Pages:
Author

Topic: Baikal miner Problems,Tips and Help - page 2. (Read 26377 times)

newbie
Activity: 51
Merit: 0
October 27, 2018, 07:54:27 AM
can you guide me how to set fixed ip? I am kinda newbie

in Terminal section of Baikal web interface (enter two commands, press button i, arrow scroll till end of file, type 8 lines, press button esc, type two following lines):

Code:
cd /etc/network
edit interfaces

#insert mode - insert at the end of file

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.1



:wq
reboot

Match address, gateway, dns-nameservers numbers to Your network.

after entering 2nd command, edit interface.. I got error listed below.. any idea? what wrong there
baikal@Baikal:~$ cd /etc/network                                                                  
baikal@Baikal:/etc/network$ edit interfaces                                                        
Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/%{ <
-- HERE (.*?)}/ at /usr/bin/edit line 528.                                                        
Error: no write permission for file "interfaces"                                                  
baikal@Baikal:/etc/network$  




login as root same pw you used for baikal or do 'sudo' infront of the line you did above
newbie
Activity: 3
Merit: 0
October 27, 2018, 07:02:45 AM
can you guide me how to set fixed ip? I am kinda newbie

in Terminal section of Baikal web interface (enter two commands, press button i, arrow scroll till end of file, type 8 lines, press button esc, type two following lines):

Code:
cd /etc/network
edit interfaces

#insert mode - insert at the end of file

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.1



:wq
reboot

Match address, gateway, dns-nameservers numbers to Your network.

after entering 2nd command, edit interface.. I got error listed below.. any idea? what wrong there
baikal@Baikal:~$ cd /etc/network                                                                  
baikal@Baikal:/etc/network$ edit interfaces                                                        
Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/%{ <
-- HERE (.*?)}/ at /usr/bin/edit line 528.                                                        
Error: no write permission for file "interfaces"                                                  
baikal@Baikal:/etc/network$  


sr. member
Activity: 736
Merit: 262
Me, Myself & I
October 24, 2018, 04:18:11 AM
can you guide me how to set fixed ip? I am kinda newbie

in Terminal section of Baikal web interface (enter two commands, press button i, arrow scroll till end of file, type 8 lines, press button esc, type two following lines):

Code:
cd /etc/network
edit interfaces

#insert mode - insert at the end of file

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.1



:wq
reboot

Match address, gateway, dns-nameservers numbers to Your network.
newbie
Activity: 3
Merit: 0
October 24, 2018, 04:02:24 AM
Hi, I have Baikal N240,,I am running into a problem, miner automatically stops working , like it is consuming power and running fan, at pool no hashrate, it happens once a day or somethimes 2 to 3 times.
what I had already done.
1 = Changed my Internet
2 = Firmware updated
3 = Increase fan speed
 ** But all in vein,, any suggestions, image link is attached, https://ibb.co/inEHaq

Use fixed IP instead of DHCP.


can you guide me how to set fixed ip? I am kinda newbie
sr. member
Activity: 736
Merit: 262
Me, Myself & I
October 24, 2018, 02:50:59 AM
Hi, I have Baikal N240,,I am running into a problem, miner automatically stops working , like it is consuming power and running fan, at pool no hashrate, it happens once a day or somethimes 2 to 3 times.
what I had already done.
1 = Changed my Internet
2 = Firmware updated
3 = Increase fan speed
 ** But all in vein,, any suggestions, image link is attached,

Use fixed IP instead of DHCP.
newbie
Activity: 3
Merit: 0
October 24, 2018, 02:21:40 AM
Hi, I have Baikal N240,,I am running into a problem, miner automatically stops working , like it is consuming power and running fan, at pool no hashrate, it happens once a day or somethimes 2 to 3 times.
what I had already done.
1 = Changed my Internet
2 = Firmware updated
3 = Increase fan speed
 ** But all in vein,, any suggestions, image link is attached, https://ibb.co/inEHaq
newbie
Activity: 15
Merit: 0
October 19, 2018, 11:58:35 AM
 Giant B. What is the reason for the blue lights at the back on the hash boards. Some of mine is off but board still hashing perfect. Am i the only person in the world with this problem? Not even baikal customer service have an answer for me Angry
sr. member
Activity: 479
Merit: 253
July 29, 2018, 05:01:12 AM
Does anyone have a link to a guide to navigate/add/remove commands in the terminal?

I want to use the "load-balance" Pool Strategy option for sgminer. But looks like its not a "global" command. So need to get into terminal and add it manually...
legendary
Activity: 3136
Merit: 3213
July 21, 2018, 06:13:59 AM
Maybe take a look at ebay or amazon guess there will be a few that sell this Fans , You can also buy another one he just has to have the same connection plug and specifications as the old, manufacturer should not care, maybe you'll get one of the quieter than the current one ! 


Regards Lafu
jr. member
Activity: 241
Merit: 6
July 20, 2018, 01:13:00 PM
Does anybody know where I could order a fan for a Baikal A900? (I'm in the US) I have a unit that has three broken fan blades. I don't care if I have to cut wires and splice with the wires from the old fan, just want to find a replacement that will work. Please and thank you.
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
July 20, 2018, 11:15:09 AM

So I decided to update my Giant X10 to get the new algos added. The miner was working perfect, except missing the additional 2 new algos. When I fired it back up, both ethernet lights stay solid yellow and green, and there is one blue light flashing on one blade, and one green flashing on another. I am unable to find an ip address for it. I used PI Zero GX10 V1.2. I have powered it on and off several times, and checked all the pins to the pi controller are seated perfectly. When I used windisk imager , it said successful. Any ideas? Please help, this really sucks Sad

Vegas
full member
Activity: 408
Merit: 100
July 07, 2018, 05:47:01 PM
After several restarts the mini & a single slave are operating fine.  Seems it took a couple of 'starts' for my router to assign an IP address. 
newbie
Activity: 21
Merit: 0
July 07, 2018, 09:54:51 AM
Hi there,
I have the famous "no devices running" issue on a Baikal Giant N.
Pools are fully configured and are loaded.
Yesterday, I had a power outage and since then the fan does not speed up full speed anymore.
It just spins very quietly, stops spinning for less than a second and spins very quietly again.
All hints for the issue which I was able to find on the internet and in this forum did not help resolving the issue.
Does anyone know how to further troubleshoot or even better, fix this issue?
Image has been re-flashed. I even changed the Orange PI already but all without success.
thanks in advance
newbie
Activity: 15
Merit: 0
May 22, 2018, 07:31:52 AM
How do you keep you baikal miners running cool. We all know how to extract hot air from the S9's but with a couple of baikal miners in a room with no rear extractor fans.
full member
Activity: 408
Merit: 100
May 20, 2018, 07:35:03 PM
Bought a used baikal mini & the Orange pi keeps sending the cpu error unable to set 1536Mhz.  Saw this mentioned previous.  Is there any solution?  Also the login 'baikal' says wrong password on the site.  Assume this is due to the orange pi error.

Thanks for any help.
newbie
Activity: 31
Merit: 0
May 18, 2018, 11:15:32 AM
i recently bought an used Baikal BK-N (giant N) 20kh/s (CryptoNight, CryptoNight-Lite).
i updated the TF CARD (pizero image and win32diskimager) like explained on baikal website.
i get 6 red lights and it is detecting via the ip address but it doesn't work or mine!
do anyone know how i can get the original settings on the micro SD card?
i signed up an account on baikal website for questions but nowhere is there an answer?
i emailed to [email protected] but no response!

also i can't find no manual or setup on internet so anyone can help me?
jr. member
Activity: 306
Merit: 7
May 13, 2018, 11:50:53 AM
Works great so far. Hashrate is up in the air!
jr. member
Activity: 306
Merit: 7
May 12, 2018, 07:50:39 PM
Here is the next one:
Hanging miner? Hashrate dropping? Pool shows dead?
Restart the miner every 12 or 8 hours by crontab to avoid problems:

Log in to terminal with login "baikal" and pass "baikal".
Besides: "sudo reboot" reboots manually if you prefer to do it manually when needed.
Warning: some times the webinterface hangs and you need to power off and on again (not very often but happens).

To reboot automatically:
Type "sudo crontab -e", chose nano.
Add lines at bottom:
0   00   *   *   *   /sbin/reboot
0   08   *   *   *   /sbin/reboot
0   16   *   *   *   /sbin/reboot
(Add space by pressing tab.)

This will reboot miner at 00, 08, and 16 o clock.
You can check if the reboot worked by checking the uptime. Simply type "uptime" in the console and it shows how long the miner runs.

Cheers
newbie
Activity: 10
Merit: 0
May 11, 2018, 05:11:01 AM
@Andartis

You my man, are brilliant!

I was ready to start flashing a new image to de SD-card, and was getting desperate. But this is a really easy solution.

I write it down so everyone can find it through Google.

Baikal BK-B Nicehash Dead Pools Problem?

Trouble connecting to Nicehash Pools? If all pools are working, but Nicehash is showing DEAD, than restore the sample pools and afterwards replace them by your Nicehash Pools. Do not 'add' the Nicehash pools as new pools, they will show DEAD, but replace the existing pools by the Nicehash pools.

All credits to Andartis for this solution!
jr. member
Activity: 306
Merit: 7
May 11, 2018, 03:54:06 AM
Try resetting / restoring the stock example pools in the backup section. Change the existing lines with pools with your new pools according to algorithm. Delete not needed lines with stock pools afterwards and save.
Pages:
Jump to:
© 2020, Bitcointalksearch.org