★★★★ [CAIx] ★ First 100% PoS At Launch ★ PSP ★★★★ - page 190.

MasterCATZ

full member

Activity: 426

Merit: 100

Quote from: sakr on March 30, 2014, 10:39:04 AM

CAI first p2pool

Please point your miners here:

http://thepool.pw:2888

and use your CAI address as username

for example -o http://thepool.pw:2888 -u CLbV9kZZG5...

you will receive payments directly to your address!

First block in, payments received, join us now!

Thanks

Lets NOT have the same 51%+ with Nitro
like UTC had
use p2p instead

I honestly have no idea why Nitro did not run a p2p pool this time around ...

Wirly

full member

Activity: 136

Merit: 100

Quote from: azerbaidjan on April 01, 2014, 01:36:06 PM

Quote from: TheStuhlman on April 01, 2014, 10:10:39 AM

Quote from: azerbaidjan on April 01, 2014, 09:58:55 AM

Quote from: Ignition75 on April 01, 2014, 09:55:20 AM

Quote from: azerbaidjan on April 01, 2014, 09:46:14 AM

Quote from: Rabbit80 on April 01, 2014, 09:36:43 AM

Quote from: azerbaidjan on April 01, 2014, 04:46:35 AM

Hi there,

Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.

Many thanks to whomever helps me out & take care.
az.

How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..

Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...

Thanks y'all for your help.

This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.

I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.

This could be a simple config error sometimes they are hard to spot. please post your config.

thanks for your help; here's my current config:

Quote

"failover-only" : true,
"scrypt-vert" : true,

"intensity" : "17",
"vectors" : "2",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "28200",

"expiry" : "120",
"gpu-threads" : "1",
"no-submit-stale" : true,

"scan-time" : "10",
"log" : "5",
"queue" : "1",

"gpu-engine" : "875",
"gpu-fan" : "100",
"gpu-memclock" : "1500",
"gpu-powertune" : "10",

"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"temp-hysteresis" : "3"

I would lose the tc settings and use the --shaders xxxx (whatever shaders your cards have) switch available in 0.5.3 and let vertminer config its own thread concurrency. It works well. Then after things are tweeked and stable you can hard code it. I also had to start with a low Intensity and then increase it after the first time I ran it, maybe try I 13 to start. I had problems at first also, after I did this everything fine. Also if I switch between scrypt-cacha to scrypt-n or back again my miners crash and need reboot, everytime...so maybe try a reboot before switching, seems to be just the way it is for me. Also I not sure why people use the vectors switch, I don't think vectors are used with any scrypt algo.

Namun N

newbie

Activity: 41

Merit: 0

CAI.HASHING.AT

http://cai.hashing.at/

Lightning fast servers!

Only 1% fee. Payments are sent every 5 minutes.

PPLNS - STRATUM - VARDIFF

You can register here anytime or if you already have an account with us, create your workers.

https://farm3.staticflickr.com/2887/13479226424_5291a65d08_o.jpg

the screenshot is not recent - it was taken a couple of minutes after the launch

sakr

sr. member

Activity: 364

Merit: 250

Quote from: azerbaidjan on April 01, 2014, 04:37:45 PM

Quote from: sakr on April 01, 2014, 04:13:42 PM

Quote from: azerbaidjan on April 01, 2014, 03:33:52 PM

Yep, and difficulty may not rise too fast if people cannot mine this thing.
well done

Try completely uninstalling AMD drivers, then installing again, might fix your issues!

ScryptN is easier to mine than scrypt-chacha (aka jane)!

Well, If I can mine Scrypt-Jane with it, why couldn't I mine this easier NScrypt thing then?
I fail to see the logic. You'll have to excuse me for not believing in the traditional way of doing windows business that goes by rebooting and reinstalling everything forever.

Post your config, or screenshots, I cannot believe you have errors with this, while you have been mining UTC, with all Nfactor changes and HW errors pain!

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: azerbaidjan on April 01, 2014, 04:41:01 PM

Quote from: Ignition75 on April 01, 2014, 03:41:46 PM

Quote from: azerbaidjan on April 01, 2014, 03:33:52 PM

Quote from: Ignition75 on April 01, 2014, 03:05:57 PM

Quote from: cryptonator on April 01, 2014, 02:51:41 PM

Quote from: fireinyourhole on April 01, 2014, 12:27:17 PM

Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.

Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.

I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners

Lol... 0.000253 is my breakeven point... it is the same for me to buy at or lower than 0.000253 compare to mining...
And yea... this is my first post and first time mining n trading brand spanking new coin...

Hoping for more miners to come in n price may go up... big exchanges will be very good too ;p

At launch, I worked out the price to be .00083, diff was up. Then as diff went down I started lowering my price and it was upsetting people lol. What me worry, I'm happy to hold on a price that's representative of current difficulty x 10 Grin

Yep, and difficulty may not rise too fast if people cannot mine this thing.
well done

You're the only one having problems mining, stop being a cry baby and learn how to configure your hardware properly...

Thanks for your contribution dad. I can see you have enough miners so I'm going to mine something else.
You should have told straight ahead that you were not interested in people having trouble to setup their rig, that would have spared the time.

Post up your exact error message, the settings you have are a bit soft for a 290x but it should run fine. You've got something system related that's causing the problem. Or, copy the directory you are using for one of your working Scrypt-N coins and just change the connect settings. There is absolutely nothing wrong with the coin...

azerbaidjan

member

Activity: 98

Merit: 10

Quote from: Ignition75 on April 01, 2014, 03:41:46 PM

Quote from: azerbaidjan on April 01, 2014, 03:33:52 PM

Quote from: Ignition75 on April 01, 2014, 03:05:57 PM

Quote from: cryptonator on April 01, 2014, 02:51:41 PM

Quote from: fireinyourhole on April 01, 2014, 12:27:17 PM

Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.

Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.

I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners

Lol... 0.000253 is my breakeven point... it is the same for me to buy at or lower than 0.000253 compare to mining...
And yea... this is my first post and first time mining n trading brand spanking new coin...

Hoping for more miners to come in n price may go up... big exchanges will be very good too ;p

At launch, I worked out the price to be .00083, diff was up. Then as diff went down I started lowering my price and it was upsetting people lol. What me worry, I'm happy to hold on a price that's representative of current difficulty x 10 Grin

Yep, and difficulty may not rise too fast if people cannot mine this thing.
well done

You're the only one having problems mining, stop being a cry baby and learn how to configure your hardware properly...

Thanks for your contribution dad. I can see you have enough miners so I'm going to mine something else.
You should have told straight ahead that you were not interested in people having trouble to setup their rig, that would have spared the time.

azerbaidjan

member

Activity: 98

Merit: 10

Quote from: sakr on April 01, 2014, 04:13:42 PM

Quote from: azerbaidjan on April 01, 2014, 03:33:52 PM

Yep, and difficulty may not rise too fast if people cannot mine this thing.
well done

Try completely uninstalling AMD drivers, then installing again, might fix your issues!

ScryptN is easier to mine than scrypt-chacha (aka jane)!

Well, If I can mine Scrypt-Jane with it, why couldn't I mine this easier NScrypt thing then?
I fail to see the logic. You'll have to excuse me for not believing in the traditional way of doing windows business that goes by rebooting and reinstalling everything forever.

sakr

sr. member

Activity: 364

Merit: 250

Quote from: azerbaidjan on April 01, 2014, 03:33:52 PM

Yep, and difficulty may not rise too fast if people cannot mine this thing.
well done

Try completely uninstalling AMD drivers, then installing again, might fix your issues!

ScryptN is easier to mine than scrypt-chacha (aka jane)!

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: azerbaidjan on April 01, 2014, 03:33:52 PM

Quote from: Ignition75 on April 01, 2014, 03:05:57 PM

Quote from: cryptonator on April 01, 2014, 02:51:41 PM

Quote from: fireinyourhole on April 01, 2014, 12:27:17 PM

Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.

Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.

I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners

Lol... 0.000253 is my breakeven point... it is the same for me to buy at or lower than 0.000253 compare to mining...
And yea... this is my first post and first time mining n trading brand spanking new coin...

Hoping for more miners to come in n price may go up... big exchanges will be very good too ;p

At launch, I worked out the price to be .00083, diff was up. Then as diff went down I started lowering my price and it was upsetting people lol. What me worry, I'm happy to hold on a price that's representative of current difficulty x 10 Grin

Yep, and difficulty may not rise too fast if people cannot mine this thing.
well done

You're the only one having problems mining, stop being a cry baby and learn how to configure your hardware properly...

azerbaidjan

member

Activity: 98

Merit: 10

Quote from: Ignition75 on April 01, 2014, 03:05:57 PM

Quote from: cryptonator on April 01, 2014, 02:51:41 PM

Quote from: fireinyourhole on April 01, 2014, 12:27:17 PM

Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.

Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.

I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners

Lol... 0.000253 is my breakeven point... it is the same for me to buy at or lower than 0.000253 compare to mining...
And yea... this is my first post and first time mining n trading brand spanking new coin...

Hoping for more miners to come in n price may go up... big exchanges will be very good too ;p

At launch, I worked out the price to be .00083, diff was up. Then as diff went down I started lowering my price and it was upsetting people lol. What me worry, I'm happy to hold on a price that's representative of current difficulty x 10 Grin

Yep, and difficulty may not rise too fast if people cannot mine this thing.
well done

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: cryptonator on April 01, 2014, 02:51:41 PM

Quote from: fireinyourhole on April 01, 2014, 12:27:17 PM

Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.

Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.

I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners

Lol... 0.000253 is my breakeven point... it is the same for me to buy at or lower than 0.000253 compare to mining...
And yea... this is my first post and first time mining n trading brand spanking new coin...

Hoping for more miners to come in n price may go up... big exchanges will be very good too ;p

At launch, I worked out the price to be .00083, diff was up. Then as diff went down I started lowering my price and it was upsetting people lol. What me worry, I'm happy to hold on a price that's representative of current difficulty x 10 Grin

cryptonator

newbie

Activity: 16

Merit: 0

Quote from: fireinyourhole on April 01, 2014, 12:27:17 PM

Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.

Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.

I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners

Lol... 0.000253 is my breakeven point... it is the same for me to buy at or lower than 0.000253 compare to mining...
And yea... this is my first post and first time mining n trading brand spanking new coin...

Hoping for more miners to come in n price may go up... big exchanges will be very good too ;p

azerbaidjan

member

Activity: 98

Merit: 10

Quote from: TheStuhlman on April 01, 2014, 10:10:39 AM

Quote from: azerbaidjan on April 01, 2014, 09:58:55 AM

Quote from: Ignition75 on April 01, 2014, 09:55:20 AM

Quote from: azerbaidjan on April 01, 2014, 09:46:14 AM

Quote from: Rabbit80 on April 01, 2014, 09:36:43 AM

Quote from: azerbaidjan on April 01, 2014, 04:46:35 AM

Hi there,

Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.

Many thanks to whomever helps me out & take care.
az.

How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..

Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...

Thanks y'all for your help.

This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.

I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.

This could be a simple config error sometimes they are hard to spot. please post your config.

thanks for your help; here's my current config:

Quote

"failover-only" : true,
"scrypt-vert" : true,

"intensity" : "17",
"vectors" : "2",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "28200",

"expiry" : "120",
"gpu-threads" : "1",
"no-submit-stale" : true,

"scan-time" : "10",
"log" : "5",
"queue" : "1",

"gpu-engine" : "875",
"gpu-fan" : "100",
"gpu-memclock" : "1500",
"gpu-powertune" : "10",

"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"temp-hysteresis" : "3"

jootn2kx

full member

Activity: 378

Merit: 101

Estimated.Pro - Crypto Signals. Free.

dont even try to put such low buy support, no one is gonna sell it for that price

)

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: fireinyourhole on April 01, 2014, 12:39:22 PM

Quote from: Ignition75 on April 01, 2014, 10:27:35 AM

Quote from: azerbaidjan on April 01, 2014, 09:58:55 AM

Quote from: Ignition75 on April 01, 2014, 09:55:20 AM

Quote from: azerbaidjan on April 01, 2014, 09:46:14 AM

Quote from: Rabbit80 on April 01, 2014, 09:36:43 AM

Quote from: azerbaidjan on April 01, 2014, 04:46:35 AM

Hi there,

Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.

Many thanks to whomever helps me out & take care.
az.

How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..

Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...

Thanks y'all for your help.

This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.

I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.

Stranger things have happened... I run 30 rigs and it's a game of Russian Roulette with each one.

If you've tried a few 290x configs from here http://www.verters.com/vertcoin-hardware-list then post your config and let us take a look. I use my Vertcoin settings for all Scrypt-N Coins and they run fine, 270x, 280x, 290 and 290x cards...

Are you the handicapped miner dumping?

Hahaha... I am very new to the game but no, I mined 1000 CAI and priced them at .00083. I'm happy to hold...

sabharwal2001

newbie

Activity: 34

Merit: 0

Quote from: fireinyourhole on April 01, 2014, 12:27:17 PM

Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.

Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.

I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners

lol...it was you...i was one step above you to buy 80 cai...last night sb sold me at 10K sat...i think it's an end of month and miners are supposed to pay their electricity bills. :p

sakr

sr. member

Activity: 364

Merit: 250

CAI official p2pool

Please point your miners here:

http://thepool.pw:2888

and use your CAI address as username

for example -o http://thepool.pw:2888 -u CLbV9kZZG5...

you will receive payments directly to your address!

First block in, payments received, join us now!

masterkiller

sr. member

Activity: 643

Merit: 253

CAI is listed at Coin-Swap.net

Please read our new Quick Start guide to help you get started!

Our History and NEW market launch 4 days ago
Coin-Swap has been around since January and you can read our feedback thread for credibility. We just launched our NEW MARKET system on the 28th, so the system may appear empty but we have been an active exchange for over 2 months. Come check us out!

Attention Miners: AUTO-SELL
Miners! We have an auto-sell feature so you can set your mining pool address to your order address at Coin-Swap. This will continue to add what you mine to a single order instead of having an order open for each deposit. You can change the price of your order without having to cancel and create a new order. Simply change the price!

Attention Pool operators: Easier order management
Want to offer your payouts in BTC? Want less headache managing your orders? Contact us for more information and special rates.

Immediate Payouts
As soon as your order executes, we send you your coins. We do this to minimize your risk. This is why you need to fill out both your H2O and BTC addresses in your profile.

How to get started at Coin-Swap
Please read our Quick Start guide to help you get started!

Contact Us
If you have any problems or questions about setting up an order please feel free to contact us! coinswapnet at gmail.com or #coin-swap on Freenode.

Ian

fireinyourhole

sr. member

Activity: 266

Merit: 250

Quote from: Ignition75 on April 01, 2014, 10:27:35 AM

Quote from: azerbaidjan on April 01, 2014, 09:58:55 AM

Quote from: Ignition75 on April 01, 2014, 09:55:20 AM

Quote from: azerbaidjan on April 01, 2014, 09:46:14 AM

Quote from: Rabbit80 on April 01, 2014, 09:36:43 AM

Quote from: azerbaidjan on April 01, 2014, 04:46:35 AM

Hi there,

Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.

Many thanks to whomever helps me out & take care.
az.

How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..

Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...

Thanks y'all for your help.

This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.

I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.

Stranger things have happened... I run 30 rigs and it's a game of Russian Roulette with each one.

If you've tried a few 290x configs from here http://www.verters.com/vertcoin-hardware-list then post your config and let us take a look. I use my Vertcoin settings for all Scrypt-N Coins and they run fine, 270x, 280x, 290 and 290x cards...

Are you the handicapped miner dumping?

fireinyourhole

sr. member

Activity: 266

Merit: 250

Sell into my .00015 despo miners plz

Topic: ★★★★ [CAIx] ★ First 100% PoS At Launch ★ PSP ★★★★ - page 190. (Read 416461 times)