BITMAIN Antminer S1 support and OverClocking thread - page 22.

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: romeoz on February 19, 2014, 09:17:27 PM

Quote from: bronan on February 17, 2014, 04:31:47 PM

I got a problem when i was rearranging the antminers to get better airflow one of the small parts fell off
Sadly it looks like it never was soldered firm on the board
I have not even touch those at all i was just replacing the ant thats all
Can i solder it myself or do i risk damaging some nearby part if i do.
I only have a simple small solder tool which i used when i made my own flip flop boards back in the previous century

Or do i need to contact bitmain to replace it ?

https://www.dropbox.com/sh/0gji2e3esl9wqlr/p4YfvMrtN4

Mine did the same thing. I soldered it back on and everything worked perfect. :-)

Its an easy fix at any electronics place. going somewhere that does cellphone repairs of PS3/xbox modding will help you find someone with the precision soldering skills to fix it up fast, as long as there are still contacts on the capacitor.

Unless you are VERY good with a soldering gun, take it to someone who is. Its not worth botching a $10 job and wrecking your antminer totally

tuner

member

Activity: 73

Merit: 10

I had put miners in conditioned datacenter, now I get
0.16 HW errors on older rev. @400mhz
and 0.07 HW errors on newer rev. @400mhz

temperatures on both miners approx. 28C

I think I will try to test overclock them a little more next week

romeoz

newbie

Activity: 14

Merit: 0

Quote from: bronan on February 17, 2014, 04:31:47 PM

I got a problem when i was rearranging the antminers to get better airflow one of the small parts fell off
Sadly it looks like it never was soldered firm on the board
I have not even touch those at all i was just replacing the ant thats all
Can i solder it myself or do i risk damaging some nearby part if i do.
I only have a simple small solder tool which i used when i made my own flip flop boards back in the previous century

Or do i need to contact bitmain to replace it ?

https://www.dropbox.com/sh/0gji2e3esl9wqlr/p4YfvMrtN4

Mine did the same thing. I soldered it back on and everything worked perfect. :-)

thecr4ne

newbie

Activity: 27

Merit: 0

Quote from: Slesh on February 19, 2014, 02:58:24 AM

Hi

Can someone help me with this issue?
Today I got 3 Antiminers S1 (I already use 4 pcs. - so I am not so newbie in setting

).
Two of them are hashing perfect. Third one works strange. Web admin works good, but is not hashing.
Green light on the side is shining (not blinking) for about 1 or 2 minutes than stops.
CGMiner tries to start but cannnot.
Power supply works on other machine perfect, so PSU is not the cause.
All setting are the same like on onther six pcs. (only IP changed)..Connected to Eligius so cgminer setting same on every machine.
Did anybody solve something like this ?

thanks for any help.

One of mine does that occasionally when I reboot it. I've found that going to System>Startup and restarting some of the processes seems to get it to click. I usually just restart "network" then "cgminer". Doesn't get to the heart of the problem, but it gets me up and running.

samsonn25

hero member

Activity: 882

Merit: 1003

Quote from: sshapiroNJ on February 19, 2014, 01:23:57 PM

Can I set a fixed IP address on the WAN interface of my Antminer?

Yes, alot of people do this

sshapiroNJ

newbie

Activity: 55

Merit: 0

Can I set a fixed IP address on the WAN interface of my Antminer?

freebit13

hero member

Activity: 616

Merit: 500

I got Satoshi's avatar!

Quote from: tuner on February 19, 2014, 07:10:11 AM

I'm using corsair CX750M for each miner
getting 0.3% HW errors on 2013-12 rev. board
and 0.15% HW errors on 2014-01 rev. board

they look a little different too. Same order but received different rev. boards

PS. no HW errors on both when running on 375MHz

Quote from: freebit13 on February 19, 2014, 06:57:49 AM

Quote from: tuner on February 19, 2014, 05:43:17 AM

If someone is interested, i just measured how much overclocked s1 power is using.
OC'd to 400Mhz, 203GHs

What PSU are you using?

So, that would leave the ant pulling around 375W@400mhz, regardless of psu.

Yeah, there can be quite a difference between boards... they have changed the caps on the 2014 boards and they seem to run a lot more stable than the older ones.

tuner

member

Activity: 73

Merit: 10

I'm using corsair CX750M for each miner
getting 0.3% HW errors on 2013-12 rev. board
and 0.15% HW errors on 2014-01 rev. board

they look a little different too. Same order but received different rev. boards

PS. no HW errors on both when running on 375MHz

Quote from: freebit13 on February 19, 2014, 06:57:49 AM

Quote from: tuner on February 19, 2014, 05:43:17 AM

If someone is interested, i just measured how much overclocked s1 power is using.
OC'd to 400Mhz, 203GHs

What PSU are you using?

freebit13

hero member

Activity: 616

Merit: 500

I got Satoshi's avatar!

Quote from: tuner on February 19, 2014, 05:43:17 AM

If someone is interested, i just measured how much overclocked s1 power is using.
OC'd to 400Mhz, 203GHs

What PSU are you using?

tuner

member

Activity: 73

Merit: 10

If someone is interested, i just measured how much overclocked s1 power is using.
OC'd to 400Mhz, 203GHs

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: Slesh on February 19, 2014, 02:58:24 AM

Hi

Can someone help me with this issue?
Today I got 3 Antiminers S1 (I already use 4 pcs. - so I am not so newbie in setting

).
Two of them are hashing perfect. Third one works strange. Web admin works good, but is not hashing.
Green light on the side is shining (not blinking) for about 1 or 2 minutes than stops.
CGMiner tries to start but cannnot.
Power supply works on other machine perfect, so PSU is not the cause.
All setting are the same like on onther six pcs. (only IP changed)..Connected to Eligius so cgminer setting same on every machine.
Did anybody solve something like this ?

thanks for any help.

find the logs on the webgui - they will help.

is there perhaps an ip conflict between it and another miner or device?

Slesh

member

Activity: 103

Merit: 10

Hi

Can someone help me with this issue?
Today I got 3 Antiminers S1 (I already use 4 pcs. - so I am not so newbie in setting

).
Two of them are hashing perfect. Third one works strange. Web admin works good, but is not hashing.
Green light on the side is shining (not blinking) for about 1 or 2 minutes than stops.
CGMiner tries to start but cannnot.
Power supply works on other machine perfect, so PSU is not the cause.
All setting are the same like on onther six pcs. (only IP changed)..Connected to Eligius so cgminer setting same on every machine.
Did anybody solve something like this ?

thanks for any help.

thecr4ne

newbie

Activity: 27

Merit: 0

I got my third S1 yesterday (thanks ninjatech.org) and as of about 5 minutes ago have all three running at 400MHz all powered by a single 1200W Thermaltake TPG-1200M PSU.

The PCI 12V rail will do 85 Amps, but all three at 400MHz were overloading it. I had them all running stable with 2 at 387.5MHz, and one at 375MHz. I ended up adapting the 12V CPU lines to connect to the PCI connectors so the third would pull from the other 12V rail.

I'll keep an eye on them but so far things look stable.

lostering

newbie

Activity: 38

Merit: 0

Quote from: bronan on February 18, 2014, 02:34:24 AM

Just keep an eye on the Hw errrors as long as it stays well below a certain % your fine
Most people who overclock keep it below 5% , i am more picky and wanna see less the 2.5 % hw errors
most are clocked at 375 or 387.5 and 1 is clocked at 393 since a few days

Thanks for the info. I didn't reach 200GHs til I oc to 393

mindtrip

legendary

Activity: 1167

Merit: 1009

I have my Ant Over Clocked with 375 Mhz Running really reliable and strong

11 hours running Average is 190GH Only 6 Total HW errors I am had tried 400 and got it up over 200GH but way to many hardware errors for my liking I may try a few of the in between settings to try and get it closer to 200GH with less than 1% HW errors I am thinking the 387 setting ill try next

freebit13

hero member

Activity: 616

Merit: 500

I got Satoshi's avatar!

Quote from: bronan on February 17, 2014, 06:32:05 PM

I have disconnected the broken board from the miner so i guess i can still run the remaining board
That way i loose less mining power, waiting for them to asnwer

I've broken caps off my miner by dropping it and instead of losing time replacing it, I just took it to my local pc store and the guy there fixed it for about $10. I was going to try it myself but it's really precise work.

If the caps still have the legs on them you should be able to get someone local to just solder them back on... mine all broke off pretty neatly.

bronan

hero member

Activity: 774

Merit: 500

Lazy Lurker Reads Alot

Just keep an eye on the Hw errrors as long as it stays well below a certain % your fine
Most people who overclock keep it below 5% , i am more picky and wanna see less the 2.5 % hw errors
most are clocked at 375 or 387.5 and 1 is clocked at 393 since a few days

lostering

newbie

Activity: 38

Merit: 0

Quote from: Swimmer63 on February 17, 2014, 11:29:16 PM

Quote from: lostering on February 17, 2014, 11:20:46 PM

My ant says I have avg 195GHs, but BTCguild only shows 150GHs. They were about the same before I overclock. What is the problem? Any body has any idea? Huh

Give it an hour or two. It will catch up. Mine has done that too.

Thanks, I was worried. It is catching up now.

Anyway, My ant run OCed 195GHs, freq 387, my temperature is 43/48 with 2 fans running around 2000RPM, Error rate 1.5%. Should I just keep it going like this, ??( The temperature before OC was pretty much the same.)

southerngentuk

sr. member

Activity: 1316

Merit: 254

Sugars.zone | DatingFi - Earn for Posting

Quote from: Swimmer63 on February 17, 2014, 03:26:00 PM

Just received my latest Antminer and I'm baffled. I don't know linux but I have overclocked a dozen of these over the past few months thanks to this thread.
But this one I can't figure out. When I key in "vim /asic-freq/
All I get is this:

Any idea how I get to the point where I can modify the file?

Ha ha, lol I did the same Cheesy

Then I downloaded and installed nano from the software menu on the ant ( dead easy), I am more comfortable with nano Wink

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: lostering on February 17, 2014, 11:20:46 PM

My ant says I have avg 195GHs, but BTCguild only shows 150GHs. They were about the same before I overclock. What is the problem? Any body has any idea? Huh

Give it an hour or two. It will catch up. Mine has done that too.

Topic: BITMAIN Antminer S1 support and OverClocking thread - page 22. (Read 144941 times)