Topic: Baikal miner Problems,Tips and Help - page 4. (Read 26293 times)
Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?
Anyone know the admin pw?
I have a couple Giants i'm trying to mess around with.
https://i.imgur.com/mRbC47N.png
I'm not sure if there is an 'admin' account. I looked around in the web root and it's not like there is anything there that you aren't seeing when logged in as 'baikal'. If you SSH into the machine itself, the sudo password (root access) for machine is also 'baikal' I have a couple Giants i'm trying to mess around with.
https://i.imgur.com/mRbC47N.png
Anyone know the admin pw?
I have a couple Giants i'm trying to mess around with.
https://i.imgur.com/mRbC47N.png
I have a couple Giants i'm trying to mess around with.
https://i.imgur.com/mRbC47N.png
Login : Baikal password : baikal
I have the exact same problem. Got Baikal X10 here and the blue LEDs will only blink, but no miner wants to mine, which is strange as the previous owner claims to have tested the miners and confirmed them to be fully functional.
Static IPs given, Orange PI Image used, mining pools configured. Still "Miner DOWN" displayed in the web interface.
Could any one please please help me, to get these running? Mailed the Baikal support, yet didn't receive feedback (yet at least).
Thanks!
Static IPs given, Orange PI Image used, mining pools configured. Still "Miner DOWN" displayed in the web interface.
Could any one please please help me, to get these running? Mailed the Baikal support, yet didn't receive feedback (yet at least).
Thanks!
I own baikal X10.
After turning on the power for a while, the green lamp turns off, the blue lamp flashes,even if I try to open it from the browser it will be Miner down.
Even if you press "Cgminer softu reset", the error message "Miner: 111 Connection refused" will be displayed.
Do you know how to solve this error?
Please help me. Please.
After turning on the power for a while, the green lamp turns off, the blue lamp flashes,even if I try to open it from the browser it will be Miner down.
Even if you press "Cgminer softu reset", the error message "Miner: 111 Connection refused" will be displayed.
Do you know how to solve this error?
Please help me. Please.
try baikal as a password
baikal works for baikal login not admin.
tried, root, baikal, admin
try baikal as a password
baikal works for baikal login not admin.
tried, root, baikal, admin
try baikal as a password
Anyone know the admin pw?
I have a couple Giants i'm trying to mess around with.
I have a couple Giants i'm trying to mess around with.
sometimes I use enable-nicehshsma is very helpful but I more often do manually to add options because more thorough but enable enable-nicehshsma is very helpful to do in a job in a solid time
A few hours ago I followed the advice and set my baikal
with option enable-nicehashsma: true
I did not have the problem of the dead pool
I had only happened a few times
But now that I have enabled this parameter I see that actually now often change the protocol now for example they are all on X13
and is actually having more profit than before
who was standing with the Quark protocol
So actually it's a good thing to enable and add option
enable-nicehashsma: true
In this way our Baikal if we work with nicehash minions always
on the most profitable protocol at the moment.
Control this option enabled for a few days
so I understand if it actually helps
with option enable-nicehashsma: true
I did not have the problem of the dead pool
I had only happened a few times
But now that I have enabled this parameter I see that actually now often change the protocol now for example they are all on X13
and is actually having more profit than before
who was standing with the Quark protocol
So actually it's a good thing to enable and add option
enable-nicehashsma: true
In this way our Baikal if we work with nicehash minions always
on the most profitable protocol at the moment.
Control this option enabled for a few days
so I understand if it actually helps
I didn't have to do enable-nicehashsma: true
for some weird reason it started working on its own.. and all the pools are alive now with nicehash.
for some weird reason it started working on its own.. and all the pools are alive now with nicehash.
Thank you I did not know about this
Then in SGMINER Options
I'm going to Add Option
And I write
In Sgminer options enable-nicehashsma
In Value true
Question how did you insert image in the topic i can not
Then in SGMINER Options
I'm going to Add Option
And I write
In Sgminer options enable-nicehashsma
In Value true
Question how did you insert image in the topic i can not
Does any one know how to connect A900 to nicehash the pool shows up as dead.
edit: samething with zpool
edit: samething with zpool
Yeb enable at sgminer options enable-nicehashsma:true and be sure you have enable Extranonce at miner settings too , restart and the miner should now connect now automaticly to nicehash !
Regards Lafu
Does any one know how to connect A900 to nicehash the pool shows up as dead.
edit: samething with zpool
edit: samething with zpool
Even I have the same problem the car has no physical problems
Only if you change protocol often suffers if you use nicehash
often one of the blades remains idle
Succeeds also with the @baikal 600 but most often with the giant 900
Baikal is far from updating images and the firmware for these products I think we feel a bit abandoned we hope they will continue to develop these products and soon create a firmware or SD image
which solves this problem.
I also have difficulty remote control because I'm behind a non-public IP
and there is nothing left for remote control of baikal without having to use it
a common PC
I did not understand how the Private key in Remote control is generated
And how this part works.
Thank you
Only if you change protocol often suffers if you use nicehash
often one of the blades remains idle
Succeeds also with the @baikal 600 but most often with the giant 900
Baikal is far from updating images and the firmware for these products I think we feel a bit abandoned we hope they will continue to develop these products and soon create a firmware or SD image
which solves this problem.
I also have difficulty remote control because I'm behind a non-public IP
and there is nothing left for remote control of baikal without having to use it
a common PC
I did not understand how the Private key in Remote control is generated
And how this part works.
Thank you
Hi, just to give you an update. My Giant is working again for some weeks now. What worked for me is to clean the whole boards with isopropyl alcohol. This worked for me when repairing my old smartphone and it helped here too. After cleaning I let it alone for some days and it worked again. I don't know if the isopropyl was the solution or if it would have worked anyway, but you can give it a try.
But earnings are very, very low with the giant now and I'm not sure if it's worth bothering with it anymore.
Thx for answer, but my 2 A900 works fine, just 1 of it does not see one of the blades when I(pool) change the algorithm from 11 to any other or from 13 to 11 and the same... i donno why. And its only on 1 A900, second A900 works fine with this situation. But earnings are very, very low with the giant now and I'm not sure if it's worth bothering with it anymore.
Hi, just to give you an update. My Giant is working again for some weeks now. What worked for me is to clean the whole boards with isopropyl alcohol. This worked for me when repairing my old smartphone and it helped here too. After cleaning I let it alone for some days and it worked again. I don't know if the isopropyl was the solution or if it would have worked anyway, but you can give it a try.
But earnings are very, very low with the giant now and I'm not sure if it's worth bothering with it anymore.
But earnings are very, very low with the giant now and I'm not sure if it's worth bothering with it anymore.
I have the same problem too
so I wondered if there are more up-to-date images of PiOne_4G_V3.3_170605.img
Also I would like to understand why the manual is not explained how to create remote management and private keys
and if somehow you can change the host name with baikal user i can not do it i would use a root user to modify in raspian host name.
@baikal
Thank you
so I wondered if there are more up-to-date images of PiOne_4G_V3.3_170605.img
Also I would like to understand why the manual is not explained how to create remote management and private keys
and if somehow you can change the host name with baikal user i can not do it i would use a root user to modify in raspian host name.
@baikal
Thank you
Jump to: