Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 30. (Read 703512 times)

There are a few dual mining design changes planned, to better be able to roll out these frequent new combinations of dual mining algorithms. You will find support for this in the near future.

Hey Patrike,
can you add ETC+TON and ETC+ALPH for lolminer for example. ETC+TON for teamredminer also.

If i choose etchash as algo and dual mining ethereum+ton for example - i can select both pools correctly, but AM only use the ETC pool and do not add the TON pool to the config

Awesome Miner version 9.3

 ASIC mining
  - External Miner configuration is based on a ASIC hardware selection for ASIC miners (no software selection needed). Network scan is also updated to reflect this.
  - Added support for Innosilicon A6+
 GPU mining
  - Add a concept of secondary pool to simplify dual mining without having to use pool groups
  - Improved support for AMD Radeon Pro W6600 and BC-250 on Linux
  - User defined mining software improvements for dual mining
 Features
  - Rule trigger for CPU load
  - Configurable if message dialogs should be suppressed
  - Create API keys per user account making it possible to define limited and read-only API keys
  - Antpool balance
 User interface
  - Display last known worker name for disconnected External Miners
  - Updated description for a number of permissions for user groups
  - Hide buttons in the user interface not relevant for certain ASIC miner types
 Mining software
  - Gminer 2.83
  - Lolminer 1.46a
  - SrbMiner-Multi 0.9.2
  - TeamBlackMiner 1.56
  - TeamRedMiner 0.9.4, incl. update to Awesome Miner integration related to the eth_worker parameter and watchdog
  - T-Rex miner 0.25.8
 Corrections
  - Correction to coin trigger to also support user defined cons
  - Correction to Firmware mining profile trigger
  - Correction to network discovery not processing all IP address ranges in case of a single range with invalid IP address syntax

To make sure I understand the scenario correctly:
1) The External Miner is configured with "Add to worker name" and a value like "5" for example to identify this specific miner
2) You have at lease one pool defined in Awesome Miner (Options dialog, Pools section). Fill in the Pool URL, Worker name and Coin fields. The worker name is either a wallet or a pool username (for example "scmining")
3) You select the miner and go to the toolbar Tools -> ASIC Tools -> Default Pools
4) Select your pool and apply the changes.

Is the operation in step #4 successful?
Did the worker name for this miner become "scmining.5" or similar?

Thanks for the information Patrike but it does not seem to be working for me.

Thanks for the feedback - this is a good point.

Thanks for your question.

If you update the property "Add to worker name" in the properties of an External Miner - nothing will happen right away. Next time you use Awesome Miner to update the pools (toolbar: Tools -> ASIC Tools -> Default Pools) this setting will be used to give each Antminer a unique worker name.

SSH itself can be enabled but it isn't really intended to be used for anything so it might be removed in the future. Was it some specific feature you were looking for via SSH? For pool operations like Add Pool we will soon implement support for it without having to use the classic concepts like Privileged API access.

Click on ClockingProfileGroup and save new ProfileGroup. Now you can select your own name.

Hi, running an antminer s19j pro 104t with Awesome miner custom firmware. The add to miner name setting is not working. I have the setting checked on and text in the field but multiple pools show nothing being added. If I add the info directly in the miner it works but not through Awesome miner.

Also what is the default ssh username and password when using the Awesome miner custom firmware?

Has anyone else see this? Thanks

Thank you for the answer. Wouldn't it make better sense if "apply and save" button would do so with the profile with specific name that was already chosen to load at start? And only if there's none chosen then create a new one with "default for *".

Nice thanks for this update - SRBminer Dual mining hashrates now shown correctly for me (randomepic+verus)

Thanks for your question. When you use the GPU Clocking tab with the button "Apply and save for miner" it will not only apply the clocking but also create a clocking profile for this specific miner and set it to be used via the Properties of the miner. This is why you see the groups called "Default for ".

This way you don't have to first create clocking profiles and later on specify it to be used on the miner - this button does everything.

Version 9.2.5 (Development preview of 9.3)

 GPU mining
  - Improved secondary coin selection for dual mining
 Features
  - Rule trigger for CPU load
 Mining software
  - Gminer 2.81
  - Lolminer 1.46a

Where are all these "default" profiles and profile groups come from? I sure didn't name any that way.

I've pushed a software definition update to include Lolminer 1.46a. As you point out the 1.46 version was removed.

I will improve the filter feature for the secondary pool in the next release. If you set the algorithm to Unspecified it will show you all pools and will allow you to make the selection.

Sure i will send you the api report.


Nice update for dual mining - but it not working correctly - if i choose t-rex and eth+blake3 - i only can choose eth pools for the secondary coin - but i can´t choose the blake3 / alph pool.


lolminer delete version 1.46 and added 1.46a. So the download link is wrong and thats why you getting this error. Change the auto download link from lolminer and it works again.

Updated it 10 minutes ago, now rigs refuse to start with LOLminer, diagnostics shows this:

Failed to start mining process. Is the Windows Service 'IntelliBreeze Software Maintenance Service' not running?  I'm pretty sure all frameworks libraries are installed with windows updates.

Version 9.2.4 (Development preview of 9.3)

 ASIC mining
  - Added support for Innosilicon A6+
 GPU mining
  - Add a concept of secondary pool to simplify dual mining without having to use pool groups
 User interface
  - Hide buttons in the user interface not relevant for certain ASIC miner types
 Mining software
  - Gminer 2.79
  - Lolminer 1.46
  - TeamBlackMiner 1.56
  - TeamRedMiner 0.9.3
  - T-Rex miner 0.25.8
 Corrections
  - Correction to coin trigger to also support user defined cons
  - Correction to Firmware mining profile trigger
  - Correction to network discovery not processing all IP address ranges in case of a single range with invalid IP address syntax

Can you please send me the API report for this one via PM? Awesome Miner typically tries to figure out the coins being used via the Dual Mode setting, where ETH+ALPH is the only one available right now.

Hey Patrik, thanks for integration of dual mining speed reading for srbminer, but i have found an issue. I see both hashrates as the second hashrate and the first hashrate is always 0. Or is this maybe only when i am mining randomx+epic? Did not test ETH+ALPH.