Well BTC/USD is out of control right now. Just nuts.
I'd suggest you price the miners in USD/Euro instead.
I'd suggest you price the miners in USD/Euro instead.
+1
everyone should put prices to USD/Euro since the high rise of btc exchange
Topic: BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT! - page 6. (Read 20790 times)
+1
everyone should put prices to USD/Euro since the high rise of btc exchange
Are you cooling your board properly? Mine sits in a garage where its around 10 degrees and 2 x 12mm fans are working...
And what kind of pool are you mining on?
What kind of psu do you use?
And what kind of pool are you mining on?
What kind of psu do you use?
how quick do they get into america?
Ordered Monday scheduled for delivery to US West coast by 10.30am Wed.
3 days is pretty good!
why hashing at 30gh
when the seller tell 50gh?
when the seller tell 50gh?
It seems that every changes i made results in round about 30GH/s... So i think no of my options will be really used 
I use cgminer v3.8.2
I have downgrade to 3.7.2 and to 3.6.6...I use cgminer v3.8.2
What should i say... It stays at ~28GH/s
So, have i got a defect board?
Btw. I had observed that there was some dust to the black cooler. So i think my board must run more than for a simple test...
cgminer --usb 1:18 --disable-gpu --avalon-options 115200:32:10:d:274 --bitburner-fury-voltage 1070
results in ~28GH/s...Use only --avalon-auto gives me ~28GH/s...
It seems that every changes i made results in round about 30GH/s... So i think no of my options will be really used
I use cgminer v3.8.2
It it a known bug?
btw. if i turn on the debug mode (press [D]isplay and [D]ebug) i see this messages often: Get avalon read got err 0 sometimes: invalid nonce
What drivers must install for windows cgminer run?
HASHING SPEED?
Will see, could not connect em yet... will update you asap...
with 115200:16:10:47:270 i get ~26GH/s
with 115200:32:10:47:270 i get ~28GH/s
with 115200:16:10:45:282 i get ~28GH/s
So it seems that it is equal which --bitburner-fury-options i used... ?
should i use --avalon-options ?
btw. what's with --avalon-auto
with 115200:32:10:47:270 i get ~28GH/s
with 115200:16:10:45:282 i get ~28GH/s
So it seems that it is equal which --bitburner-fury-options i used... ?
should i use --avalon-options ?
btw. what's with --avalon-auto
Until now I had one board running at 50Ghs with this line:
cgminer --usb 1:18 --disable-gpu --avalon-options 115200:32:10:d:274 --bitburner-fury-voltage 1070
the --usb option sets the USB Bus and device....
It is one board so 32 is right...
HASHING SPEED?
Got my boards today. Ordered yesterday. 
with 115200:16:10:47:270 i get ~26GH/s
with 115200:32:10:47:270 i get ~28GH/s
with 115200:16:10:45:282 i get ~28GH/s
So it seems that it is equal which --bitburner-fury-options i used... ?
should i use --avalon-options ?
btw. what's with --avalon-auto
with 115200:32:10:47:270 i get ~28GH/s
with 115200:16:10:45:282 i get ~28GH/s
So it seems that it is equal which --bitburner-fury-options i used... ?
should i use --avalon-options ?
btw. what's with --avalon-auto
how quick do they get into america?
Where are u located and can i pick them up instead of paying customs
I tested 2, 16, 32 and 64... I get always around 30GH/s
Well, of course. you need to change 50:256.
Code:
example timeout values / clock frequencies:
45:282
47:270
50:256 (default)
45:282
47:270
50:256 (default)
I'm using 47:270
Anyone know what an acceptable HW rate is for Furys?
I have it. It works after i shutdown the PC / Fury completely... After cold start it works!
With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...
With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...
Shouldn't that be 64? 32 for one board. Are you using the newest cgminer?
Quote
For BitBurner X and BitBurner XX devices you should use twice the number of
boards in the stack. e.g. for a two-board stack you would use 4. For
BitBurner Fury devices you should use the total number of BitFury chips in the
stack (i.e. 16 times the number of boards). e.g. for a two-board stack you
would use 32.
boards in the stack. e.g. for a two-board stack you would use 4. For
BitBurner Fury devices you should use the total number of BitFury chips in the
stack (i.e. 16 times the number of boards). e.g. for a two-board stack you
would use 32.
I tested 2, 16, 32 and 64... I get always around 30GH/s
I have it. It works after i shutdown the PC / Fury completely... After cold start it works!
With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...
With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...
Shouldn't that be 64? 32 for one board. Are you using the newest cgminer?
34 gh for a board of 50gh?
He's using the standard values. I'm getting around 45~52gh/s with 45:282
Is anyone getting any errors with --butburner-fury-options? cgminer doesn't even start when I use that.
34 gh for a board of 50gh?
I have it. It works after i shutdown the PC / Fury completely... After cold start it works!
With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...
EDIT: fixed, see: https://bitcointalksearch.org/topic/m.3652799
With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...
EDIT: fixed, see: https://bitcointalksearch.org/topic/m.3652799
also did these miner work at windows
with cgminer?
I try it under windows with cgminer 3.8.2 without success, yet.with cgminer?
I get this message: Reset failed! not an Avalon?
Any hints?
Sounds like you need to change the driver with zadig first, I'm not getting any problems running them. Well, mostly anyway.
Still looking for good settings.
for one board you need also the can bus?
also did these miner work at windows
with cgminer?
No, only use the can bus if you have +1 devices.
Jump to: