bug here:
https://github.com/BitSyncom/cgminer-openwrt-packages

Xiangfu

ewibit

legendary

Activity: 2955

Merit: 1049

uff.....
sweat on my front
it is ok now -> one big connector was not affiliated to the board....
now [MHS av] => 67838.47

kaerf

hero member

Activity: 631

Merit: 500

Quote from: ewibit on March 12, 2013, 07:50:21 PM

is this speed ok or are there only 2 mining:

Code:

Status MHS5s MinerCount AsicCount
Alive 45621.57 24 10

Looks very suspicious. You are running at approximately the speed of 2 modules, so maybe check the module connections. The counts are right, but I dunno if the UI is simply displaying the arguments passed to the miner or if cgminer actually detected 24 and 10.

ewibit

legendary

Activity: 2955

Merit: 1049

now changed to a Stratum only pool:

Code:

[Has Stratum] => true
[Stratum Active] => true
[Stratum URL] => xxx.com
[Has GBT] => false
MHS av=44346.55

with the same hashrate Huh

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: ewibit on March 12, 2013, 07:50:21 PM

is this speed ok or are there only 2 mining:

Code:

Status MHS5s MinerCount AsicCount
Alive 45621.57 24 10

This may be Avalon's broken GBT. If so, you have two options:

Use stratum
Try out the BFGMiner firmware

ewibit

legendary

Activity: 2955

Merit: 1049

is this speed ok or are there only 2 mining:

Code:

Status MHS5s MinerCount AsicCount
Alive 45621.57 24 10

DBordello

sr. member

Activity: 349

Merit: 250

BTCPak.com - Exchange your Bitcoins for MP!

Quote from: kano on March 12, 2013, 06:25:27 PM

Quote from: DBordello on March 12, 2013, 04:21:32 PM

I would like to expose the API to external servers.

What is the proper way to add additional cgminer command line options?

Is there a config file somewhere? I am tempted to edit /etc/init.d/cgminer

Thoughts?

https://bitcointalksearch.org/topic/m.1603316

For what it is worth, my /etc/init.d/cgminer had this line:

PARAMS=" $DEVS $POOL1 $POOL2 $POOL3 --avalon-options 115200:24:10:45:282 -q --api-allow "W:0/0" --api-listen "

I changed --api-allow to be more restrictive.

kano

legendary

Activity: 4466

Merit: 1798

Linux since 1997 RedHat 4

Quote from: DBordello on March 12, 2013, 04:21:32 PM

I would like to expose the API to external servers.

What is the proper way to add additional cgminer command line options?

Is there a config file somewhere? I am tempted to edit /etc/init.d/cgminer

Thoughts?

https://bitcointalksearch.org/topic/m.1603316

organofcorti

donator

Activity: 2058

Merit: 1007

Poor impulse control.

Quote from: SolarSilver on March 12, 2013, 06:27:42 AM

Quote from: organofcorti on March 11, 2013, 09:06:16 PM

Quote from: kaerf on March 11, 2013, 08:01:56 PM

and......the avalon has paid for itself in USD Grin

(paying for itself in BTC will take a lot longer)

*high fives* avalon.

How long did that take?

He paid about BTC 114 for the machine at the time (last week of September 2012)

The price in $USD is $USD 1359 ($USD 1299 + $USD 60 shipping), so 5 or 6 days at the current exchange the purchase breaks even in $USD if he mines about BTC 8 / day

The price in BTC is BTC 114, so unless difficulty skyrockets dramatically, a Batch #1 machine can break even in BTC in about 15 days.

Now..

for Batch #2, wave 0, a machine cost $USD 1500 or BTC 76.2 at the time
for Batch #2, wave 1, a machine cost $USD 1500 or BTC 56.45 at the time

Time will tell when these are delivered and what the $USD/BTC exchange is and more important difficulty. I hope they arrive before BFL starts shipping ;-)

Thanks for the details, SolarSilver.

darkip

full member

Activity: 160

Merit: 100

Quote from: DBordello on March 12, 2013, 04:21:32 PM

Is there a config file somewhere? I am tempted to edit /etc/init.d/cgminer

That's probably (I don't have my Avalons yet) what starts cgminer and seeing some other people post command lines, you should just be able to slap the usual API enabling / configuring arguments on there.

As a batch 2 buyer, my concerns lie with:

Quote from: Avalon's most recent email

A week before batch #2 is ready to ship, we will make an announcement to those who wish to trade-in their last generation units to sent in their units

Given there's been no announcement, I can only presume we're still over a week from the beginning of batch 2 shipping Sad

DBordello

sr. member

Activity: 349

Merit: 250

BTCPak.com - Exchange your Bitcoins for MP!

I would like to expose the API to external servers.

What is the proper way to add additional cgminer command line options?

Is there a config file somewhere? I am tempted to edit /etc/init.d/cgminer

Thoughts?

Topic: Avalon ASIC users thread - page 199. (Read 438378 times)