Good job !
Will look closely at the further progress !
Always nice to have a new contributor to the btcoin mining hardware field, even if its named BFL...
Topic: BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili - page 50. (Read 73104 times)
August 04, 2013, 06:24:23 AM
August 04, 2013, 06:16:39 AM
Interesting project, will be interested to see what speeds you can get out of it.
August 04, 2013, 04:52:25 AM
good job !
August 04, 2013, 04:17:12 AM
nice work guys, also following this
August 04, 2013, 03:54:52 AM
Are those your sample chips from BFL?
Yes I got 6 samples and BFL give me 6 chips up front(so not really samples)... Idea is to get enough to make 8 and 16 chip board and testrun it to be sure it will not fail in a month...Fantastic.
Keep up the great work!
August 04, 2013, 03:43:22 AM
Are those your sample chips from BFL?
Yes I got 6 samples and BFL give me 6 chips up front(so not really samples)... Idea is to get enough to make 8 and 16 chip board and testrun it to be sure it will not fail in a month... August 04, 2013, 02:17:41 AM
A 16 chip board has got to be really HOT. I have no formal education in this stuff, but given all the issues BFL seems to have, how wise is it to pack so many on a single board?
If it's true and it works that's great. I mean it will be cheaper. I ordered 24 chips so I'll get another 8 to get 2x16 out of it. But I don't want the thing to melt in a week.
Mythbasters have a say "Failure is always a possibility."If it's true and it works that's great. I mean it will be cheaper. I ordered 24 chips so I'll get another 8 to get 2x16 out of it. But I don't want the thing to melt in a week.
Yes it can happen. But not a big chance... How many Singles did that? As far as I know none. And there is not a hi number of GPUs that did that and they are ruining even with higher power then that. And when you look at the numbers of GPUs out there it is clear that this is not something that happens all the time. So if that happens to you you might go and buy Lotto ticket or be afraid of lightning...
EDIT: It will not happen if the board is working normally... Something strange must happen...
August 03, 2013, 11:35:21 PM
A 16 chip board has got to be really HOT. I have no formal education in this stuff, but given all the issues BFL seems to have, how wise is it to pack so many on a single board?
If it's true and it works that's great. I mean it will be cheaper. I ordered 24 chips so I'll get another 8 to get 2x16 out of it. But I don't want the thing to melt in a week.
If it's true and it works that's great. I mean it will be cheaper. I ordered 24 chips so I'll get another 8 to get 2x16 out of it. But I don't want the thing to melt in a week.
August 03, 2013, 09:34:15 PM
Are those your sample chips from BFL?
August 03, 2013, 06:34:59 PM
Project Status:
This board doesn't work with rewB BFL chips so we agreed to licence Chili. There is no time to fix this one. The way to buy it is here https://bitcointalksearch.org/topic/m.3463345
Tests complied 100 production boards ordered for early buyers... We are collecting samples to make one production board hashing with 16 chips. You will be able to order any day now
8 chips board COINADO It is going to be only one board that can handle 4 configurations. 4, 6, 12 and 16 chips
16 chips board COINTAMINATION
Having working test board with chips. Enough power for up to 5 chips. Ignore the BFGMiner-Errors, because hashing is difficult without chips and picture is from time we didn' have them. Production board will have PCI-e power plug...
Chips arrived on Friday so next week we will put them on a board and do some hashing... We also have Jala for tests and analyses(in case our board has any problem).
Will add some more pictures as soon as we have them...
First hash test:
https://www.youtube.com/watch?v=nZIc03dKLIs
Testing 16 chip "board". This is just to see if it works. It will be one board not two put together.
Changes since rev. 1.0 (COINADO):
- New name: COINTAMINATION
- New size: 189.23 x 144.78 mm
- 4-layer PCB for better power-distribution
- Up to 16 BFL-chips can be mounted in 4x4 clusters. (because of heatsink-balance it is not possible to mount a single chip in one cluster, but 2-4 chips per cluster works)
- Each cluster will have one heatsink and a dedicated fan-connector. (plus one main-fan-connector - we try with passive heatsinks and one central fan first)
- Multiple mounting holes for central fan (for 92 and 120 mm fan)
- Now four power-modules (each for every cluster, with independent adjustable voltages and a better sensing-system now)
- USB-Connector changed to "Mini-USB type B"
- two PCIe power-connectors (for up to 8 chips one of them is sufficient)
- Power- and USB-Connectors are now accessible from one side
- Firmware is still BFL-compatible. You can use their software or a tuned version from any open-source project. (There will be many sometime)
First 100 boards
Interested in joining GB https://bitcointalksearch.org/topic/bfl-chip-groupbuy-275chip-50-btcpaypalsepa-420-sold-0100-batch-4-238052
For now you can only buy chips...
Board can be bought with or without chips but price is not jet known but GB buyers will have discount. If this one works without problems it will be 200 to 300$ with current orders in GB if we will have more we might get it under 200$...
Production board:
Will have PCI-e power plug
8 and 16 chip version with probably have 1:1.5 price ratio and close to 1:2 size difference
Like to help?
Sample chips are welcome(PM me)
Have something else that you think can help(PM me)
Rules when ordering:
Processing GB orders and buyers that will help have priority
Bigger orders discounts
Distribution chain and mounting chips:
You will be able to get board assembled and mounted in USA and EU...
Orders:
https://bitcointalksearch.org/topic/m.3463345
We will put you in a waiting queue for assembly when you pay. You will be notice if we are out of stock and get option to be refunded and look at different options. Don't just send chips before we let you know if we have the stock to process you. Some parts have longer lead time and we are ordering them as some as founds are available but we don't have large stock so plan ahead an order ASAP.
Price(without tax or shipping):
Assembled board without chips:
4 chips 420$
8 chips 460$
12 chips 500$
16 chips 540$
Assembled board without chips reflow ready(plastic parts not on):
4 chips 380$
8 chips 420$
12 chips 460$
16 chips 500$
Assembled board with chips(you need to provide the chips):
1-4 chips 480$
5-8 chips 520$
9-12 chips 560$
13-16 chips 600$
Unassembled board+parts:
4 chips 330$
8 chips 370$
12 chips 410$
16 chips 450$
Assembled board with chips as it comes out of reflow(you need to provide the chips and solder plastic parts power modules and capacitors on):
1-4 chips 400$
5-8 chips 440$
9-12 chips 480$
13-16 chips 520$
Just board:
100$
Without cooling:
price -35$ on price
Different configuration? PM me...
Hall of fame:
form - board designer
JerimiahJohnson - PCB Fabrication /Board Assembly & US Reseller
one4many - chip donor
Min€r - chip doner
Bogart - chip donor
af_newbie - chip donor
Warning:
Do not touch chips directly if you don't know what you are doing. You need to be grounded to do that...
Disclaimer:
Board is expected(but not guaranteed) to run at 60GH+ topping out at 70GH but this depends on chips. Chips are sold in mixed lots and are not marked, so it is the luck of the draw. We do not take any responsibility if chips when send to us are damaged. Some packaging that we seen from BFL is inadvertent to protect the chips(static and hydro protection). We also received some dead samples so BFL quality check are probably not adequate and there specifications of chips on page might not be right... We do not test chips more then just to see if they are short circuit. Warranty is limited to board itself not the chips. Each units will be tested prior to shipment and will not ship unless it is working. Should an issue arise due to a non-ASIC problem we can work with you to get it repaired. BFL's ASICs are a bit of an unknown however, and we can not guarantee their longevity or reliability. Board is currently being tested with new BFL chips and we didn't have enough samples to test with 16 chips. So be aware of thus risks to. Once we buy parts we can't refund you in full. This is raped development board that was tested just with samples.
Prices are subject to change.
End price:
The price will include parts, assembly, test. Your quoted shipping price will include antistatic packaging and shipping. We cannot calculate VAT/Tax/Duty for international customers.
This board doesn't work with rewB BFL chips so we agreed to licence Chili. There is no time to fix this one. The way to buy it is here https://bitcointalksearch.org/topic/m.3463345
Tests complied 100 production boards ordered for early buyers... We are collecting samples to make one production board hashing with 16 chips. You will be able to order any day now
16 chips board COINTAMINATION
Having working test board with chips. Enough power for up to 5 chips. Ignore the BFGMiner-Errors, because hashing is difficult without chips and picture is from time we didn' have them. Production board will have PCI-e power plug...
Chips arrived on Friday so next week we will put them on a board and do some hashing... We also have Jala for tests and analyses(in case our board has any problem).
Will add some more pictures as soon as we have them...
First hash test:
https://www.youtube.com/watch?v=nZIc03dKLIs
Testing 16 chip "board". This is just to see if it works. It will be one board not two put together.
Changes since rev. 1.0 (COINADO):
- New name: COINTAMINATION
- New size: 189.23 x 144.78 mm
- 4-layer PCB for better power-distribution
- Up to 16 BFL-chips can be mounted in 4x4 clusters. (because of heatsink-balance it is not possible to mount a single chip in one cluster, but 2-4 chips per cluster works)
- Each cluster will have one heatsink and a dedicated fan-connector. (plus one main-fan-connector - we try with passive heatsinks and one central fan first)
- Multiple mounting holes for central fan (for 92 and 120 mm fan)
- Now four power-modules (each for every cluster, with independent adjustable voltages and a better sensing-system now)
- USB-Connector changed to "Mini-USB type B"
- two PCIe power-connectors (for up to 8 chips one of them is sufficient)
- Power- and USB-Connectors are now accessible from one side
- Firmware is still BFL-compatible. You can use their software or a tuned version from any open-source project. (There will be many sometime)
First 100 boards
Interested in joining GB https://bitcointalksearch.org/topic/bfl-chip-groupbuy-275chip-50-btcpaypalsepa-420-sold-0100-batch-4-238052
For now you can only buy chips...
Board can be bought with or without chips but price is not jet known but GB buyers will have discount. If this one works without problems it will be 200 to 300$ with current orders in GB if we will have more we might get it under 200$...
Production board:
Will have PCI-e power plug
Like to help?
Sample chips are welcome(PM me)
Have something else that you think can help(PM me)
Rules when ordering:
Processing GB orders and buyers that will help have priority
Bigger orders discounts
Distribution chain and mounting chips:
You will be able to get board assembled and mounted in USA and EU...
Orders:
https://bitcointalksearch.org/topic/m.3463345
We will put you in a waiting queue for assembly when you pay. You will be notice if we are out of stock and get option to be refunded and look at different options. Don't just send chips before we let you know if we have the stock to process you. Some parts have longer lead time and we are ordering them as some as founds are available but we don't have large stock so plan ahead an order ASAP.
Price(without tax or shipping):
Assembled board without chips:
4 chips 420$
8 chips 460$
12 chips 500$
16 chips 540$
Assembled board without chips reflow ready(plastic parts not on):
4 chips 380$
8 chips 420$
12 chips 460$
16 chips 500$
Assembled board with chips(you need to provide the chips):
1-4 chips 480$
5-8 chips 520$
9-12 chips 560$
13-16 chips 600$
Unassembled board+parts:
4 chips 330$
8 chips 370$
12 chips 410$
16 chips 450$
Assembled board with chips as it comes out of reflow(you need to provide the chips and solder plastic parts power modules and capacitors on):
1-4 chips 400$
5-8 chips 440$
9-12 chips 480$
13-16 chips 520$
Just board:
100$
Without cooling:
price -35$ on price
Different configuration? PM me...
Hall of fame:
form - board designer
JerimiahJohnson - PCB Fabrication /
one4many - chip donor
Min€r - chip doner
Bogart - chip donor
af_newbie - chip donor
Warning:
Do not touch chips directly if you don't know what you are doing. You need to be grounded to do that...
Disclaimer:
Board is expected(but not guaranteed) to run at 60GH+ topping out at 70GH but this depends on chips. Chips are sold in mixed lots and are not marked, so it is the luck of the draw. We do not take any responsibility if chips when send to us are damaged. Some packaging that we seen from BFL is inadvertent to protect the chips(static and hydro protection). We also received some dead samples so BFL quality check are probably not adequate and there specifications of chips on page might not be right... We do not test chips more then just to see if they are short circuit. Warranty is limited to board itself not the chips. Each units will be tested prior to shipment and will not ship unless it is working. Should an issue arise due to a non-ASIC problem we can work with you to get it repaired. BFL's ASICs are a bit of an unknown however, and we can not guarantee their longevity or reliability. Board is currently being tested with new BFL chips and we didn't have enough samples to test with 16 chips. So be aware of thus risks to. Once we buy parts we can't refund you in full. This is raped development board that was tested just with samples.
Prices are subject to change.
End price:
The price will include parts, assembly, test. Your quoted shipping price will include antistatic packaging and shipping. We cannot calculate VAT/Tax/Duty for international customers.
Jump to: