BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT! - page 5.

goxed

legendary

Activity: 1946

Merit: 1006

Bitcoin / Crypto mining Hardware.

Quote from: whitefeather on November 20, 2013, 12:09:32 AM

Quote from: goxed on November 19, 2013, 06:14:36 PM

Quote from: fex on November 19, 2013, 05:36:30 PM

Received my order today, but I'm not happy with it:
1. USB port at one board has soldering paste all over it and USB plug does not fit it, I need it because I want to use the board alone without CAN bus
2. other boards hash at ~~33-38 GH/s (mean: 34.25 GH/s)~~ mean ~42 GH/s with parameters "--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230"

I tried various parameter settings with latest cgminer from git (https://github.com/ckolivas/cgminer) as well as the one linked in the instruction manual (https://github.com/someone42/cgminer.git).

so: one board unusable, others way below "46-52" GH/s Sad

this is not acceptable

Do your chips have Beta symbol or Bioinfobank ?

Goxed, I am confused. Given the BioInfoBank labels on them, is this somehow related to what tytus et al have been building? I realize they are also working with Bitfury chips, but is the private label attributable to them, and if so how did it end up in a board in Belgium? By the way Fex, that soldering job is utterly hideous. I hope cryptx can replace or refund that board.

Okay so there are some chips which have Beta printed on them and there are some chips with Bioinfobank printed on them. Some people claim that the chips which have Beta printed on them have slightly better quality.

whitefeather

member

Activity: 97

Merit: 10

Quote from: goxed on November 19, 2013, 06:14:36 PM

Quote from: fex on November 19, 2013, 05:36:30 PM

Received my order today, but I'm not happy with it:
1. USB port at one board has soldering paste all over it and USB plug does not fit it, I need it because I want to use the board alone without CAN bus
2. other boards hash at ~~33-38 GH/s (mean: 34.25 GH/s)~~ mean ~42 GH/s with parameters "--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230"

I tried various parameter settings with latest cgminer from git (https://github.com/ckolivas/cgminer) as well as the one linked in the instruction manual (https://github.com/someone42/cgminer.git).

so: one board unusable, others way below "46-52" GH/s Sad

this is not acceptable

Do your chips have Beta symbol or Bioinfobank ?

Goxed, I am confused. Given the BioInfoBank labels on them, is this somehow related to what tytus et al have been building? I realize they are also working with Bitfury chips, but is the private label attributable to them, and if so how did it end up in a board in Belgium? By the way Fex, that soldering job is utterly hideous. I hope cryptx can replace or refund that board.

jermwerty

sr. member

Activity: 472

Merit: 250

Quote from: bclcjunkie on November 19, 2013, 11:23:10 PM

this is what holds me from buying... cryptx you may want to ship preflashed, preassembled miners.. that would be a lot easier for all of us...

Quote from: fex on November 19, 2013, 06:53:01 PM

Don't know, mybe goxed knows more ...

Another thing:
I flashed the firmware linked in the instruction manual on the asic-hardware.com. However, I'm not sure if this is the latest one. Also, I was using "--bitburner-fury-voltage" instead of "--bitburner-voltage" (see https://bitcointalksearch.org/topic/m.3364756) which did have no effect but also did not cause an error message.

To further add to this confusion, the value that I specify does not show up in cgminer, it's always a lower value.
E.g. "--bitburner-voltage 1230" results in
- on startup: message "BTB0: Core voltage set to 1230 millivolts"
- while running: values around 965mV

I think if you check out the "boards" section of the site you get everything you need in the 4 or 8 board packages. I ordered the 8 board setup, and it includes a raspbpi with sd card and everything, only thing missing is a PSU...

bclcjunkie

hero member

Activity: 833

Merit: 1001

this is what holds me from buying... cryptx you may want to ship preflashed, preassembled miners.. that would be a lot easier for all of us...

Quote from: fex on November 19, 2013, 06:53:01 PM

Don't know, mybe goxed knows more ...

Another thing:
I flashed the firmware linked in the instruction manual on the asic-hardware.com. However, I'm not sure if this is the latest one. Also, I was using "--bitburner-fury-voltage" instead of "--bitburner-voltage" (see https://bitcointalksearch.org/topic/m.3364756) which did have no effect but also did not cause an error message.

To further add to this confusion, the value that I specify does not show up in cgminer, it's always a lower value.
E.g. "--bitburner-voltage 1230" results in
- on startup: message "BTB0: Core voltage set to 1230 millivolts"
- while running: values around 965mV

iikun

legendary

Activity: 1062

Merit: 1003

Quote from: fex on November 19, 2013, 05:36:30 PM

Received my order today, but I'm not happy with it:
1. USB port at one board has soldering paste all over it and USB plug does not fit it, I need it because I want to use the board alone without CAN bus
2. other boards hash at ~~33-38 GH/s (mean: 34.25 GH/s)~~ mean ~42 GH/s with parameters "--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230"

I tried various parameter settings with latest cgminer from git (https://github.com/ckolivas/cgminer) as well as the one linked in the instruction manual (https://github.com/someone42/cgminer.git).

so: one board unusable, others way below "46-52" GH/s Sad

this is not acceptable

So I guess their "fix" to stop the USBs coming off the boards (as per below) was to lather them in solder like in this pic?
Looks like amateur hour...

Quote from: cryptx on November 16, 2013, 11:32:44 AM

Quote from: iikun on November 16, 2013, 11:26:07 AM

Quote from: cryptx on November 16, 2013, 10:56:45 AM

Price update:

1,99 BTC / board

Same price as your first boards but 2 months later. Did u even improve all the quality issues like USB ports popping off the board?

The first boards we shipped had this problem, we fixed it for the rest of the deliveries.

If you order a tower of boards, there might be some boards with this problem among them. This is however no issue because the data is passed through the CAN-BUS.
see the discriptions at:

https://www.asic-hardware.com/product/bitburner-fury-4-board-tower/
https://www.asic-hardware.com/product/bitburner-fury-complete-system/

dego

sr. member

Activity: 399

Merit: 250

If you have the the firmware that shows the devices as BTB (and not as BBF) then you should add 300mvolts to your intended voltage. So if you want to run them at 1060mvolts, use the following option:

--bitburner-voltage 1360

(and not bitburner-fury-voltage something..., because that option won't be recognized)

If you want another firmware, check out these posts:
https://bitcointalksearch.org/topic/m.3362916
and:
https://bitcointalksearch.org/topic/m.3364756

fex

full member

Activity: 145

Merit: 100

Don't know, mybe goxed knows more ...

Another thing:
I flashed the firmware linked in the instruction manual on the asic-hardware.com. However, I'm not sure if this is the latest one. Also, I was using "--bitburner-fury-voltage" instead of "--bitburner-voltage" (see https://bitcointalksearch.org/topic/m.3364756) which did have no effect but also did not cause an error message.

To further add to this confusion, the value that I specify does not show up in cgminer, it's always a lower value.
E.g. "--bitburner-voltage 1230" results in
- on startup: message "BTB0: Core voltage set to 1230 millivolts"
- while running: values around 965mV

jelin1984

legendary

Activity: 2408

Merit: 1004

What that mean?
Beta or not beta chips?

fex

full member

Activity: 145

Merit: 100

All my boards have "Bioinfobank" chips.

goxed

legendary

Activity: 1946

Merit: 1006

Bitcoin / Crypto mining Hardware.

Quote from: fex on November 19, 2013, 05:36:30 PM

Received my order today, but I'm not happy with it:
1. USB port at one board has soldering paste all over it and USB plug does not fit it, I need it because I want to use the board alone without CAN bus
2. other boards hash at ~~33-38 GH/s (mean: 34.25 GH/s)~~ mean ~42 GH/s with parameters "--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230"

I tried various parameter settings with latest cgminer from git (https://github.com/ckolivas/cgminer) as well as the one linked in the instruction manual (https://github.com/someone42/cgminer.git).

so: one board unusable, others way below "46-52" GH/s Sad

this is not acceptable

Do your chips have Beta symbol or Bioinfobank ?

jelin1984

legendary

Activity: 2408

Merit: 1004

These is not for sure good news

fex

full member

Activity: 145

Merit: 100

Received my order today, but I'm not happy with it:
1. USB port at one board has soldering paste all over it and USB plug does not fit it, I need it because I want to use the board alone without CAN bus
2. other boards hash at ~~33-38 GH/s (mean: 34.25 GH/s)~~ mean ~42 GH/s with parameters "--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230"

I tried various parameter settings with latest cgminer from git (https://github.com/ckolivas/cgminer) as well as the one linked in the instruction manual (https://github.com/someone42/cgminer.git).

so: one board unusable, others way below "46-52" GH/s Sad

this is not acceptable

jelin1984

legendary

Activity: 2408

Merit: 1004

final does not work with cgminer?

any official details
from the maker

jermwerty

sr. member

Activity: 472

Merit: 250

Quote from: cixelsyddyslexic on November 19, 2013, 01:43:40 PM

Pretty sure that's one of the perks (for them) of putting prices in BTC. Just saying

Yes exactly!

Miners return BTC not USD, and generally at a *mostly* predictable rate, so if they priced it in USD (say $675 or 499 euro) heck that is little under 1BTC per and ROI becomes just a little over 3 weeks - why sell at all?

I've always bought miners with BTC based on BTC ROI, fiat price really becomes mostly irrelevant. I don't think the ~45 day ROI payoff on these Furys are unreasonable at all, and in fact for an IN HAND ASIC is really is a steller deal historically! (disclaimer: I bought an 8 board set as a no-brainer with the price "drop" using already-mined coins, so my view is a bit different than someone converting fiat>BTC to buy these...)

I dunno. Just compare to ASICMINER cube. Same price, much more power draw on the cube for a fraction of the hashrate, and those are sold out! (disclaimer: I dump'd my blades a long time ago, just not worth the hassle/power draw, I guess I am biased...)

3ds

full member

Activity: 238

Merit: 100

Quote from: chr0me on November 19, 2013, 02:36:35 PM

Nah, can't get cgminer to actually use --bitburner-fury-options. It will recognise it but discard it...
Use --avalon-options for now.

Makes no difference here Sad

chr0me

member

Activity: 108

Merit: 10

Quote from: 3ds on November 19, 2013, 02:29:40 PM

IMHO there is something wrong wrong in the way cgminer used my settings. Because it's not changing the mining speed in any way.
Can someone confirm that he can explicit affected the speed with --bitburner-fury-options Huh

Nah, can't get cgminer to actually use --bitburner-fury-options. It will recognise it but discard it...
Use --avalon-options for now.

3ds

full member

Activity: 238

Merit: 100

Quote from: dego on November 19, 2013, 01:04:55 PM

Are you cooling your board properly? Mine sits in a garage where its around 10 degrees and 2 x 12mm fans are working...

And what kind of pool are you mining on?

What kind of psu do you use?

I added two more fans. But IMHO it can be a cooling problem, because IMHO it should then start at high speed and throttle with the time down... But in my case it's always not higher than 30GH/s...

The PSU should be also no problem.

I'm tested on eligius.st and multipool.us

How can i see if i have the last firmware? How can i see, how many ASCIS really working?

IMHO there is something wrong wrong in the way cgminer used my settings. Because it's not changing the mining speed in any way.
Can someone confirm that he can explicit affected the speed with --bitburner-fury-options Huh

crazyearner

legendary

Activity: 1820

Merit: 1001

Price needs to be changed in terms of BTC price.

ace2000

newbie

Activity: 2

Merit: 0

+1 for USD/euros

cixelsyddyslexic

newbie

Activity: 25

Merit: 0

Quote from: koullis on November 19, 2013, 01:05:11 PM

Quote from: roy7 on November 18, 2013, 10:14:08 PM

Well BTC/USD is out of control right now. Just nuts.

I'd suggest you price the miners in USD/Euro instead.

+1

everyone should put prices to USD/Euro since the high rise of btc exchange

Pretty sure that's one of the perks (for them) of putting prices in BTC. Just saying

Topic: BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT! - page 5. (Read 20779 times)