Pages:
Author

Topic: BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT! - page 4. (Read 20779 times)

member
Activity: 118
Merit: 10
Is this possibly the cause?
According https://blockchain.info dieTransaktion has a waiting time of 76 hours (queue position 3175)
https://blockchain.info/tx/45fd2de71ecb000205c8d17748b2e9a0f900a972b6edccc4804275e81c2d48d2
Because you did not include a transaction fee, your transaction is considered low priority.

There has been a huge surge in transaction traffic over the last few days due to the price volatility. Nodes adding transactions to the blockchain have a finite limit to how many they can/will add; there is no benefit to them in adding 0-fee transactions which is why they often "linger in limbo" for hours. Especially during times of high activity such as now.

The good news is that the longer your transaction stays unverified, the higher its priority will be. Eventually it will be added by someone.

Word of advice: always include a transaction fee, especially if time is of value to you. Fees are a courtesy to the miners on the network; eventually as block rewards drop, transaction fees will become the major source of income for us miners. Don't be a cheapskate and then wonder why no one wants to process your transaction for free.

Thanks for the information!!
But asic-hardware.com would have seen that the amount above is pointed, and I get the confirmation email from asic-hardware.com only when the transaction is completed?

How much is the transaction fee (e.g. 1.6 BTC)?
and afterwards you can add to the transaction, a transaction fee? ^ ^
legendary
Activity: 922
Merit: 1003
Is this possibly the cause?
According https://blockchain.info dieTransaktion has a waiting time of 76 hours (queue position 3175)
https://blockchain.info/tx/45fd2de71ecb000205c8d17748b2e9a0f900a972b6edccc4804275e81c2d48d2
Because you did not include a transaction fee, your transaction is considered low priority.

There has been a huge surge in transaction traffic over the last few days due to the price volatility. Nodes adding transactions to the blockchain have a finite limit to how many they can/will add; there is no benefit to them in adding 0-fee transactions which is why they often "linger in limbo" for hours. Especially during times of high activity such as now.

The good news is that the longer your transaction stays unverified, the higher its priority will be. Eventually it will be added by someone.

Word of advice: always include a transaction fee, especially if time is of value to you. Fees are a courtesy to the miners on the network; eventually as block rewards drop, transaction fees will become the major source of income for us miners. Don't be a cheapskate and then wonder why no one wants to process your transaction for free.
fex
full member
Activity: 145
Merit: 100
Hi all.
I have a question?
Today I ordered a BitBurner Fury, and immediately paid (BTC).
How long does it take to get a confirmation email?

I also did not get a confirmation email after payment (just the "order receipt" before I payed), might be normal. And as far as status on their site goes: mine still shows "Processing", even after the order was delivered.

Having said that, however, if your transaction is not confirmed, (obviously) the payment did not arrive, yet.

Btw: I'm also waiting for a respose.
member
Activity: 118
Merit: 10
Hi all.
I have a question?
Today I ordered a BitBurner Fury, and immediately paid (BTC).
How long does it take to get a confirmation email?
I have transferred the BTC at 7:25, and we have now 18:00.
And until now I have not received confirmation ...

The product was still available when purchasing.

Since ~ 16:30 is:
It looks like this what the result of Either:
a mistyped address
an out-of-date link

thanks for the help in advance

edit:
I've already sent a mail to the support ~ 10:00, and have not received a reply ...

Is this possibly the cause?
According https://blockchain.info dieTransaktion has a waiting time of 76 hours (queue position 3175)

https://blockchain.info/tx/45fd2de71ecb000205c8d17748b2e9a0f900a972b6edccc4804275e81c2d48d2
3ds
full member
Activity: 238
Merit: 100
UPDATE

Major price cut due to BTC rise.

1.5 BTC / board

11.2 BTC / 8 board tower

What's about a special offer for all people who paid shortly before the price cut???
3ds
full member
Activity: 238
Merit: 100
If you have the the firmware that shows the devices as BTB (and not as BBF) then you should add 300mvolts to your intended voltage. So if you want to run them at 1060mvolts, use the following option:

--bitburner-voltage 1360
Yeah... That's it. I need only this options and nothing more so it worked ~50GH/s...

(My devices is shown as BTB)

I didn't understand why this is not explained on asic-hardware.com  Huh
3ds
full member
Activity: 238
Merit: 100
Seems the shop is broken???
member
Activity: 108
Merit: 10


Quote
Bitburner Fury available for order
Shop

It looks like this was the result of either:

    a mistyped address
    an out-of-date link

Perhaps searching can help.

Out of stock aggain ??

Looks like the "Boards" section was taken down.
sr. member
Activity: 274
Merit: 250


Quote
Bitburner Fury available for order
Shop

It looks like this was the result of either:

    a mistyped address
    an out-of-date link

Perhaps searching can help.

Out of stock aggain ??
member
Activity: 108
Merit: 10
Getting that Shipping to Sweden is 75 Bitcoins, that cannot be right? Wanted to buy that 8 board tower.

 Very curious and itching to pull the trigger on the 8-board tower myself, but this thread has raised some questions and concerns I have over RMAs, and the non-guarantee of 48-52GHs. Waiting patiently for answers to a PM sent to cryptx.


Unless you have some serious bad luck, all devices should mine (when configured properly) between 45~55gh/s.

You'll probably be getting one or two with bad usb connectors though.
legendary
Activity: 1652
Merit: 1067
Christian Antkow
Getting that Shipping to Sweden is 75 Bitcoins, that cannot be right? Wanted to buy that 8 board tower.

 Very curious and itching to pull the trigger on the 8-board tower myself, but this thread has raised some questions and concerns I have over RMAs, and the non-guarantee of 48-52GHs. Waiting patiently for answers to a PM sent to cryptx.
full member
Activity: 196
Merit: 100
Getting that Shipping to Sweden is 75 Bitcoins, that cannot be right? Wanted to buy that 8 board tower.
member
Activity: 108
Merit: 10

On the USB port issue:


Oh wow. I wondered if that dot on the box had something to do with it. I've got one board where the usb connector has solder inside it which sucks as I can't flash it.
legendary
Activity: 2408
Merit: 1004
my order is still at processing from yesterday
something is wrong
3ds
full member
Activity: 238
Merit: 100
Everyone who get a board: Please check if there where some dust on the cooler.
Maybe i'm wrong: But for me it seems that the shipped boards are all running for a long time before shipping, isn't it?
fex
full member
Activity: 145
Merit: 100
If you have the the firmware that shows the devices as BTB (and not as BBF) then you should add 300mvolts to your intended voltage. So if you want to run them at 1060mvolts, use the following option:

--bitburner-voltage 1360

(and not bitburner-fury-voltage something..., because that option won't be recognized)

If you want another firmware, check out these posts:
https://bitcointalksearch.org/topic/m.3362916
and:
https://bitcointalksearch.org/topic/m.3364756

Thank you for the pointers, I'll get to it later.

On the USB port issue:
Please note that I did not even buy a stack of miners, but individual ones. Therefore, I expect the USB connectors to work. I need that because I want to use them with different computers (not all are for me).

I'm wondering if they sent me this board on purpose. it's marked with an "x" and a red dot on the packaging - very hard to miss:

 

Did I mention that I payed even more (order on the weekend) than the current price for that? Angry
newbie
Activity: 8
Merit: 0
This is way up there on my watch list. I just picked up a blade, so if either my finances straighten out or I get a decent score mining Ill be back for one of these ASAP.
copper member
Activity: 2310
Merit: 1032
I was reading this thread and did not realized goxed was a user  Grin LOL

Sorry goxed, Seen comments like "maybe goxed knows" and assumed it was a play on words.

Squall1066 out
newbie
Activity: 25
Merit: 0
I have two boards due Thursday. I was figuring on using the USB ports, and thus didn't order the CANBUS cable. Should I have issues with USB ports, is there a place I can purchase appropriate cabling (that won't require another international shipment to USA)?
member
Activity: 97
Merit: 10
Okay so there are some chips which have Beta printed on them and there are some chips with Bioinfobank printed on them. Some people claim that the chips which have Beta printed on them have slightly better quality.

Good to know. Thanks. Now I'm curious to see what is printed on my BitFury chips on my Belgian boards.
Pages:
Jump to: