Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 29. (Read 703113 times)

The concept of Privileged API Access isn't needed for more recent Antminers like S19 and L7. Awesome Miner can reboot, change pool and more on them anyway.

I can't unlock my Antminer L7 due to it showing

connection failed

https://prnt.sc/g2XHTkIievS2

How to fix it?

The visible tabs is a UI bug and will be corrected in the next release.

For Windows we detect what the drivers report for the clocking range. For some GPUs on Linux we had hard coded max values - and I will increase these for you.

Hi patrik,

there is a bug in the new version. I updated to the new version 9.3.2 from 9.2.5 and now AwesomeMiner show me the columns Asic chip and firmware log on every miner and not only at asics. When i click on it - AM is hanging 2 seconds and then it jumped to the next column.

Linux:

The memory slider for my RX570 goes only up to 2150, but it must go higher. In windows i can set as high as is enabled in the bios.



Right clock on the miner - choose properties - in the new window click on command line on the left side

i missed it somehwere but how can we set the core clock lock in the awesome miner panel?

Awesome Miner version 9.3.2

 Features
  - Binance pool balance
 Mining software
  - TeamBlackMiner 1.61
  - PhoenixMiner 6.0c
 Correction
  - Correction to update failures of pool balance
  - Correction to UI for history data selection when using 1 day as data resolution

Yes - it will be included now. There will be a new release with a few corrections in a moment.

@Patrike,

Any plans to include PhoenixMiner 6.0c ?

Awesome Miner version 9.3.1

 ASIC mining
  - Added support for Goldshell LT6
  - Display of frequency and voltage for Goldshell ASIC miners. All Goldshell devices details are displayed on the ASIC tab.
 Configuration
  - Additional configuration options for history data resolution
  - Increase the upper limit for number of days to keep history data
  - Configure update interval for Managed Miners
 Mining software
  - Gminer 2.89
  - SrbMiner-Multi 0.9.3
  - TeamBlackMiner 1.60
  - WildRig miner 0.31.3
  - TeamRedMiner 0.9.4.1
  - T-Rex miner 0.25.9
 Corrections
  - Correction to Gminer dual mining setup for full URL pool paths

It's good that you tried with the .NET installation first, as the most common issue is a broken or corrupt .NET installation. Another common issue is that security software is preventing the installation from running successfully.

Also, for the issue related to Awesome Miner not starting correctly, could you please send me the Awesome Miner log file (even if uninstalled, you will still find it):
%localappdata%\AwesomeMiner\AwesomeMiner.log

Thanks!

For the last couple of weeks AM just wouldn't start, occasionally it'd briefly appear in task manager then close, but most of the time nothing.

Figured I'd just try a new install but that's not working either, this problem was reported back in 2014 and it was due to .net framework but I've double checked and I do have 4.8 installed.
,
Windows 10, logged in as an administrator. Any ideas ?

There are a few dual mining design changes planned, to better be able to roll out these frequent new combinations of dual mining algorithms. You will find support for this in the near future.

Hey Patrike,
can you add ETC+TON and ETC+ALPH for lolminer for example. ETC+TON for teamredminer also.

If i choose etchash as algo and dual mining ethereum+ton for example - i can select both pools correctly, but AM only use the ETC pool and do not add the TON pool to the config

Awesome Miner version 9.3

 ASIC mining
  - External Miner configuration is based on a ASIC hardware selection for ASIC miners (no software selection needed). Network scan is also updated to reflect this.
  - Added support for Innosilicon A6+
 GPU mining
  - Add a concept of secondary pool to simplify dual mining without having to use pool groups
  - Improved support for AMD Radeon Pro W6600 and BC-250 on Linux
  - User defined mining software improvements for dual mining
 Features
  - Rule trigger for CPU load
  - Configurable if message dialogs should be suppressed
  - Create API keys per user account making it possible to define limited and read-only API keys
  - Antpool balance
 User interface
  - Display last known worker name for disconnected External Miners
  - Updated description for a number of permissions for user groups
  - Hide buttons in the user interface not relevant for certain ASIC miner types
 Mining software
  - Gminer 2.83
  - Lolminer 1.46a
  - SrbMiner-Multi 0.9.2
  - TeamBlackMiner 1.56
  - TeamRedMiner 0.9.4, incl. update to Awesome Miner integration related to the eth_worker parameter and watchdog
  - T-Rex miner 0.25.8
 Corrections
  - Correction to coin trigger to also support user defined cons
  - Correction to Firmware mining profile trigger
  - Correction to network discovery not processing all IP address ranges in case of a single range with invalid IP address syntax

To make sure I understand the scenario correctly:
1) The External Miner is configured with "Add to worker name" and a value like "5" for example to identify this specific miner
2) You have at lease one pool defined in Awesome Miner (Options dialog, Pools section). Fill in the Pool URL, Worker name and Coin fields. The worker name is either a wallet or a pool username (for example "scmining")
3) You select the miner and go to the toolbar Tools -> ASIC Tools -> Default Pools
4) Select your pool and apply the changes.

Is the operation in step #4 successful?
Did the worker name for this miner become "scmining.5" or similar?

Thanks for the information Patrike but it does not seem to be working for me.

Thanks for the feedback - this is a good point.

Thanks for your question.

If you update the property "Add to worker name" in the properties of an External Miner - nothing will happen right away. Next time you use Awesome Miner to update the pools (toolbar: Tools -> ASIC Tools -> Default Pools) this setting will be used to give each Antminer a unique worker name.

SSH itself can be enabled but it isn't really intended to be used for anything so it might be removed in the future. Was it some specific feature you were looking for via SSH? For pool operations like Add Pool we will soon implement support for it without having to use the classic concepts like Privileged API access.

Click on ClockingProfileGroup and save new ProfileGroup. Now you can select your own name.

Hi, running an antminer s19j pro 104t with Awesome miner custom firmware. The add to miner name setting is not working. I have the setting checked on and text in the field but multiple pools show nothing being added. If I add the info directly in the miner it works but not through Awesome miner.

Also what is the default ssh username and password when using the Awesome miner custom firmware?

Has anyone else see this? Thanks