BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT! - page 10.

coin@coin

legendary

Activity: 1722

Merit: 1000

Quote from: shep80 on November 05, 2013, 07:03:49 PM

Quote from: coin@coin on November 05, 2013, 06:25:56 PM

My 2 boards + PSU have arrived today, that was quick! Ordered Saturday, shipped Monday and arrived Tuesday!

Both boards work fine on Win 8.1 + CGMiner 3.6.6, they average at about 46 GH/s each but only using suggested default settings.

- Used Zadig Driver 2.0.1.160 first for CGMiner to detect them.

- My CGMiner options are: --avalon-options 115200:64:10:50:256 --bitburner-voltage 1300

Has anyone found better options to squeeze a little more out of 2 boards?
Do I need 64 for number of chips even with CGMiner 3.6.6 or should I go with 32 instead?

You should be able to use 32 as you have two boards.

With 4 boards I run:

--avalon-cutoff 63 --bitburner-voltage 1380 --avalon-options 115200:64:10:d:278 --queue 4

This gives right around 50Gh/sec

Thanks for sharing! I'll give it a try! BTW is --queue 4 because you have 4 boards? Shall I use 2 for 2 boards? Grin

OUTSIDE

newbie

Activity: 56

Merit: 0

I bought yesterday one kit of Board + RbPi

Waiting for it! I show you snaps and photos when have it!

ByE!

ummas

sr. member

Activity: 274

Merit: 250

Quote from: cryptx on November 02, 2013, 06:38:41 AM

We had no intention to communicate through forum posts about internal affairs with Burnin.

We did not receive any answer by Burnin in days about financial matters (still waiting for his invoices + we already paid ~65% through discounts)
Now we are held responsible for undelivered promises by Burnin through a forum post.
We are very dissapointed about this to say the least.

I was communicating trugh your website aroun. 20.09.13 and I'm waiting for a replay till now.
I know now /thx to your reply/ that my burning refund won't go truth bitfury boards.
Sad thing.
Maryny its my fault because my order is partially shipped and partially should be refunded.

shep80

full member

Activity: 139

Merit: 100

Quote from: coin@coin on November 05, 2013, 06:25:56 PM

My 2 boards + PSU have arrived today, that was quick! Ordered Saturday, shipped Monday and arrived Tuesday!

Both boards work fine on Win 8.1 + CGMiner 3.6.6, they average at about 46 GH/s each but only using suggested default settings.

- Used Zadig Driver 2.0.1.160 first for CGMiner to detect them.

- My CGMiner options are: --avalon-options 115200:64:10:50:256 --bitburner-voltage 1300

Has anyone found better options to squeeze a little more out of 2 boards?
Do I need 64 for number of chips even with CGMiner 3.6.6 or should I go with 32 instead?

You should be able to use 32 as you have two boards.

With 4 boards I run:

--avalon-cutoff 63 --bitburner-voltage 1380 --avalon-options 115200:64:10:d:278 --queue 4

This gives right around 50Gh/sec

coin@coin

legendary

Activity: 1722

Merit: 1000

My 2 boards + PSU have arrived today, that was quick! Ordered Saturday, shipped Monday and arrived Tuesday!

Both boards work fine on Win 8.1 + CGMiner 3.6.6, they average at about 46 GH/s each but only using suggested default settings.

- Used Zadig Driver 2.0.1.160 first for CGMiner to detect them.

- My CGMiner options are: --avalon-options 115200:64:10:50:256 --bitburner-voltage 1300

Has anyone found better options to squeeze a little more out of 2 boards?
Do I need 64 for number of chips even with CGMiner 3.6.6 or should I go with 32 instead?
I believe I can fiddle with the last 2 set of numbers 50:256 and the voltage, anyone else with 2 boards has some suggestions?

I assume my boards were from batch 3? Maybe still batch 2? I ordered them last week so should I still do a firmware update?
If I connect the provided 2 port Canbus cable I get USB write errors... yes I did add 2 termination jumpers on each board.
So I'm just using 2 x micro USB cables and the USB ports are firmly attached to the boards, no issue so far!

CryptX could you confirm the batch number and if I need a FW Update? Order Number was 1375.

Have to say thanks to Bert at CryptX for the uber fast shipping and if I had more dosh I would get another few, hopefully soon!

Grin

hephaist0s

hero member

Activity: 711

Merit: 532

I've been running one of these for about a month and am completely satisfied. It runs ~50GH/s and is very stable, I've only had to restart it twice in that time.

coin@coin

legendary

Activity: 1722

Merit: 1000

Ordered 2 Miners + 1600W PSU today. Hope to get them next week seen they are in stock and shipping starts on Monday the 4th.
Can't wait to play with them! If they work well and get delivered swiftly I may get a few more.
I will update with feedback when I receive the goods. Cheesy

cryptx

sr. member

Activity: 350

Merit: 250

Screenshot 2 boards:

Screenshot 8 boards:

f.baasch75

member

Activity: 77

Merit: 10

thanks to cryptx and team my 4 boards are running now as they should.
BUT it looks like a lot of power is needed and I am waiting how stable these settings will be.
Best performance seems to depend more on high voltage and less on high frequency.
less voltage means less hashing power.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: cryptx on November 01, 2013, 03:46:31 PM

Quote from: loshia on November 01, 2013, 02:37:08 PM

50 GH is not real guys. That is what I think 40-41 top calculating pool paid shares as suggested by kano. Have that in mind and choose wisely

All boards were tested before we shipped them. The boards are doing ~50GH/s, no doubt about that.
I will take some screenshots.

OK I got it 1.1v

and ambinient about 10 c

What are you getting with .85v

cryptx

sr. member

Activity: 350

Merit: 250

Other screenshot customer:

https://www.dropbox.com/s/2sehjkytbclyk0o/bbf-cgminer.jpg

cryptx

sr. member

Activity: 350

Merit: 250

We had no intention to communicate through forum posts about internal affairs with Burnin.

We did not receive any answer by Burnin in days about financial matters (still waiting for his invoices + we already paid ~65% through discounts)
Now we are held responsible for undelivered promises by Burnin through a forum post.
We are very dissapointed about this to say the least.

cryptx

sr. member

Activity: 350

Merit: 250

Quote from: LainZ on November 01, 2013, 04:37:51 AM

Quote from: anddy78 on October 31, 2013, 11:32:06 AM

Hi, how can I apply the 70% refund from previous Avalon Bitburner purchase? Please. Thanks.

Same here, where can I apply my discount code please cryptx?

We do not convert Burnin orders for this batch. You have to apply for your 50% refund from Burnin.

cryptx

sr. member

Activity: 350

Merit: 250

Quote from: Puppet on November 01, 2013, 04:42:27 AM

Have the self detaching USB ports been fixed?

Yes, the usb port is fixed.

Only if you order a 8 board tower, up to 3 usb can be broken. (you only need 1-2 usb in this case and can connect with canbus)

jelin1984

legendary

Activity: 2408

Merit: 1004

Same believe and me no roi
I think must go at 400 euro

rammy2k2

legendary

Activity: 1974

Merit: 1003

at 500 EUR there is no ROI from the start, why would anyone buy it ?

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: cryptx on November 01, 2013, 04:54:22 PM

screenshot from customer (2 boards)

59 degrees and pushing over 1100mV. Let's see how long till they are toast!

Japs2013

member

Activity: 113

Merit: 10

Hi Cryptx, When will you find time to answer my question about the Bitburner Fury that broke down after running just 10 days? Order #1094
I emailed you on the 21st of October so I'm already sitting around with a broken product for almost 2 weeks, waiting for your answer.

cryptx

sr. member

Activity: 350

Merit: 250

screenshot from customer (2 boards)

cryptx

sr. member

Activity: 350

Merit: 250

Quote from: loshia on November 01, 2013, 02:37:08 PM

50 GH is not real guys. That is what I think 40-41 top calculating pool paid shares as suggested by kano. Have that in mind and choose wisely

All boards were tested before we shipped them. The boards are doing ~50GH/s, no doubt about that.
I will take some screenshots.

Topic: BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT! - page 10. (Read 20779 times)