Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 31. (Read 703146 times)
February 07, 2022, 09:22:21 AM
Opps ! Yes, I see now, overlooked it, thanks Patrike.
February 07, 2022, 09:11:37 AM
Hi Patrike,
Thanks for the update !
New bug for you to fix for BzMiner, the mapping is out of sync in the main lower window for the GPU's with the hash rate per card.
Look forward to another update, thanks again for all your work !
In your screenshot you are using manual mapping where you define your own GPU order. If you disable this (uncheck the box in the "Map to system monitoring" dialog) and let Awesome Miner figure out to the order - is it still incorrect?Thanks for the update !
New bug for you to fix for BzMiner, the mapping is out of sync in the main lower window for the GPU's with the hash rate per card.
Look forward to another update, thanks again for all your work !
Hi Patrike,
Yes, it's still showing the wrong order, I even shut down Awesome Miner and restarted it to double check.
Unless there is another option to change some where else with reference to mapping the GPU's.
The only confusing part here is that for BzMiner, the GPU order in their console window is sorted by PciBusID while they send a different order over the API. So each GPU is showing the correct details - just that the GPU order is sorted differently.
February 07, 2022, 08:57:34 AM
Hi Patrike,
Thanks for the update !
New bug for you to fix for BzMiner, the mapping is out of sync in the main lower window for the GPU's with the hash rate per card.
Look forward to another update, thanks again for all your work !
In your screenshot you are using manual mapping where you define your own GPU order. If you disable this (uncheck the box in the "Map to system monitoring" dialog) and let Awesome Miner figure out to the order - is it still incorrect?Thanks for the update !
New bug for you to fix for BzMiner, the mapping is out of sync in the main lower window for the GPU's with the hash rate per card.
Look forward to another update, thanks again for all your work !
Hi Patrike,
Yes, it's still showing the wrong order, I even shut down Awesome Miner and restarted it to double check.
Unless there is another option to change some where else with reference to mapping the GPU's.
February 07, 2022, 08:48:27 AM
Hi Patrike,
Thanks for the update !
New bug for you to fix for BzMiner, the mapping is out of sync in the main lower window for the GPU's with the hash rate per card.
Look forward to another update, thanks again for all your work !
In your screenshot you are using manual mapping where you define your own GPU order. If you disable this (uncheck the box in the "Map to system monitoring" dialog) and let Awesome Miner figure out to the order - is it still incorrect? Thanks for the update !
New bug for you to fix for BzMiner, the mapping is out of sync in the main lower window for the GPU's with the hash rate per card.
Look forward to another update, thanks again for all your work !
February 07, 2022, 08:31:22 AM
Awesome Miner version 9.2
ASIC mining
- Remote Proxy detection of ASIC miners based on MAC address
- Prepare for Awesome Miner Antminer S19 firmware (to be released soon)
- Added support for StrongU STU-U2
- Improved support for Antminer L7
- Improved compatibility for Whatsminer
- Display of power usage for specific Innosilicon T2 ASIC miners supporting it
GPU mining
- Improved GPU detection on Linux
- Restore of GPU clocking will also reset nVidia locked core clock if set
- Added nVidia CUDA 11.6 detection
Features
- Added rule action for Whatsminer configuration
- Import of Remote Proxy discovery ranges via CSV-file
- Import of Miner Groups via CSV-file
User interface
- Display of configured Windows virtual memory for selected miner
- Multiple miner groups can be removed at once
Mining software
- Added new mining software: BzMiner
- CpuMiner-Opt 3.19.5
- Gminer 2.75
- Lolminer 1.43
- SrbMiner-Multi 0.9.0
- TeamBlackMiner 1.54
- TeamRedMiner 0.9.1
- T-Rex Miner 0.25.2, incl dual mining for Blake3 (ALPH coin)
- XmRig 6.16.4
Correction
- Correction to formatted hashrate string in API response
- Corrections for Remote Proxy on Raspberry Pi
ASIC mining
- Remote Proxy detection of ASIC miners based on MAC address
- Prepare for Awesome Miner Antminer S19 firmware (to be released soon)
- Added support for StrongU STU-U2
- Improved support for Antminer L7
- Improved compatibility for Whatsminer
- Display of power usage for specific Innosilicon T2 ASIC miners supporting it
GPU mining
- Improved GPU detection on Linux
- Restore of GPU clocking will also reset nVidia locked core clock if set
- Added nVidia CUDA 11.6 detection
Features
- Added rule action for Whatsminer configuration
- Import of Remote Proxy discovery ranges via CSV-file
- Import of Miner Groups via CSV-file
User interface
- Display of configured Windows virtual memory for selected miner
- Multiple miner groups can be removed at once
Mining software
- Added new mining software: BzMiner
- CpuMiner-Opt 3.19.5
- Gminer 2.75
- Lolminer 1.43
- SrbMiner-Multi 0.9.0
- TeamBlackMiner 1.54
- TeamRedMiner 0.9.1
- T-Rex Miner 0.25.2, incl dual mining for Blake3 (ALPH coin)
- XmRig 6.16.4
Correction
- Correction to formatted hashrate string in API response
- Corrections for Remote Proxy on Raspberry Pi
Hi Patrike,
Thanks for the update !
New bug for you to fix for BzMiner, the mapping is out of sync in the main lower window for the GPU's with the hash rate per card.
Look forward to another update, thanks again for all your work !
February 07, 2022, 07:59:49 AM
Awesome Miner version 9.2
ASIC mining
- Remote Proxy detection of ASIC miners based on MAC address
- Prepare for Awesome Miner Antminer S19 firmware (to be released soon)
- Added support for StrongU STU-U2
- Improved support for Antminer L7
- Improved compatibility for Whatsminer
- Display of power usage for specific Innosilicon T2 ASIC miners supporting it
GPU mining
- Improved GPU detection on Linux
- Restore of GPU clocking will also reset nVidia locked core clock if set
- Added nVidia CUDA 11.6 detection
Features
- Added rule action for Whatsminer configuration
- Import of Remote Proxy discovery ranges via CSV-file
- Import of Miner Groups via CSV-file
User interface
- Display of configured Windows virtual memory for selected miner
- Multiple miner groups can be removed at once
Mining software
- Added new mining software: BzMiner
- CpuMiner-Opt 3.19.5
- Gminer 2.75
- Lolminer 1.43
- SrbMiner-Multi 0.9.0
- TeamBlackMiner 1.54
- TeamRedMiner 0.9.1
- T-Rex Miner 0.25.2, incl dual mining for Blake3 (ALPH coin)
- XmRig 6.16.4
Correction
- Correction to formatted hashrate string in API response
- Corrections for Remote Proxy on Raspberry Pi
Update: There is a bug with Lolminer hashrate display in this release. It will soon be corrected
ASIC mining
- Remote Proxy detection of ASIC miners based on MAC address
- Prepare for Awesome Miner Antminer S19 firmware (to be released soon)
- Added support for StrongU STU-U2
- Improved support for Antminer L7
- Improved compatibility for Whatsminer
- Display of power usage for specific Innosilicon T2 ASIC miners supporting it
GPU mining
- Improved GPU detection on Linux
- Restore of GPU clocking will also reset nVidia locked core clock if set
- Added nVidia CUDA 11.6 detection
Features
- Added rule action for Whatsminer configuration
- Import of Remote Proxy discovery ranges via CSV-file
- Import of Miner Groups via CSV-file
User interface
- Display of configured Windows virtual memory for selected miner
- Multiple miner groups can be removed at once
Mining software
- Added new mining software: BzMiner
- CpuMiner-Opt 3.19.5
- Gminer 2.75
- Lolminer 1.43
- SrbMiner-Multi 0.9.0
- TeamBlackMiner 1.54
- TeamRedMiner 0.9.1
- T-Rex Miner 0.25.2, incl dual mining for Blake3 (ALPH coin)
- XmRig 6.16.4
Correction
- Correction to formatted hashrate string in API response
- Corrections for Remote Proxy on Raspberry Pi
Update: There is a bug with Lolminer hashrate display in this release. It will soon be corrected
February 07, 2022, 03:56:06 AM
Hi Patrike, in AM ver 9.1.9 lolMiner ver 1.43 not show GPU temp (tested in TONDUAL mode)
Regards
Regards
And no hashrate and no other stats. Please wait, patrike must change the API reading because lolminer changed the API output.
I think patrike will add the dual mining mode.
Patrike please add also eth+alephium for t-rex miner.
Dual mining reading for SRBminer is also needed i think.
There will soon be a new release and it will include T-Rex with ETH+Blake3 (ALPH coin).
February 07, 2022, 03:53:17 AM
Hi Patrike,
Can't get BzMiner to work, including the updated one, same error for any pool.
Also, Summary for the system with ref to the drivers ... Cuda 11.5 when it should be Cuda 11.6
Look forward to fixes in the next update.
The Ethereum pool compatibility for BzMiner is not very good. For Nicehash, the protocol must be specified as "ethstratum+tcp://". I will make an update to make sure Awesome Miner automatically setup this protocol when mining on Nicehash so it will work out of the box.Can't get BzMiner to work, including the updated one, same error for any pool.
Also, Summary for the system with ref to the drivers ... Cuda 11.5 when it should be Cuda 11.6
Look forward to fixes in the next update.
I will also add CUDA 11.6 detection. Right now it will never display a higher value than 11.5.
February 05, 2022, 11:44:08 AM
Hi Patrike, in AM ver 9.1.9 lolMiner ver 1.43 not show GPU temp (tested in TONDUAL mode)
Regards
Regards
And no hashrate and no other stats. Please wait, patrike must change the API reading because lolminer changed the API output.
I think patrike will add the dual mining mode.
Patrike please add also eth+alephium for t-rex miner.
Dual mining reading for SRBminer is also needed i think.
February 05, 2022, 06:16:56 AM
Hi Patrike, in AM ver 9.1.9 lolMiner ver 1.43 not show GPU temp (tested in TONDUAL mode)
Regards
Regards
February 04, 2022, 02:14:37 PM
Hi Patrike,
Can't get BzMiner to work, including the updated one, same error for any pool.
Also, Summary for the system with ref to the drivers ... Cuda 11.5 when it should be Cuda 11.6
Look forward to fixes in the next update.
Can't get BzMiner to work, including the updated one, same error for any pool.
Also, Summary for the system with ref to the drivers ... Cuda 11.5 when it should be Cuda 11.6
Look forward to fixes in the next update.
February 04, 2022, 06:27:06 AM
Awesome Miner version 9.1.9 (Development preview of 9.2)
ASIC mining
- Remote Proxy detection of ASIC miners based on MAC address
- Prepare for Awesome Miner Antminer S19 firmware (to be released soon).
Mining software
- Added new mining software: BzMiner
- TeamBlackMiner 1.50
- T-Rex Miner 0.25.2
ASIC mining
- Remote Proxy detection of ASIC miners based on MAC address
- Prepare for Awesome Miner Antminer S19 firmware (to be released soon).
Mining software
- Added new mining software: BzMiner
- TeamBlackMiner 1.50
- T-Rex Miner 0.25.2
February 04, 2022, 06:23:58 AM
Hi Patrike, please integrate ZelHash(Equihash 125.4) and Nicehash online service for this algo.
T-Rex 0.25.2 dual mining TONCOIN+ETH
Regards
I've pushed an update for Nicehash that you should be able to see soon. I will look into T-Rex as well. T-Rex 0.25.2 dual mining TONCOIN+ETH
Regards
February 03, 2022, 08:22:33 PM
Hi Patrike, please integrate ZelHash(Equihash 125.4) and Nicehash online service for this algo.
T-Rex 0.25.2 dual mining TONCOIN+ETH
Regards
T-Rex 0.25.2 dual mining TONCOIN+ETH
Regards
January 31, 2022, 07:56:17 AM
quick question - I have several Futurebit Apollo's and until recently they were all monitored by Awesomeminer - I did the latest update and got the "disconnected" message for my Futurebit miners - I tried quite a few things before I ended up removing the miner and then tried to re-add them - they use bfgminer, however when I try to do a network scan and attempt to select "miner type" there is no bfgminer - is support of monitoring the Futurebit miners no longer provided? or am I hopefully missing something here?
Bfgminer is hidden by default as it shouldn't have to be selected specifically. It should be possible to monitor ASIC miners with "ASIC Miner (Cgminer compatible)". You can still make Bfgminer visible via the Options dialog, Managed Software section. However, I don't think this will resolve the problem but please let me know your findings here.Futurebit miners are still supported.
got it! and yes it did work when I selected "ASIC Miner (Cgminer compatible)" - I had stopped at that point though previously as I was looking for Bfgminer but now all good again - miners were added.
thank you.
January 31, 2022, 06:39:13 AM
Awesome Miner version 9.1.8 (Development preview of 9.2)
ASIC mining
- Improved compatibility for Whatsminer
- Display of power usage for specific Innosilicon T2 ASIC miners supporting it
GPU mining
- Improved GPU detection on Linux
Features
- Import of Remote Proxy discovery ranges via CSV-file
- Import of Miner Groups via CSV-file
User interface
- Multiple miner groups can be removed at once
Mining software
- CpuMiner-Opt 3.19.5
- Team Black Miner 1.47
- XmRig 6.16.3
Correction
- Correction to formatted hashrate string in API response
ASIC mining
- Improved compatibility for Whatsminer
- Display of power usage for specific Innosilicon T2 ASIC miners supporting it
GPU mining
- Improved GPU detection on Linux
Features
- Import of Remote Proxy discovery ranges via CSV-file
- Import of Miner Groups via CSV-file
User interface
- Multiple miner groups can be removed at once
Mining software
- CpuMiner-Opt 3.19.5
- Team Black Miner 1.47
- XmRig 6.16.3
Correction
- Correction to formatted hashrate string in API response
January 31, 2022, 06:33:16 AM
quick question - I have several Futurebit Apollo's and until recently they were all monitored by Awesomeminer - I did the latest update and got the "disconnected" message for my Futurebit miners - I tried quite a few things before I ended up removing the miner and then tried to re-add them - they use bfgminer, however when I try to do a network scan and attempt to select "miner type" there is no bfgminer - is support of monitoring the Futurebit miners no longer provided? or am I hopefully missing something here?
Bfgminer is hidden by default as it shouldn't have to be selected specifically. It should be possible to monitor ASIC miners with "ASIC Miner (Cgminer compatible)". You can still make Bfgminer visible via the Options dialog, Managed Software section. However, I don't think this will resolve the problem but please let me know your findings here.Futurebit miners are still supported.
January 30, 2022, 01:38:47 PM
quick question - I have several Futurebit Apollo's and until recently they were all monitored by Awesomeminer - I did the latest update and got the "disconnected" message for my Futurebit miners - I tried quite a few things before I ended up removing the miner and then tried to re-add them - they use bfgminer, however when I try to do a network scan and attempt to select "miner type" there is no bfgminer - is support of monitoring the Futurebit miners no longer provided? or am I hopefully missing something here?
January 25, 2022, 09:11:51 AM
Awesome Miner version 9.1.7 (Development preview of 9.2)
ASIC mining
- Added support for StrongU STU-U2
GPU mining
- Restore of GPU clocking will also reset nVidia locked core clock if set
Features
- Added rule action for Whatsminer configuration
User interface
- Display of configured Windows virtual memory for selected miner
Mining software
- Gminer 2.75
- TeamBlackMiner 1.45
- TeamRedMiner 0.9.1
Corrections
- Corrections for Remote Proxy on Raspberry Pi
ASIC mining
- Added support for StrongU STU-U2
GPU mining
- Restore of GPU clocking will also reset nVidia locked core clock if set
Features
- Added rule action for Whatsminer configuration
User interface
- Display of configured Windows virtual memory for selected miner
Mining software
- Gminer 2.75
- TeamBlackMiner 1.45
- TeamRedMiner 0.9.1
Corrections
- Corrections for Remote Proxy on Raspberry Pi
January 25, 2022, 09:11:21 AM
hello,
after update whatsminer m32 to newest firmware, the hashrate is not shown correct (every time much higher than average)
and the power consumption cant be read / is not showing. same FW on m21s shows the power consumption
Can you please send me the API Report (via the toolbar: Tools -> API Report) for both these miners. I should be able to correct this quite fast with the reports. Thanks! after update whatsminer m32 to newest firmware, the hashrate is not shown correct (every time much higher than average)
and the power consumption cant be read / is not showing. same FW on m21s shows the power consumption
Jump to: