Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 4. (Read 703060 times)

YUP and it changes every Wednesday or can .

Thanks for the report - I will review this scenario.

Thanks for the detailed feedback. So basically each mining pool provides their own unique mining software?

you are talking about only 2 coin LTC and DOGE.. and only pool... may be you only know this 2 only
but I already said there are some other coins are available

and before talking anybullshit here..
please read msg carefully before .... check SS before replying stupidly.
 you will see the difference and get an idea about what I am talking...

Pure nonsense. Right now at zergpool it's LTC .054 + Doge .033 = .087 merged. as expected.

As I said let's assume merged mining total profit as 1 = 50%+50%  ... but currently software count's only 1st coin profit ( 50 % ) as base profit in profit switching ignoring second coin's 50 %.
In merged mining profit is almost close to double comparing mining single coin.
Like if algo is same for 2 coins and pool supoorts them and offers to mine both coins at same time (Merged mining ) .

Instead of mining separately both coins and wasting power.. we get double reward for same hashrate and power in merged mining. resulted in increased profits significantly

for reference SS is below

Merged mining is rarely 50/50. As I write LTC/DOGE is .07/.02 so it's pretty close to the profit switch threshold.

Hello Patrike

There is one problem while using merged mining in profit switching...
it does not take actual pool Revenue/Profit reported to switch between coin.
Example:
I am mining on a merged mining pool...  actual pool profit as it show on description page is 1$ for two coins (0.5$ + 0.5$... assume)  but it switches pool to another 2nd pool with 3rd coin reports profit of 0.65$ which is greater than the 1st coins profit ( 0.5$ ) ..
which is actually a less profitable pool as 1st pool reporting in total 1$ profit with merged mining...
before running profit switch it should consider total profit revenue of merged mining pool.
will you please fix it.

I was going to ask too I'm glad some else did .
Here is two pools that you can share on and don't have to solo mine on.

if it helps any because you have to use the software miner for that pool mining Qubic.

https://www.apool.io/
Software Miner : https://github.com/apool-io/apoolminer/releases/tag/v1.3.2?download

https://qubic.ninja/
Software miner: https://qubic.ninja/setup#windows

The Main solo pool .
https://app.qubic.li
Software miners: https://github.com/qubic-li/client?tab=readme-ov-file#download

Is it possible to setup qubic mining with awesome miner?  I can get it to run generically, but it doesn't show hash rate or power consumption.   

Awesome Miner version 9.13.4 (Development preview of 10.0)

 ASIC mining
  - Remote Proxy for Raspberry Pi adds support for 64-bit Raspberry Pi OS, in addition to 32-bit
 Features
  - Network scan: When looking for new miners, existing disabled miners can be ignored from matching with new miners
 User interface
  - Heat map: Configurable to count rows from top or from bottom
  - Heat map: View to display worker name
  - Miner list keyboard navigation improved
 Corrections
  - Correction to miner tags and notes being updated incorrectly

Awesome Miner version 9.13.3 (Development preview of 10.0)

 Features
  - Client/Server: Display number of connected Awesome Miner clients and connection details - available on each client
  - Client/Server: Clients can be disconnected via the user interface
 Corrections
  - Correrction to miner list scrolling issue after activating column sorting
  - Corrections to Managed Software UI

Awesome Miner version 9.13.2 (Development preview of 10.0)

 ASIC mining
  - Improved BraiinsOS+ integration. Listed as a separate firmware, configured for each External Miner in the ASIC hardware/firmware field.
 Corrections
  - Correction to clearing of the miner filter field using ESC key
  - Correction to client/server operations
  - Correction to lost miner tags in client/server scenarios
  - General user interface corrections

Awesome Miner version 9.13.1 (Development preview of 10.0)

 Awesome Miner Antminer firmware
  - Full support for installing on Cvitek control boards
 Corrections
  - Correction to performance of miner filter

Awesome Miner version 9.13 (Development preview of 10.0)

 Important note
  - This is the first development preview of Awesome Miner 10.0. It shouldn't be deployed on a large scale for production systems at this moment.
 ASIC mining
  - Introducing Paused state display in the Awesome Miner user interface - to indicate if an Antminer is currently in pause/sleep mode. To enable paused state detection, see the Options dialog, Mining Settings section, Extended monitoring.
  - Improved BraiinsOS+ integration. Reboot, set default pools, LED flash, pause/resume mining and set target power level
  - Display of serial number for Antminer (currently only supported by a few Antminers)
  - Read Environment Temperature for Whatsminer
 GPU mining
  - Managed Software configuration can customize dual mining algorithms
 Features
  - Client/Server concept where multiple Awesome Miner clients can manage a single Awesome Miner server. See Options dialog, Application Services section.
  - Updated heat map look & feel
  - Power curtailment to automatically pause or resume ASIC miners based on electricity price - including integration with a number of providers
  - Automatic discovery for ASIC miners can be configured to detect a specific ASIC type based on IP address range
  - API for management of Miner Groups
 User interface
  - Updated user interface to give a more modern look. Color scheme can be configured via the Options dialog, Appearance section
  - Improved dark mode
  - Managed Software configuration - improve usability by allowing bulk enable and disable for all algorithms
  - New section 'Application services' in the Options dialog, including all settings related to application mode, web server and HTTP API
 Changes
  - Web server must always use multi-user security. Running without authentication is no longer possible

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Hello and thanks for your feedback.
I think this one was added yesterday, but I will double check. Please make sure you update to the latest mining software definitions. Even if you don't see the notification icon you can always try to click the menu item "Update mining software definitions" to make the update. The notification icon can take up to a few hours to show up.

Hey patrike Can you add Team Black Miner 2.25 please. Significant boost in kawpow, firopow and meowpow. (AMD/NVIDIA)

OK thanks

Thanks for the feedback. I've pushed a software definition update for this.

Thanks for the update. I have reported this issue to the XmRig developer so let's hope it will be resolved. The issue can be reproduced using a web browser so it isn't specific to Awesome Miner.

I've reverted back to 6.21.1 for now.