Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 80. (Read 299686 times)
November 08, 2017, 02:33:01 PM
He actually mean't that those HP server power supplies are quite loud at 100% load, which is true.
November 08, 2017, 02:32:10 PM
Server grade power supplies can handle the 100% load.
ATX power supplies can't.
ATX power supplies can't.
That is probably valid. Regardless, these PSUs in particular sound like jet engines at 100% load. (That may be okay for some situations.)
M
I never tried APW3++ at 100% but when I tried at 80% the sound already was like jet engine, I imagine when it's at 100%
November 08, 2017, 02:29:20 PM
Server grade power supplies can handle the 100% load.
ATX power supplies can't.
ATX power supplies can't.
That is probably valid. Regardless, these PSUs in particular sound like jet engines at 100% load. (That may be okay for some situations.)
M
November 08, 2017, 02:24:19 PM
PM 1200 watt is perfect for 1
https://www.parallelminer.com/product/hp-94-platinum-server-1200-watt-200-240v-power-supply-kit-for-antminer-s3-s5-d3-l3/?wpam_id=27
PM 2400 watt is perfect for 2 (need 220/240v)
https://www.parallelminer.com/product/power-supply-kit-for-2-antminer-d3-dash-miners-94-platinum-high-efficiency-200-240v/?wpam_id=27
https://www.parallelminer.com/product/hp-94-platinum-server-1200-watt-200-240v-power-supply-kit-for-antminer-s3-s5-d3-l3/?wpam_id=27
PM 2400 watt is perfect for 2 (need 220/240v)
https://www.parallelminer.com/product/power-supply-kit-for-2-antminer-d3-dash-miners-94-platinum-high-efficiency-200-240v/?wpam_id=27
I disagree. I think you're asking for trouble running the PSU at 100% or more than 100%.
The D3 uses 1200W "at the wall", right?
From my experience running the 2400w PSU at 100% may work for a short bit, however the PSU will scream like a jet engine the entire time.
What you could do is use three PSUs to power two units. Just make sure you don't mix and match power sources to each hash board.
M
November 08, 2017, 02:16:44 PM
Server grade power supplies can handle the 100% load.
ATX power supplies can't.
ATX power supplies can't.
November 08, 2017, 02:13:54 PM
1st batch uses around 1000W at the wall.
In that case, yes, 1200W is perfect.
M
November 08, 2017, 02:13:05 PM
PM 1200 watt is perfect for 1
https://www.parallelminer.com/product/hp-94-platinum-server-1200-watt-200-240v-power-supply-kit-for-antminer-s3-s5-d3-l3/?wpam_id=27
PM 2400 watt is perfect for 2 (need 220/240v)
https://www.parallelminer.com/product/power-supply-kit-for-2-antminer-d3-dash-miners-94-platinum-high-efficiency-200-240v/?wpam_id=27
https://www.parallelminer.com/product/hp-94-platinum-server-1200-watt-200-240v-power-supply-kit-for-antminer-s3-s5-d3-l3/?wpam_id=27
PM 2400 watt is perfect for 2 (need 220/240v)
https://www.parallelminer.com/product/power-supply-kit-for-2-antminer-d3-dash-miners-94-platinum-high-efficiency-200-240v/?wpam_id=27
I disagree. I think you're asking for trouble running the PSU at 100% or more than 100%.
The D3 uses 1200W "at the wall", right?
From my experience running the 2400w PSU at 100% may work for a short bit, however the PSU will scream like a jet engine the entire time.
What you could do is use three PSUs to power two units. Just make sure you don't mix and match power sources to each hash board.
M
1st batch uses around 1000W at the wall.
November 08, 2017, 02:11:55 PM
I just received my first D3 - I was shocked to see 20GHz average! AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!)
Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
AND very happily surprised to see that I had the option to control the fan speed! (50% works perfectly and is much less noisy than the auto-tune S9!) Just wanted to say "hi" to the thread... I'm sure I'll have a ton of questions. (i.e., pool questions / firmware / etc.)
November 08, 2017, 02:09:44 PM
PM 1200 watt is perfect for 1
https://www.parallelminer.com/product/hp-94-platinum-server-1200-watt-200-240v-power-supply-kit-for-antminer-s3-s5-d3-l3/?wpam_id=27
PM 2400 watt is perfect for 2 (need 220/240v)
https://www.parallelminer.com/product/power-supply-kit-for-2-antminer-d3-dash-miners-94-platinum-high-efficiency-200-240v/?wpam_id=27
https://www.parallelminer.com/product/hp-94-platinum-server-1200-watt-200-240v-power-supply-kit-for-antminer-s3-s5-d3-l3/?wpam_id=27
PM 2400 watt is perfect for 2 (need 220/240v)
https://www.parallelminer.com/product/power-supply-kit-for-2-antminer-d3-dash-miners-94-platinum-high-efficiency-200-240v/?wpam_id=27
I disagree. I think you're asking for trouble running the PSU at 100% or more than 100%.
The D3 uses 1200W "at the wall", right?
From my experience running the 2400w PSU at 100% may work for a short bit, however the PSU will scream like a jet engine the entire time.
What you could do is use three PSUs to power two units. Just make sure you don't mix and match power sources to each hash board.
M
November 08, 2017, 01:55:54 PM
Just got confirmation of shipping for 21-30 batch but not on all orders 
Seems like power supplies aren't included, invoice shows 25 KG but Tracking just 15 KG
I switched to team parallel miner over supporting even more of bitmain product (buying their miner AND psu) Seems like power supplies aren't included, invoice shows 25 KG but Tracking just 15 KG
I'd say I can't believe bitmain is shipping miners without their attached PSU orders but then again it's bitmain so I absolutely can lol //Searing chime in with some funny evil bitmain quotes xD
PM 1200 watt is perfect for 1
https://www.parallelminer.com/product/hp-94-platinum-server-1200-watt-200-240v-power-supply-kit-for-antminer-s3-s5-d3-l3/?wpam_id=27
PM 2400 watt is perfect for 2 (need 220/240v)
https://www.parallelminer.com/product/power-supply-kit-for-2-antminer-d3-dash-miners-94-platinum-high-efficiency-200-240v/?wpam_id=27
November 08, 2017, 01:53:55 PM
Is there a way to turn down the fans on these things so I can test it at home? It's super loud.
Under settings page, you can set fan percentage.
November 08, 2017, 01:49:23 PM
Is there a way to turn down the fans on these things so I can test it at home? It's super loud.
November 08, 2017, 01:34:16 PM
Which pool do you recommend? It's so odd that some calculators show -$10/month for me, and some show $150/profit month.
I still use granatgas-pool and it was good to me, my 2nd choice is nicehash
November 08, 2017, 01:32:42 PM
can anybody explain why difficulty jumps so vigorously? From 20 mln to 52 mln, than back to 20 and up to 27 (at the moment) ?
I could understand similar situation for Bitcoin, because some miners may continuously be switching between the most profitable coins (BTC->BCH etc.), but with X11 this can't be so, because there is no more interesting coin than Dash [now].
I could understand similar situation for Bitcoin, because some miners may continuously be switching between the most profitable coins (BTC->BCH etc.), but with X11 this can't be so, because there is no more interesting coin than Dash [now].
November 08, 2017, 01:20:27 PM
Just got confirmation of shipping for 21-30 batch but not on all orders
Seems like power supplies aren't included, invoice shows 25 KG but Tracking just 15 KG
Seems like power supplies aren't included, invoice shows 25 KG but Tracking just 15 KG
What was the date you ordered? Mine still waiting
same here. 21-30 nov. batch and still unshipped
November 08, 2017, 11:37:12 AM
There is a new firmware for D3.
Someone has test it : https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E
?
Someone has test it : https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E
?
firmware version?
Are there copies of the OLDER firmware someplace (or anyone?) you know how it works..you upgrade to NEW firmware on an asic miner
and we're better off with the previous version....
just asking ...will likely have this done...but wondering on fall back if needed
I currently have the September 13 and November 2 firmwares downloaded to my computer hard drive.
edit:
I uploaded them in my Mega cloud, in case somebody needs these.
September 13, 2017 firmware: https://mega.nz/#!s49E3A4K!PjeBEtZFdMflKe95gAtqBJRgCR7wyNIp-fCpI_8Qs9w
November 2, 2017 firmware (the newest version at the moment): https://mega.nz/#!ckkQhAzJ!jdTQEbkik-yQpEh9_aNdAoxper-didEqglKsWIaiZAg
that was quick ..thanks ..will see if I can grab them....(again paranoia is how I slide thru life)
New firmware is doing alright for me
Getting faster speeds out of it. My latest D3 is getting 20.345gh/s
Nice to know you are getting 20.345gh/s, Whats is the hash rate written on the miner you have?
it's a 19gh/s model 20.2gh/s right now
other is 19.98gh/s and 19.6gh/s
November 08, 2017, 11:29:58 AM
Just got confirmation of shipping for 21-30 batch but not on all orders
Seems like power supplies aren't included, invoice shows 25 KG but Tracking just 15 KG
Seems like power supplies aren't included, invoice shows 25 KG but Tracking just 15 KG
What was the date you ordered? Mine still waiting
November 08, 2017, 10:04:02 AM
We should join and charge Bitmain and Dash, they need to change the Dash difficulty algorithm, as happened with ETH, I see many comments that Bitmain is a leech of money, complain in the forum has no result, we fill their mailboxes, we buy mining , but above all we are investors of the company Bitmain and we must be respected.
what does bitmain have to do with dash? lol
if we menage to do it like ETH then we would mine 8 usd/day instead of 4 usd/day by end of November and this before electricity bills not big change
only thing we can do is to support dash it will be more effective
November 08, 2017, 09:55:06 AM
There is a new firmware for D3.
Someone has test it : https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E
?
Someone has test it : https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E
?
firmware version?
Are there copies of the OLDER firmware someplace (or anyone?) you know how it works..you upgrade to NEW firmware on an asic miner
and we're better off with the previous version....
just asking ...will likely have this done...but wondering on fall back if needed
I currently have the September 13 and November 2 firmwares downloaded to my computer hard drive.
edit:
I uploaded them in my Mega cloud, in case somebody needs these.
September 13, 2017 firmware: https://mega.nz/#!s49E3A4K!PjeBEtZFdMflKe95gAtqBJRgCR7wyNIp-fCpI_8Qs9w
November 2, 2017 firmware (the newest version at the moment): https://mega.nz/#!ckkQhAzJ!jdTQEbkik-yQpEh9_aNdAoxper-didEqglKsWIaiZAg
that was quick ..thanks ..will see if I can grab them....(again paranoia is how I slide thru life)
New firmware is doing alright for me
Getting faster speeds out of it. My latest D3 is getting 20.345gh/s
Nice to know you are getting 20.345gh/s, Whats is the hash rate written on the miner you have?
November 08, 2017, 09:36:24 AM
We should join and charge Bitmain and Dash, they need to change the Dash difficulty algorithm, as happened with ETH, I see many comments that Bitmain is a leech of money, complain in the forum has no result, we fill their mailboxes, we buy mining , but above all we are investors of the company Bitmain and we must be respected.
Jump to: