[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 416.

Seanklei10

newbie

Activity: 74

Merit: 0

I'm having an issue with whattomine JSONs. I've added one under the statics section. I then go to setup my pool and typically it would just show up under the "coin" setting when adding a pool to give me the proper dropdown, but its not. Any idea why it wouldn't update the list?

Also, is it possible to take all the JSONs from whattomine so I don't have to keep adding them?

Zaffor

newbie

Activity: 28

Merit: 2

Quote from: L0c0 on February 12, 2018, 06:20:51 PM

Quote from: Zaffor on February 12, 2018, 05:10:56 PM

one of my rigs periodically will stop working. Seems to be losing one of the 7 GPUs for some unknown reason. I can manually restart Awesome and it will mine with the remaining 6 GPUs. Any tool on Awesome to help figure out what the cause is or what card is acting up?

I enabled the notification setting if A.M. detects a problem card (i think) so maybe that at least will let me know when it happens. I think I read somewhere that to have A.M. be able to reboot the PC that auto logon has to be enabled which I am not sure I want to do.

When this happened to me it was due to a bad riser, I got a new one and problem solved. I was able to identify the bad one with MSI Afterburner, the bad card wouldn't report the clock speeds or temperature unless I restarted windows. Hope this helps.

afterburner would not report after it dropped out? When its running all 7 it seems to report fine, I will have to check after it crashes again and looses a gpu

Thanks for the info

L0c0

newbie

Activity: 16

Merit: 0

I have a little science experiment, I wanted to monitor my rig from work using AM, but I've ran into an issue.

It's an 8-GPU rig, have some cards runing Claymore and the rest using Ccminer (KlausT).

Locally it works like a charm, I create 2 external miners, 1 pointing at 127.0.0.1:3333 for claymore, the other pointing at 127.0.0.1:4068, works great.

Next I go into my router's port forwarding menu, set both 3333 and 4068 to the rig's LAN IP. And finally, installed AM in the remote computer this time pointing the external miners to :3333 and :4068. The claymore monitor works great but the ccminer one is dead in the water, just stays "Disconnected". Been digging around not sure what the problem could be.

Is it that ccminer just doesn't like any connection coming from the outside world? Or is there an AM setting that I'm overlooking?

Thanks.

L0c0

newbie

Activity: 16

Merit: 0

Quote from: Zaffor on February 12, 2018, 05:10:56 PM

one of my rigs periodically will stop working. Seems to be losing one of the 7 GPUs for some unknown reason. I can manually restart Awesome and it will mine with the remaining 6 GPUs. Any tool on Awesome to help figure out what the cause is or what card is acting up?

I enabled the notification setting if A.M. detects a problem card (i think) so maybe that at least will let me know when it happens. I think I read somewhere that to have A.M. be able to reboot the PC that auto logon has to be enabled which I am not sure I want to do.

When this happened to me it was due to a bad riser, I got a new one and problem solved. I was able to identify the bad one with MSI Afterburner, the bad card wouldn't report the clock speeds or temperature unless I restarted windows. Hope this helps.

Zaffor

newbie

Activity: 28

Merit: 2

one of my rigs periodically will stop working. Seems to be losing one of the 7 GPUs for some unknown reason. I can manually restart Awesome and it will mine with the remaining 6 GPUs. Any tool on Awesome to help figure out what the cause is or what card is acting up?

I enabled the notification setting if A.M. detects a problem card (i think) so maybe that at least will let me know when it happens. I think I read somewhere that to have A.M. be able to reboot the PC that auto logon has to be enabled which I am not sure I want to do.

wildzer0

newbie

Activity: 28

Merit: 0

Awesome Miner isn't detecting this error condition:

Code:

* VERSIONS: XMRig/2.4.4 libuv/1.18.0 gcc/7.2.0
* HUGE PAGES: available, enabled
* CPU: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz (1) x64 AES-NI
* CPU L2/L3: 1.0 MB/8.0 MB
* THREADS: 4, cryptonight, av=1, donate=5%
* POOL #1: cryptonight.eu.nicehash.com:3355
* API PORT: 4029
* COMMANDS: hashrate, pause, resume
[2018-02-12 18:14:55] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:15:01] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:15:25] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:15:31] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:15:49] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:15:55] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:15:59] speed 2.5s/60s/15m n/a n/a n/a H/s max: n/a H/s
[2018-02-12 18:16:13] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:16:19] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:16:31] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"
[2018-02-12 18:16:43] [cryptonight.eu.nicehash.com:3355] read error: "connection reset by peer"

It just keeps running and not marking the pool dead.

kitenski

newbie

Activity: 21

Merit: 0

Is there any info out there on the various software "agents" available under each Profit Profile? I assume it works through them in order that they are listed and enabled? Trying to work out the ordering I should have and which to enable/disable for NVidia cards?? At the moment I have these enabled (in this order).

Claymore
EWBF
Excavator (old)
CcMiner
DSTM
XMRig

puch0021

newbie

Activity: 35

Merit: 0

Quote from: cc_entrepreneur on February 12, 2018, 04:00:10 AM

Quote from: patrike on February 11, 2018, 06:51:00 AM

Awesome Miner version 4.4.3

- Improved compatibility for the Excavator mining software
- Improved support for running the PhoenixMiner software as user defined Managed Software using API compatibility with Claymore Ethereum miner
- Device profile configuration added for the new dual mining algorithms in Claymore Ethereum miner 11.0
- Correction to the profit switcher for selecting dual mining pools correctly

Hi patrike,

IMO, there needs to be an improvement for the performance tracking (graph) side, here are my opinions:
- how many times miners switched, what were the miners, what was the duration of mining?
- shared packages vs. miners vs. accepted/rejected vs. miner/algo
- hash speed vs. miner vs. algo (e.g. in time domain)
- mining vs. actual/24hr earning regarding to that (i think it is possible from the pool's api)

On the other side, mining the best two/three alternatives simultaneously (depending on the user choice) might be added:
- e.g. nicehash sometimes starts two threads for the half of the gpus for the first profitable option and for the second profitable one, this may reduce the fluctuation in earning.
- e.g. on non-homogenous systems, there may exist different gpus with different performance levels, some of them mines some algo best while the others can't, this may be a sol'n for that.

one final thing is manual intensity setting:
- alexis variants and kalust seems to using higher intensities (>25) for most algos, this may cause the system hang with gpus > 8; while tpruvot version goes well because of the constant i=20
- if there may be a constant intensity entry window for each algo, this may resolve the problem
- smart automatic intensity setting may be a second good feature of course, becase it seems the miner itself can not handle it well

thx a lot for your effort

In terms of intensity - you can already set intensity using the user determined command line per algorithm per miner. Keep in mind you need to repeat the default command line - for ccminer with X17 you would need x17 -i 17 for example

See https://www.awesomeminer.com/help/managedsoftware.aspx

Dalba

newbie

Activity: 92

Merit: 0

Quote from: Dalba on February 12, 2018, 05:14:26 AM

Hello Patrike,
I think there's a bug using excavator with MiningPoolHub. I was surprised to see AM mining but getting nothing on MPH.
When i look in process details, i see this :

Code:

[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2rev2","54.156.205.214:17018","Dalba.Atlantis:x"]},
{"id":2,"method":"algorithm.add","params":["lyra2rev2","lyra2v2.mine.zpool.ca:4533","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":3,"method":"algorithm.add","params":["equihash","172.104.106.153:17023","Dalba.Atlantis:x"]},
{"id":4,"method":"algorithm.add","params":["daggerhashimoto","178.79.168.110:17020","Dalba.Atlantis:x"]},
{"id":5,"method":"algorithm.add","params":["neoscrypt","neoscrypt.mine.zpool.ca:4233","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":6,"method":"algorithm.add","params":["blake2s","blake2s.mine.zpool.ca:5766","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":7,"method":"algorithm.add","params":["equihash","equihash.mine.zpool.ca:2142","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":8,"method":"algorithm.add","params":["keccak","keccak.mine.zpool.ca:5133","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":9,"method":"algorithm.add","params":["neoscrypt","54.156.205.214:17012","Dalba.Atlantis:x"]},
{"id":10,"method":"algorithm.add","params":["keccak","54.156.205.214:17003","Dalba.Atlantis:x"]},
{"id":11,"method":"algorithm.add","params":["nist5","nist5.mine.zpool.ca:3833","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":12,"method":"algorithm.add","params":["sia","54.156.205.214:17022","Dalba.Atlantis:x"]},
{"id":13,"method":"algorithm.add","params":["lbry","lbry.mine.zpool.ca:3334","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]},
{"id":1,"method":"worker.add","params":["0","1"]},
{"id":1,"method":"worker.add","params":["0","2"]},
{"id":1,"method":"worker.add","params":["0","3"]},
{"id":1,"method":"worker.add","params":["0","4"]},
{"id":1,"method":"worker.add","params":["0","5"]},
{"id":1,"method":"worker.add","params":["0","6"]},
{"id":1,"method":"worker.add","params":["0","7"]},
{"id":1,"method":"worker.add","params":["0","8"]},
{"id":1,"method":"worker.add","params":["0","9"]},
{"id":1,"method":"worker.add","params":["0","10"]},
{"id":1,"method":"worker.add","params":["0","11"]},
{"id":1,"method":"worker.add","params":["0","12"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
]

As you can see, there's a mix of parameters pointing to zpool.ca and MiningPoolHub
Moreover it seems that excavator is connecting simultaneously on all algorithms...
Can you look at this ?
For the moment i prefer to desactivate excavator, even if it seems faster...

Finally it seems it was a delay in refresh of my stats on MPH, but there is still a problem regarding all those simultaneous connections.
As you'll see in those 2 pictures, whatever i mine on zpool or MPH, excavator connect to every algorithm on zpool and MPH simultaneously
https://image.noelshack.com/fichiers/2018/07/1/1518440370-capture.jpg
https://image.noelshack.com/fichiers/2018/07/1/1518440369-capture2.jpg

Shouldn't AM create on the fly a correct config file for excavator when it start mining a specific algorithm ?

eminer001

newbie

Activity: 140

Merit: 0

When I benchmark the new Claymore's Dual Ethereum Miner v.11 it seems that it is starting the benchmark with blake2s or SHA-3 but it does not save that benchmark results at all. It seems AM does not save new dual mining algos like blake2s and sha-2 and because it is zero, like you can see in the image below, it will never start dual mining in that configuration, even if it might me more profitable. I guess the same happens with excavator.

https://www.dropbox.com/s/symol53tple8csg/Screenshot%202018-02-12%2014.25.10.png?dl=0

Thank you.

legendary13

newbie

Activity: 29

Merit: 0

when will we have ability to add yiimp based pools to AM?

Dalba

newbie

Activity: 92

Merit: 0

Hello Patrike,
I think there's a bug using excavator ~~with MiningPoolHub. I was surprised to see AM mining but getting nothing on MPH.~~
When i look in process details, i see this :

Code:

[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["lyra2rev2","54.156.205.214:17018","Dalba.Atlantis:x"]},
{"id":2,"method":"algorithm.add","params":["lyra2rev2","lyra2v2.mine.zpool.ca:4533","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":3,"method":"algorithm.add","params":["equihash","172.104.106.153:17023","Dalba.Atlantis:x"]},
{"id":4,"method":"algorithm.add","params":["daggerhashimoto","178.79.168.110:17020","Dalba.Atlantis:x"]},
{"id":5,"method":"algorithm.add","params":["neoscrypt","neoscrypt.mine.zpool.ca:4233","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":6,"method":"algorithm.add","params":["blake2s","blake2s.mine.zpool.ca:5766","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":7,"method":"algorithm.add","params":["equihash","equihash.mine.zpool.ca:2142","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":8,"method":"algorithm.add","params":["keccak","keccak.mine.zpool.ca:5133","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":9,"method":"algorithm.add","params":["neoscrypt","54.156.205.214:17012","Dalba.Atlantis:x"]},
{"id":10,"method":"algorithm.add","params":["keccak","54.156.205.214:17003","Dalba.Atlantis:x"]},
{"id":11,"method":"algorithm.add","params":["nist5","nist5.mine.zpool.ca:3833","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]},
{"id":12,"method":"algorithm.add","params":["sia","54.156.205.214:17022","Dalba.Atlantis:x"]},
{"id":13,"method":"algorithm.add","params":["lbry","lbry.mine.zpool.ca:3334","1AL91xaosJDRfhQiYRyijVdCsZDayeitB:c=BTC"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]},
{"id":1,"method":"worker.add","params":["0","1"]},
{"id":1,"method":"worker.add","params":["0","2"]},
{"id":1,"method":"worker.add","params":["0","3"]},
{"id":1,"method":"worker.add","params":["0","4"]},
{"id":1,"method":"worker.add","params":["0","5"]},
{"id":1,"method":"worker.add","params":["0","6"]},
{"id":1,"method":"worker.add","params":["0","7"]},
{"id":1,"method":"worker.add","params":["0","8"]},
{"id":1,"method":"worker.add","params":["0","9"]},
{"id":1,"method":"worker.add","params":["0","10"]},
{"id":1,"method":"worker.add","params":["0","11"]},
{"id":1,"method":"worker.add","params":["0","12"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
]

As you can see, there's a mix of parameters pointing to zpool.ca and MiningPoolHub
Moreover it seems that excavator is connecting simultaneously on all algorithms...
Can you look at this ?
For the moment i prefer to desactivate excavator, even if it seems faster...

EDIT : Please see my post below

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: eminer001 on February 12, 2018, 01:41:53 AM

Quote from: GoRdiE on February 11, 2018, 08:47:52 AM

Hi, how to enble secondary mining in excavator?

Anyone knows if this bug was fixed ?

The secondary mining on excavator is not starting. Any solution ?

1) There was a dual mining bug in v4.4.2 that was corrected in v.4.4.3.

2) Dual mining with Excavator is currently only supporting the combinations Ethreum + Decred/Sia/Pascal, as these are the predefined dual modes of this mining software

3) If the problem remains, please right click on the miner and select View Details, then go to the Process Information tab where the generated configuration for Excavator is listed. Please share this information with me together with comments on if any of the pools in there are incorrect

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: coolnair on February 11, 2018, 10:21:06 PM

Hello Everyone,

I'm new to this forum. We have around 500 ASICs (S9 and L3). We are not using any specialized software to manage it now. We are only using the built-in Bitmain's access panel which we login using our firewall and vpn. We tried to subscribe to Genesis Hive a couple of months ago, but their team did not reply.

Could experienced members here suggest which software to use for ;

1. General Monitoring
2. Temperature Alerts
3. Switching Pools
4. Switching Coins
5. Low hashing alterts
6. Batch restarts

Regards,

Maddy

Hi and welcome to the forum.

Awesome Miner is doing all of the above, and more. It's very popular to use Awesome Miner in combination with Antminers. Please let me know if you have any additional questions about the software.

cc_entrepreneur

newbie

Activity: 23

Merit: 18

Quote from: patrike on February 11, 2018, 06:51:00 AM

Awesome Miner version 4.4.3

- Improved compatibility for the Excavator mining software
- Improved support for running the PhoenixMiner software as user defined Managed Software using API compatibility with Claymore Ethereum miner
- Device profile configuration added for the new dual mining algorithms in Claymore Ethereum miner 11.0
- Correction to the profit switcher for selecting dual mining pools correctly

Hi patrike,

IMO, there needs to be an improvement for the performance tracking (graph) side, here are my opinions:
- how many times miners switched, what were the miners, what was the duration of mining?
- shared packages vs. miners vs. accepted/rejected vs. miner/algo
- hash speed vs. miner vs. algo (e.g. in time domain)
- mining vs. actual/24hr earning regarding to that (i think it is possible from the pool's api)

On the other side, mining the best two/three alternatives simultaneously (depending on the user choice) might be added:
- e.g. nicehash sometimes starts two threads for the half of the gpus for the first profitable option and for the second profitable one, this may reduce the fluctuation in earning.
- e.g. on non-homogenous systems, there may exist different gpus with different performance levels, some of them mines some algo best while the others can't, this may be a sol'n for that.

one final thing is manual intensity setting:
- alexis variants and kalust seems to using higher intensities (>25) for most algos, this may cause the system hang with gpus > 8; while tpruvot version goes well because of the constant i=20
- if there may be a constant intensity entry window for each algo, this may resolve the problem
- smart automatic intensity setting may be a second good feature of course, becase it seems the miner itself can not handle it well

thx a lot for your effort

eminer001

newbie

Activity: 140

Merit: 0

Quote from: GoRdiE on February 11, 2018, 08:47:52 AM

Hi, how to enble secondary mining in excavator?

https://i.imgur.com/e3n4Z5q.jpg

https://i.imgur.com/7wUsfTr.jpg

Anyone knows if this bug was fixed ?

The secondary mining on excavator is not starting. Any solution ?

cashen

sr. member

Activity: 434

Merit: 251

Quote from: coolnair on February 11, 2018, 10:21:06 PM

Hello Everyone,

I'm new to this forum. We have around 500 ASICs (S9 and L3). We are not using any specialized software to manage it now. We are only using the built-in Bitmain's access panel which we login using our firewall and vpn. We tried to subscribe to Genesis Hive a couple of months ago, but their team did not reply.

Could experienced members here suggest which software to use for ;

1. General Monitoring
2. Temperature Alerts
3. Switching Pools
4. Switching Coins
5. Low hashing alterts
6. Batch restarts

Regards,

Maddy

I hate to say it but you've lost a lot of money by not using Awesome miner.

It hits all those.

coolnair

newbie

Activity: 9

Merit: 0

Hello Everyone,

I'm new to this forum. We have around 500 ASICs (S9 and L3). We are not using any specialized software to manage it now. We are only using the built-in Bitmain's access panel which we login using our firewall and vpn. We tried to subscribe to Genesis Hive a couple of months ago, but their team did not reply.

Could experienced members here suggest which software to use for ;

1. General Monitoring
2. Temperature Alerts
3. Switching Pools
4. Switching Coins
5. Low hashing alterts
6. Batch restarts

Regards,

Maddy

cashen

sr. member

Activity: 434

Merit: 251

Quote from: ruplikminer on February 11, 2018, 08:09:02 PM

Patrike,

I have added to the ONLINE SERVICES the zpool Bitcore. While now it shows correctly in the online services section, the bitcore coin does NOT shows in the COINS list. Shouldn't it appear there also ?

thanks

no.

You need to also add the coin.

ruplikminer

jr. member

Activity: 504

Merit: 3

Patrike,

I have added to the ONLINE SERVICES the zpool Bitcore. While now it shows correctly in the online services section, the bitcore coin does NOT shows in the COINS list. Shouldn't it appear there also ?

thanks

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 416. (Read 703512 times)