[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 413.

puch0021

newbie

Activity: 35

Merit: 0

Quote from: Zaffor on February 15, 2018, 07:16:40 PM

Is it possible to set intensity of a miner for only 1 or 2 algorithms instead of all of them.
I added --intensity on the edit profit profile page

Managed software -> select miner -> user defined command lines per algorithm that you can customize intensity. Note you must add the algorithm name into the command line to start the user defined command line.

E.g. default X17 algorithm starts with x17. In the user defined command line, you also have to start with x17

Zaffor

newbie

Activity: 28

Merit: 2

Is it possible to set intensity of a miner for only 1 or 2 algorithms instead of all of them.
I added --intensity on the edit profit profile page

streaml1ne

newbie

Activity: 32

Merit: 0

Is there a way to change the exchange rate coin that shows in the Dark Tables dashboard? It's showing Bitcoin for me but I usually exchange in Eth, I've tried switching around the coins in the status bar and looking in settings for an option but don't see one.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: geck on February 13, 2018, 04:46:31 PM

I have been checking out awesomeminer and like what i see.

However, the implementation for Excavator is not optimal. For all the supported excavator algos, except neoscrypt, excavator should run with two threads. The current implementation only runs with one thread leading to lower than optimal hashrates.

Is there a way for me to edit the way awesomeminer generates the .json file for excavator?

The Excavator miner uses a configuration file instead of command line parameters, forcing Awesome Miner to generate this configuration file and leaving very little flexibility for the users of Awesome Miner to override the behavior. I can look into making some kind of template configuration file available to open up for customizations, but that feature is not yet available.

According to the Excavator documentation, it should be one worker for almost all configurations - but that might of course not be true for all scenarios:
https://github.com/nicehash/excavator/tree/master/nvidia

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 4.4.4

- Improved failure detection for pools included in the profit switcher, to faster detect failures between the profit switching intervals
- Possible to manually reset the list of failed pools for a miner, to have the profit switcher consider them again. The feature can be access from the View Details dialog where the failed pools are listed.
- Excavator miner will only connect to a single pool (or two pools for dual mining)

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: DByte on February 15, 2018, 01:04:12 PM

Can't benchmark any dual algorithms. I'm getting "No pools specified" every time. Benchmarking single Ethereum works.

Is this for Claymore Ethereum Dual miner or Excavator? Excavator doesn't support benchmarking of dual mining, but that should also have been prevented by Awesome Miner.

Can you please send me the Awesome Miner log file for this?

DByte

member

Activity: 164

Merit: 10

Can't benchmark any dual algorithms. I'm getting "No pools specified" every time. Benchmarking single Ethereum works.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: dasch on February 14, 2018, 09:24:33 PM

Hi,

It may be a bug or something I did wrong but one thing is not working for me.
I share the same profit profile with two miner. When it comes to mining with exacavator (in Lyra in this case), one does it well, the other one keep trying to mine eth or eth+pasc, eth+sia, ...
Even when I ujust leave MPH checked it goes on NH.
I leave you some screenshots ask me if you want an API report or other details.
Except that exverything is working well, it could always be better of course, like checking the real hashrate on the pool, the balance on the pools and so compare the estimate revenue with the pool revenue. And simplify the benchmarking, it should be easyer to test different miners soft on the same algo to keep the best one.

Keep going your software is a really good alternative Wink

Hi,

I would actually be interested in both the log file for Awesome Miner and for the log file on the Remote Agent where the miner is running. Could you send me those via e-mail?

The Awesome Miner Log File can be found via the toolbar Tools -> Log File. Awesome Miner Remote Agent has a log file as well. It can be accessed from the Remote Agent icon in the lower right corner of the screen, where the right-click menu has the option Log File.

The pool balance feature is currently being developed and if all goes well the first version of it will be made available during next week.

cashen

sr. member

Activity: 434

Merit: 251

Quote from: patrike on February 15, 2018, 12:55:12 PM

Quote from: Finnsk3 on February 14, 2018, 11:27:51 PM

Hi guys,

Is there a way to schedule a rule to change my power limit of my GPUs. I can see that in rules I can create a time triggered rule that performs a device command to change the GPU clocks but there is no power limit option.

I have onpeak/offpeak power tariff and peak power is over double the cost of off peak so I want to run an aggressive power limit during peak times and push the cards more during off peak.

I also can write C# so if this isn't easily doable through the gui is it possible to do via the API?

Also, yes I have a premium licence.

Thanks.

Hi,

There is no support for setting power limit via the rules today. I do have plans to improve the clocking profile concept for more flexibility (especially for mixed GPU environments), and making this feature available via the Rules is a good idea as well. Thanks for your feedback.

@Finnsk3 @Patrike
Why couldn't you set a timer to have it switch to a managed template? Where one template calls a high PL and the 2nd calls a low?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Finnsk3 on February 14, 2018, 11:27:51 PM

Hi guys,

Is there a way to schedule a rule to change my power limit of my GPUs. I can see that in rules I can create a time triggered rule that performs a device command to change the GPU clocks but there is no power limit option.

I have onpeak/offpeak power tariff and peak power is over double the cost of off peak so I want to run an aggressive power limit during peak times and push the cards more during off peak.

I also can write C# so if this isn't easily doable through the gui is it possible to do via the API?

Also, yes I have a premium licence.

Thanks.

Hi,

There is no support for setting power limit via the rules today. I do have plans to improve the clocking profile concept for more flexibility (especially for mixed GPU environments), and making this feature available via the Rules is a good idea as well. Thanks for your feedback.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: baf28 on February 15, 2018, 01:11:28 AM

Hello.

In version 4.4.3, the options window does not fit into the screen and its size can not be changed.

sorry, I do not know how to insert pictures here (((

The height of the Options dialog is about 785px. What is the resolution you are running in Windows, and is there any way to increase it? It also looks like the dialog is fully usable even if the very top and bottom isn't fully visible.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Minertek on February 15, 2018, 09:10:57 AM

Hi.I write in this way because I have tried to communicate the last days to [email protected] but I do not receive an answer.Have another means of contact ?, I was having communication with someone from AwesomeMIner support but days ago they stopped responding ...

Hi,

I respond to almost every e-mail within a business day, so it must have been lost somewhere. There are however instances where I do answer an e-mail but it bounces back due to filters on the receiving side. Can you send me your e-mail address via PM and I will search for it?

cashen

sr. member

Activity: 434

Merit: 251

Quote from: Minertek on February 15, 2018, 09:10:57 AM

Hi.I write in this way because I have tried to communicate the last days to [email protected] but I do not receive an answer.Have another means of contact ?, I was having communication with someone from AwesomeMIner support but days ago they stopped responding ...

We might be able to help, what is going on?

Minertek

newbie

Activity: 1

Merit: 0

Hi.I write in this way because I have tried to communicate the last days to [email protected] but I do not receive an answer.Have another means of contact ?, I was having communication with someone from AwesomeMIner support but days ago they stopped responding ...

eminer001

newbie

Activity: 140

Merit: 0

Quote from: moppidoo on February 15, 2018, 05:32:51 AM

while the extra connections from Excavator could be optimized, the fact that zpool had 40k miners and approx 50% of them are yescrypt botnets contradicts that it was AM that brought it down with the Excavator launcher.

AFAIK, Excavator don't mine Yescrypt....and most ppl probably don't primarily mine Yescrypt with GPU

But you do think it is ok to burst pools (that are already overloaded) with 8 times more connections without any purpose, just to mess the statistics and also fill pool connection limit so that everyone receives "connection refused".

Do you think this is acceptable ?

moppidoo

jr. member

Activity: 348

Merit: 5

while the extra connections from Excavator could be optimized, the fact that zpool had 40k miners and approx 50% of them are yescrypt botnets contradicts that it was AM that brought it down with the Excavator launcher.

AFAIK, Excavator don't mine Yescrypt....and most ppl probably don't primarily mine Yescrypt with GPU

eminer001

newbie

Activity: 140

Merit: 0

Quote from: eminer001 on February 14, 2018, 01:53:24 AM

Quote from: eminer001 on February 12, 2018, 01:41:53 AM

Quote from: GoRdiE on February 11, 2018, 08:47:52 AM

Hi, how to enble secondary mining in excavator?

https://i.imgur.com/e3n4Z5q.jpg

https://i.imgur.com/7wUsfTr.jpg

Anyone knows if this bug was fixed ?

The secondary mining on excavator is not starting. Any solution ?

Patrike, can you fix the bug with unnecessary connections, because pools now have 6 times more connections because of this AM bug and are filled with connections without any hash.

Also my statistics from pools are all a mess now, you have all algos to all pools connected when excavator is online.

This is wrong and should have been fixed by now.

Everyone noticed what AM did with this bug?
Zpool went to 40k fake miners and went offline because of your bug, Patrike ! You make 8 connections or more for each excavator instance, to the pools and that is totally wrong, because only one is mining. Can't you read the excavator specifications ? Why do you make so many connections Huh

?

Isn't this a priority for you ?

baf28

newbie

Activity: 117

Merit: 0

Hello.

In version 4.4.3, the options window does not fit into the screen and its size can not be changed.

https://yadi.sk/i/gGQxDwVv3SQtuJ

https://2.downloader.disk.yandex.ru/disk/cc7200b83788d2b9532e8fb29e319ad42a0c22a86035395545037fad78b82048/5a855c4f/EqroJz9HjOjv_LEVN53JAWZ6dCKP3z17DPEz3Y1l8kLo9vC9KRcbTSHpwsgc_N9T2EMIRDZD5YbhfDgNKsEl-w%3D%3D?uid=0&filename=screen1.JPG&disposition=inline&hash=&limit=0&content_type=image%2Fjpeg&fsize=115204&hid=8e2c7ae7ada3eb7342fbe314f81dc07d&media_type=image&tknv=v2&etag=48179aa4c56cd826809625744badefc2

sorry, I do not know how to insert pictures here (((

Finnsk3

newbie

Activity: 13

Merit: 0

Hi guys,

Is there a way to schedule a rule to change my power limit of my GPUs. I can see that in rules I can create a time triggered rule that performs a device command to change the GPU clocks but there is no power limit option.

I have onpeak/offpeak power tariff and peak power is over double the cost of off peak so I want to run an aggressive power limit during peak times and push the cards more during off peak.

I also can write C# so if this isn't easily doable through the gui is it possible to do via the API?

Also, yes I have a premium licence.

Thanks.

dasch

newbie

Activity: 21

Merit: 0

Hi,

It may be a bug or something I did wrong but one thing is not working for me.
I share the same profit profile with two miner. When it comes to mining with exacavator (in Lyra in this case), one does it well, the other one keep trying to mine eth or eth+pasc, eth+sia, ...
Even when I ujust leave MPH checked it goes on NH.
I leave you some screenshots ask me if you want an API report or other details.

https://s9.postimg.org/ex06k5dsv/image.jpg
https://s9.postimg.org/3xez8jv3j/image.jpg

Except that exverything is working well, it could always be better of course, like checking the real hashrate on the pool, the balance on the pools and so compare the estimate revenue with the pool revenue. And simplify the benchmarking, it should be easyer to test different miners soft on the same algo to keep the best one.

Keep going your software is a really good alternative Wink

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 413. (Read 703512 times)