Received mine today, have it mining on Ethermine, no real issues other than it does not show a reported hashrate. The miner is showing around 193 MH average, and it shows an actual hashrate on ethermine, just no reported hashrate. Just curious if this is normal for the Antminer?
noticed the same but payouts are happening so I ignored it 
Topic: Bitmain E3 Ethash Miner ASIC (Shipping:16-31 July. $800 USD) - page 7. (Read 16407 times)
i've always experienced a mean average of what my miner hashrate reports..
havent mined on ethermine for ages though.
be careful of what mining software you use.
havent mined on ethermine for ages though.
be careful of what mining software you use.
Received mine today, have it mining on Ethermine, no real issues other than it does not show a reported hashrate. The miner is showing around 193 MH average, and it shows an actual hashrate on ethermine, just no reported hashrate. Just curious if this is normal for the Antminer?
So what is the consensus on the E3? Is it hashing as advertised? Is it stable? How are the temps? Any particular pools that don't work? Anyone had any experience setting one up on Mining Rig Rentals yet? Thanks.
I have 1 E3 configured for antpool and 1 for nanopool. They've both been running ~24 hours with tons of accepted shares which makes me feel like they're configured properly, however, neither of them are showing up in the pools. It's a bit disconcerting. If anyone could shed some light, it would be greatly appreciated.
Thanks a lot for the pictures, I was really curious about it
Seems on this version they didn't manage to out the whole architecture in one chip like they do with sha256 hardware for example
Seems on this version they didn't manage to out the whole architecture in one chip like they do with sha256 hardware for example
No insides photos of this thing yet?
Knock yourself out
Just received an hour ago.
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Hi, is it showing on your dashboard at the website of viabtc?
I have used the following settings and it is not showing:
URL : stratum+tcp://ethereum.viabtc.com:3333
User:
Password:
What could i be doing wrong?
The miner is showing it is hashing, but nothing is updating on the viabtc website.
Yeah. showing on viabtc dashboard
username: your viabtc username
pass: any
Wait 10 mins and you should see your machine online in viabtc and hashing.
However, viabtc was unable to recognise the worker name which i have set (username.001). It is just showing random numbers for the worker name. Well, at least it's mining.
Yeah, finally it is showing, and ditto, i have some random numbers being shown as well.
No insides photos of this thing yet?
Just received an hour ago.
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Hi, is it showing on your dashboard at the website of viabtc?
I have used the following settings and it is not showing:
URL : stratum+tcp://ethereum.viabtc.com:3333
User:
Password:
What could i be doing wrong?
The miner is showing it is hashing, but nothing is updating on the viabtc website.
Yeah. showing on viabtc dashboard
username: your viabtc username
pass: any
Wait 10 mins and you should see your machine online in viabtc and hashing.
However, viabtc was unable to recognise the worker name which i have set (username.001). It is just showing random numbers for the worker name. Well, at least it's mining.
Was able to pick em up today and already hashing away. I didnt have to wait long for them to start (after I been reading some peeps have had to wait some time before they kick in)
Kinda annoying I cant control the fans, its farrrrking freezing here and be nice to turn them low - as it doesnt need much - 2500 rpm is more than enough but its doing its 3500rpm spin and then down to 1500 then back up after a few mins type shit. Basically silent to - gee thats gunna be annoying after a while (but no where near the 76dbs advertised - the l3+s are still louder and they are in boxes)
Other then that - decided to mine up some ETC instead for now.
Edit - its silent at 1800rpm (with all things considered)
Jul 4 2018 firmware - and zero HW errors to date - not even 1 for funsies
No setup options.
Kinda annoying I cant control the fans, its farrrrking freezing here and be nice to turn them low - as it doesnt need much - 2500 rpm is more than enough but its doing its 3500rpm spin and then down to 1500 then back up after a few mins type shit. Basically silent to - gee thats gunna be annoying after a while (but no where near the 76dbs advertised - the l3+s are still louder and they are in boxes)
Other then that - decided to mine up some ETC instead for now.
Edit - its silent at 1800rpm (with all things considered)
Jul 4 2018 firmware - and zero HW errors to date - not even 1 for funsies
No setup options.
Just received an hour ago.
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Hi, is it showing on your dashboard at the website of viabtc?
I have used the following settings and it is not showing:
URL : stratum+tcp://ethereum.viabtc.com:3333
User:
Password:
What could i be doing wrong?
The miner is showing it is hashing, but nothing is updating on the viabtc website.
URL : stratum+tcp://ethereum.viabtc.com:3333
User: your-via-account-username ( mike01.01 )
Password: i left it blank
I tried doing that, but I don't know why it is adding random numbers at the end. For example the user is #
Just received an hour ago.
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Hi, is it showing on your dashboard at the website of viabtc?
I have used the following settings and it is not showing:
URL : stratum+tcp://ethereum.viabtc.com:3333
User:
Password:
What could i be doing wrong?
The miner is showing it is hashing, but nothing is updating on the viabtc website.
URL : stratum+tcp://ethereum.viabtc.com:3333
User: your-via-account-username ( mike01.01 )
Password: i left it blank
Just received an hour ago.
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Hi, is it showing on your dashboard at the website of viabtc?
I have used the following settings and it is not showing:
URL : stratum+tcp://ethereum.viabtc.com:3333
User:
Password:
What could i be doing wrong?
The miner is showing it is hashing, but nothing is updating on the viabtc website.
Did Anyone test it with ethermine??
Exactly. The coinwarz eth difficulty chart is much more accurate and gives you a better picture of what is actually happening right now. I'm actually surprised that ETH difficulty hasnt skyrocketed yet. It's probably because bitmain already turned on these E3 ASICs months ago.
They would have to ship more than 100 THOUSAND miners to move the difficulty by 10%. Even for Bitmain that's a lot of miners. The E3 is not going to have an impact on that chart anytime soon.
Just received an hour ago.
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
Mining on viabtc without issue
http://oi65.tinypic.com/mr6b7q.jpg
So far so good!
found it finally
https://www.antpool.com/eth.htm?wallet=
https://www.antpool.com/eth.htm?wallet=
I am on
stratum-eth.antpool.com:8008
stratum-eth.antpool.com:8008
Jump to: