Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 79. (Read 299686 times)
November 08, 2017, 06:29:48 PM
once these things are setup, is there much maintenance needed?
November 08, 2017, 05:19:06 PM
Which pool do you recommend? It's so odd that some calculators show -$10/month for me, and some show $150/profit month.
I still use granatgas-pool and it was good to me, my 2nd choice is nicehash
Thank you I have joined your pool
. Can you tell me what command you enter into D3? I'm a little confused. I put below but I don't know if it's optimal.-o stratum+tcp://stratum-us.granatgas-pool.info:1111#xnsub -u
URL: stratum+tcp://stratum-us.granatgas-pool.info:1111
WORKER: WALLET_ADDRESS
PASSWORD: c=DASH,d=16
Thank you! I'm getting about $6.50/day it appears.
Sounds about right.
November 08, 2017, 05:14:08 PM
Batch 21st-30th - on the way...
They can't wait to get those popcorn machines out the door!! LOL November 08, 2017, 05:07:35 PM
Batch 21st-30th - on the way...
November 08, 2017, 05:00:28 PM
Which pool do you recommend? It's so odd that some calculators show -$10/month for me, and some show $150/profit month.
I still use granatgas-pool and it was good to me, my 2nd choice is nicehash
Thank you I have joined your pool
. Can you tell me what command you enter into D3? I'm a little confused. I put below but I don't know if it's optimal.-o stratum+tcp://stratum-us.granatgas-pool.info:1111#xnsub -u
URL: stratum+tcp://stratum-us.granatgas-pool.info:1111
WORKER: WALLET_ADDRESS
PASSWORD: c=DASH,d=16
Thank you! I'm getting about $6.50/day it appears.
November 08, 2017, 04:24:42 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol
Can you elaborate, at least ballpark? Still waiting on my three D3s coming in the end of November batch and curious about the real-world profitability.
I earns around 6-7 $/day per machine before electricity
November 08, 2017, 04:22:16 PM
Which pool do you recommend? It's so odd that some calculators show -$10/month for me, and some show $150/profit month.
I still use granatgas-pool and it was good to me, my 2nd choice is nicehash
Thank you I have joined your pool
. Can you tell me what command you enter into D3? I'm a little confused. I put below but I don't know if it's optimal.-o stratum+tcp://stratum-us.granatgas-pool.info:1111#xnsub -u
URL: stratum+tcp://stratum-us.granatgas-pool.info:1111
WORKER: WALLET_ADDRESS
PASSWORD: c=DASH,d=16
November 08, 2017, 04:21:23 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol
Can you elaborate, at least ballpark? Still waiting on my three D3s coming in the end of November batch and curious about the real-world profitability.
November 08, 2017, 04:10:32 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol
It's been 24 hours for me too! What pool are you using?
November 08, 2017, 04:05:16 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!only been mining with my 2 D3 for 24 hours and i will say profit is way more than $2 a day. lol
November 08, 2017, 03:52:16 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
is 50 percent safe?
how did you lower fan speed?
Temp(PCB) heat more then 85 will turn off the miner
I'm glad to know there's a safety switch (so to speak) - so my PCB Temps of 64 should be just fine. ?
November 08, 2017, 03:49:17 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
is 50 percent safe?
how did you lower fan speed?
D3 miner will stop running when the Temp(PCB) exceeds to 85°C, there will be an error message “Fatal Error: Temperature is too high!” shown in the bottom of kernel log page.
November 08, 2017, 03:48:06 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
is 50 percent safe?
how did you lower fan speed?
In the "Miner General Configuration" (http://172.20.1.34/cgi-bin/minerConfiguration.cgi)
I set the "Customize the fan speed percentage" to 50
I've done this on all my S7s and it makes them very reasonable (sound wise).
November 08, 2017, 03:44:07 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
is 50 percent safe?
how did you lower fan speed?
November 08, 2017, 03:40:01 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast!Well, yes, happy to have received it - of course, it would have been nice to get it months ago when I ordered it.
And, $5/day profit at the current price... but did you foresee BTC cresting over 7k as it has? Seems like you dislike Dash (or D3?) why are you hanging around this thread? November 08, 2017, 03:23:55 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
is 50 percent safe?
I'm guessing you're questioning the temps? The Temp (PCB) averages 64 and the Temp(Chip) about 83. Since I'm new, I'm just assuming that's an OK range?
Elapsed MH/S(RT) MH/S(avg) FoundBlocks LocalWork Utility WU BestShare
8h39m47s 18,810.0 19,332.69 0 182,389 5.45 273.67 57303
Chain# ASIC# Frequency MH/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1 60 537 6291.87 0 65 83 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
2 60 537 6301.11 0 63 81 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3 60 537 6217.02 5 64 84 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
Speed (r/min) 3,750 3,780
November 08, 2017, 03:19:21 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Sounds like a happy man to have a received a D3 miner capable of doing 20MH/s AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
Have you checked whattomine.com recently? Hate to break it to you, but your profit is $2 a day and heading down fast! November 08, 2017, 03:18:39 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
is 50 percent safe?
November 08, 2017, 02:48:07 PM
He actually mean't that those HP server power supplies are quite loud at 100% load, which is true.
I have a couple HP 2450W power supplies now. If you get them near max they whine!! Using them to power 2 L3+'s and they aren't bad.
November 08, 2017, 02:34:37 PM
He actually mean't that those HP server power supplies are quite loud at 100% load, which is true.
Got it. I meant D3 itself.
Jump to: