[BBR] Boolberry: Privacy and Security - Guaranteed Since 2014 - page 55.

1blockologist

sr. member

Activity: 505

Merit: 250

Activist Investor

Quote from: mis255 on December 14, 2017, 10:05:50 AM

Quote from: b4h4mu7 on December 14, 2017, 12:03:06 AM

Quote from: doggod on December 13, 2017, 08:37:38 PM

I have mentioned this before as well.
I am not sure why the clintar version will not work either.

A little disappointing especially for new people maybe wanting to participate.
again, is it possible to have someone compile a working version for the non computer programing literate.
or can some one give step by step instructions.

I had posted my error message a while ago but no one has helped to point me in the direction that would resolve my errors. someone else might benefit.

thanks.

Hi doggod,

As CZ mentioned in his post, he is working on a new build that will address the synchronization issues. His seed node commit was a first step towards fixing this issue. He asked to give him a couple of days to get this done then he'd update the website with new binary packages (an application package which contains (pre-built) executable, as opposed to source code). After this no one should be experiencing any issues getting started with the wallet.

I hope this helps clarify the situation.

I compiled https://github.com/cryptozoidberg/boolberry.git and was able to sync from both linux and osx ./boolbd --add-priority-node 5.9.44.154:10101.

Clintar's source at https://github.com/clintar/boolberry/releases/tag/v0.3a wouldn't let me fully sync. The precompiled Windows version in the zip file sync's though.

Hope this helps.

using priority node instead of seed node is working for me, tentatively

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Good news!

Finally I've restored dev environment for qt web kit and built BBR binaries for windows.

As some of oldest community members can remember, at the end of 2014 there was an idea to redesign GUI, we started with Bitcrea and there was even a guy who was making html work for it, but from what I see now I it's in some "intermediate" condition, so I’ve brought back original GUI html.

I’ve tested it on few versions of windows and it worked fine except clean win 7 boot with no service packs installed, the reason is unknown to me yet so please make sure you have at least sp1.

Direct link:
http://boolberry.com/downloads/windows/bbr-win-x64-v0.3.0.43(2d5aa02)-installer.exe

Or check the website for the link.

Please, take a look and let me know if you run into any issues.

Zoidberg.

s1lverbox

legendary

Activity: 2324

Merit: 1039

Quote from: clintar2 on December 14, 2017, 01:21:05 PM

Quote from: s1lverbox on December 14, 2017, 07:06:58 AM

Quote from: ninjacoins on December 14, 2017, 05:53:00 AM

There doesnt seem to be much volume on the exchanges. Seems like not many people want to sell.

We just started offering BBR , volume should pick up slowly. People getting on board BBR slowly. Give it a chance and place order if you looking to buy. Definitely at some point you will get filled.

An interface that allows the payment_id to be seen might encourage deposits

Payment window is fixed. Please refresh with clearing cache in browser to see it more clearly:

Please also report any issue directly to me in my thread.

clintar2

full member

Activity: 202

Merit: 104

Quote from: s1lverbox on December 14, 2017, 07:06:58 AM

Quote from: ninjacoins on December 14, 2017, 05:53:00 AM

There doesnt seem to be much volume on the exchanges. Seems like not many people want to sell.

We just started offering BBR , volume should pick up slowly. People getting on board BBR slowly. Give it a chance and place order if you looking to buy. Definitely at some point you will get filled.

An interface that allows the payment_id to be seen might encourage deposits

mis255

newbie

Activity: 14

Merit: 0

Quote from: b4h4mu7 on December 14, 2017, 12:03:06 AM

Quote from: doggod on December 13, 2017, 08:37:38 PM

I have mentioned this before as well.
I am not sure why the clintar version will not work either.

A little disappointing especially for new people maybe wanting to participate.
again, is it possible to have someone compile a working version for the non computer programing literate.
or can some one give step by step instructions.

I had posted my error message a while ago but no one has helped to point me in the direction that would resolve my errors. someone else might benefit.

thanks.

Hi doggod,

As CZ mentioned in his post, he is working on a new build that will address the synchronization issues. His seed node commit was a first step towards fixing this issue. He asked to give him a couple of days to get this done then he'd update the website with new binary packages (an application package which contains (pre-built) executable, as opposed to source code). After this no one should be experiencing any issues getting started with the wallet.

I hope this helps clarify the situation.

I compiled https://github.com/cryptozoidberg/boolberry.git and was able to sync from both linux and osx ./boolbd --add-priority-node 5.9.44.154:10101.

Clintar's source at https://github.com/clintar/boolberry/releases/tag/v0.3a wouldn't let me fully sync. The precompiled Windows version in the zip file sync's though.

Hope this helps.

dwarf0

newbie

Activity: 49

Merit: 0

People are waiting for better price. I am sure of it is going to get the moon!

Smugl91

newbie

Activity: 5

Merit: 0

I'll try. Thanks.

Newton90

sr. member

Activity: 463

Merit: 256

Quote from: b4h4mu7 on December 14, 2017, 02:32:20 AM

Quote from: Newton90 on December 14, 2017, 12:16:13 AM

Quote from: b4h4mu7 on December 13, 2017, 03:17:33 PM

We're still contining our efforts to get BBR listed on more exchanges to increase access to liquidity and prevent the disaster we experienced at the hands of Poloniex and Bittrex.

any suggestions there are more?

Binance seems likely. I had some conversations with them a few months back but things didn't end up materialzing because my bandwidth was spread pretty thin between everything we were working on at the time. I reached out to them a couple of days ago so we'll see what happens. I know we'd need to make some API improvements for them to support BBR. In particular, adding off-line signing capability. When I first reached out to them they didn't have any CN projects listed but now that they have XMR listed, a BBR integration would probably be much easier for them.

and what about https://bisq.community/t/request-boolberry-bbr/651/12 ?

s1lverbox

legendary

Activity: 2324

Merit: 1039

Quote from: ninjacoins on December 14, 2017, 05:53:00 AM

There doesnt seem to be much volume on the exchanges. Seems like not many people want to sell.

We just started offering BBR , volume should pick up slowly. People getting on board BBR slowly. Give it a chance and place order if you looking to buy. Definitely at some point you will get filled.

ninjacoins

member

Activity: 170

Merit: 10

There doesnt seem to be much volume on the exchanges. Seems like not many people want to sell.

MMichaelix

newbie

Activity: 17

Merit: 0

Quote from: Kliv73 on December 14, 2017, 01:35:42 AM

Quote from: doggod on December 13, 2017, 08:37:38 PM

I have mentioned this before as well.
I am not sure why the clintar version will not work either.

A little disappointing especially for new people maybe wanting to participate.
again, is it possible to have someone compile a working version for the non computer programing literate.
or can some one give step by step instructions.

I had posted my error message a while ago but no one has helped to point me in the direction that would resolve my errors. someone else might benefit.

thanks.

Ask for the updated blockchain.bin and download
Now everything is synchronized

Who would one ask for the updated blockchain?

b4h4mu7

sr. member

Activity: 337

Merit: 315

Quote from: Newton90 on December 14, 2017, 12:16:13 AM

Quote from: b4h4mu7 on December 13, 2017, 03:17:33 PM

We're still contining our efforts to get BBR listed on more exchanges to increase access to liquidity and prevent the disaster we experienced at the hands of Poloniex and Bittrex.

any suggestions there are more?

Binance seems likely. I had some conversations with them a few months back but things didn't end up materialzing because my bandwidth was spread pretty thin between everything we were working on at the time. I reached out to them a couple of days ago so we'll see what happens. I know we'd need to make some API improvements for them to support BBR. In particular, adding off-line signing capability. When I first reached out to them they didn't have any CN projects listed but now that they have XMR listed, a BBR integration would probably be much easier for them.

b4h4mu7

sr. member

Activity: 337

Merit: 315

Quote from: Smugl91 on December 14, 2017, 01:25:57 AM

Hey. Guys know tell me, from the purse of the local led to the exchange of coins. I specified only the address by mistake, but there is no paymement id. Translation is frozen. Can I do something?

Please open up a support ticket with the relative exchange. This has happened a few times already. They should be able to assist you, if you can provide them with all relative info i.e. txid, address etc.

Kliv73

newbie

Activity: 103

Merit: 0

Quote from: hortse on December 13, 2017, 05:47:45 PM

Error while updating blockchain:
2017-Dec-13 23:37:42.281726 [P2P8]Block recognized as orphaned and rejected, id = <71b4c9cae739f83a2a0034a5996479adae6a71b01f0b7f92e75bd297183d6afb>
2017-Dec-13 23:37:42.281726 [P2P8][5.9.44.154:10101 OUT]Block received at sync phase was marked as orphaned, dropping connection
2017-Dec-13 23:37:42.999817 [P2P9]Connecting to 5.9.44.154:10101(white=1, last_seen: d0.h0.m0.s2)...
2017-Dec-13 23:37:43.170339 [P2P8][5.9.44.154:10101 OUT]Sync data returned unknown top block: 561766 -> 933615 [371849 blocks (516 days) behind]
How can I fix this?

Ask for the updated blockchain.bin and download
Now everything is synchronized

Smugl91

newbie

Activity: 5

Merit: 0

Hey. Guys know tell me, from the purse of the local led to the exchange of coins. I specified only the address by mistake, but there is no paymement id. Translation is frozen. Can I do something?

Newton90

sr. member

Activity: 463

Merit: 256

Quote from: b4h4mu7 on December 13, 2017, 03:17:33 PM

We're still contining our efforts to get BBR listed on more exchanges to increase access to liquidity and prevent the disaster we experienced at the hands of Poloniex and Bittrex.

any suggestions there are more?

b4h4mu7

sr. member

Activity: 337

Merit: 315

Quote from: doggod on December 13, 2017, 08:37:38 PM

I have mentioned this before as well.
I am not sure why the clintar version will not work either.

A little disappointing especially for new people maybe wanting to participate.
again, is it possible to have someone compile a working version for the non computer programing literate.
or can some one give step by step instructions.

I had posted my error message a while ago but no one has helped to point me in the direction that would resolve my errors. someone else might benefit.

thanks.

Hi doggod,

As CZ mentioned in his post, he is working on a new build that will address the synchronization issues. His seed node commit was a first step towards fixing this issue. He asked to give him a couple of days to get this done then he'd update the website with new binary packages (an application package which contains (pre-built) executable, as opposed to source code). After this no one should be experiencing any issues getting started with the wallet.

I hope this helps clarify the situation.

1blockologist

sr. member

Activity: 505

Merit: 250

Activist Investor

Quote from: zjy on December 13, 2017, 08:44:54 PM

--seed-node 5.9.44.154:10101 --seed-node 88.197.53.159:10101 --seed-node 62.201.213.25:10101 --seed-node 95.85.21.33:10101 --seed-node 66.228.33.249:10101 --seed-node 59.120.166.36:10101 --seed-node 107.170.97.197:10101 --seed-node 188.226.215.102:10101 --seed-node 128.199.196.65:10101 --seed-node 107.170.228.11:10101 --seed-node 88.99.193.104:10101 --seed-node 138.201.126.98:10101 --seed-node 162.243.210.156:10101 --seed-node 162.243.101.90:10101

its not working, I'm not getting new blocks

I even compiled CZ's master branch from source and launched with all these seed nodes, not getting anything.

I'm on OSX High Sierra, wonder if that has something to do with it

zjy

newbie

Activity: 66

Merit: 0

--seed-node 5.9.44.154:10101 --seed-node 88.197.53.159:10101 --seed-node 62.201.213.25:10101 --seed-node 95.85.21.33:10101 --seed-node 66.228.33.249:10101 --seed-node 59.120.166.36:10101 --seed-node 107.170.97.197:10101 --seed-node 188.226.215.102:10101 --seed-node 128.199.196.65:10101 --seed-node 107.170.228.11:10101 --seed-node 88.99.193.104:10101 --seed-node 138.201.126.98:10101 --seed-node 162.243.210.156:10101 --seed-node 162.243.101.90:10101

doggod

newbie

Activity: 35

Merit: 0

I have mentioned this before as well.
I am not sure why the clintar version will not work either.

A little disappointing especially for new people maybe wanting to participate.
again, is it possible to have someone compile a working version for the non computer programing literate.
or can some one give step by step instructions.

I had posted my error message a while ago but no one has helped to point me in the direction that would resolve my errors. someone else might benefit.

thanks.

Topic: [BBR] Boolberry: Privacy and Security - Guaranteed Since 2014 - page 55. (Read 1210749 times)