Where is buy support? all I see is dumbass miners dumping to .00025, lucky man at .00025 - i will lose faith in humanity if my .00025 gets filled right now.
Noob miners have dumped over 10k of .0003 - .0004 caishen into my wallet. There will be a bit smarter noobs who will wait to dump on the first high vol exchange. Is fun to filter out the noobs by making them sell cheap.
I have been through several IPOs as I am sure all of you ppl have, legit ipo is investing in dumbass miners
Topic: ★★★★ [CAIx] ★ First 100% PoS At Launch ★ PSP ★★★★ - page 191. (Read 416461 times)
Peoples posted conf files don't seem to work for me either. This one works for me though. It is apparently not ideal compared to others posted but it's what works on my computer. Try it and see what happens.
"intensity" : "12",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "4096",
"temp-cutoff" : "90",
"expiry" : "30",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0,1,2",
"gpu-threads" : "2"
}
I have a 280x
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...
Thanks y'all for your help.
This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.
I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.
"intensity" : "12",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "4096",
"temp-cutoff" : "90",
"expiry" : "30",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0,1,2",
"gpu-threads" : "2"
}
I have a 280x
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...
Thanks y'all for your help.
This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.
I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...
Thanks y'all for your help.
This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.
I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.
Stranger things have happened... I run 30 rigs and it's a game of Russian Roulette with each one.
If you've tried a few 290x configs from here http://www.verters.com/vertcoin-hardware-list then post your config and let us take a look. I use my Vertcoin settings for all Scrypt-N Coins and they run fine, 270x, 280x, 290 and 290x cards...
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...
Thanks y'all for your help.
This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.
I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.
This could be a simple config error sometimes they are hard to spot. please post your config.
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...
Thanks y'all for your help.
This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.
I'm sorry but I fail to see why should I reflash the mobo bios because I can't mine vert-scrypt whereas it works perfectly for everything else.
Does not make any sense to me because this can't be a communication problem otherwise it would not work with other scrypts.
I won't do this.
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...
Thanks y'all for your help.
This might not sound right, but it fixed a similar problem I had with one of my rigs recently, re-flash motherboard BIOS. Don't ask me why or how, it just worked.
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
Per rig: 2 asus radeon r9 290x GPUs, 24Gb RAM, xxTB disk, win7 64 and vertminer 0.5.3
No matter the options I always the screen flickering before the OS gets back to me with a lousy message telling it had to reinit my GPUs.
I tried the 7950, 280x, 290, and even 290x setting given on the vertminer thread but without success.
I would so love to flip that bic to crisp that chick...
Thanks y'all for your help.
Quote
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Just use the same settings for the 290, they will work fine... Start with a fresh install of Vertminer...
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
How many GPUs, how much RAM and can you post a config you have tried? Perhaps somebody can spot the problem..
AND.... WE ARE BACK.....
In the title to this thread, it says this coin is low energy.. so why is my 290 running hot (82C - normally I keep it under 75C) with the fan maxed out (Normally at around 70% with other coins)??
I am getting approx 440KH/s on a single card - is this about right?
I am getting approx 440KH/s on a single card - is this about right?
CAI is more energy eficient than most scrypt coins, but compared to x11 algo coins it's not. This is not the best summer mining coin but that also mens noting in coin success.
Lol.. seems to be worked much harder than any other coin I have mined so far! Can't imagine that it is that energy efficient.. Not worried about my electric as I get it free, but I am worried that the fan on my GPU will burn out in a few weeks!
You probably have wrong settings in your .conf.
Scrypt-vert is cooler and less power hungry than scrypt so certainly your statement about it "seems to be worked much harder than any other coin I have mined so far" is outright wrong.
Maybe, if you're not just a x11 groupie, post your .conf/.bat and we can try to help you out.
Sure...
Code:
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt-vert" : true,
"auto-fan" : true,
"gpu-threads" : "1",
"gpu-engine" : "1045",
"gpu-fan" : "20-100",
"gpu-memclock" : "1450",
"gpu-powertune" : "20",
"intensity" : "19",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"vectors" : "2",
"worksize" : "256",
"thread-concurrency" : "28200",
"lookup-gap" : "2"
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt-vert" : true,
"auto-fan" : true,
"gpu-threads" : "1",
"gpu-engine" : "1045",
"gpu-fan" : "20-100",
"gpu-memclock" : "1450",
"gpu-powertune" : "20",
"intensity" : "19",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"vectors" : "2",
"worksize" : "256",
"thread-concurrency" : "28200",
"lookup-gap" : "2"
These are the same settings (engine, mem, powertune, intensity and fan)I have used for Doge, Litecoin and Ultracoin.. never had it maxing the fan out trying to keep under 75C
Nevermind.. had some help on IRC and now running at same KH/s with only 72% fan
You're settings are about right for a 290. Getting similar speed and temps, my config varies on slightly:
"intensity" : "19",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "24550",
"gpu-engine" : "1000",
"auto-fan" : true,
"gpu-memclock" : "1500",
"gpu-powertune" : "50",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "70",
"gpu-fan" : "20-100",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"scrypt-vert" : true
}
Amazingly, lowering TC, engine and memclock gives the same speeds now!
New config:
Code:
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt-vert" : true,
"auto-fan" : true,
"gpu-threads" : "1",
"gpu-engine" : "993",
"gpu-fan" : "20-100",
"gpu-memclock" : "1250",
"gpu-powertune" : "25",
"intensity" : "19",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"vectors" : "2",
"worksize" : "256",
"thread-concurrency" : "22500",
"lookup-gap" : "2"
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "10",
"scrypt-vert" : true,
"auto-fan" : true,
"gpu-threads" : "1",
"gpu-engine" : "993",
"gpu-fan" : "20-100",
"gpu-memclock" : "1250",
"gpu-powertune" : "25",
"intensity" : "19",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"vectors" : "2",
"worksize" : "256",
"thread-concurrency" : "22500",
"lookup-gap" : "2"
Is giving me 440KH/s for much less stress on the GPU!
Now I need help for a 280X which I cannot get over 310KH/s due to having to run low intensity. Anything over 13 gives HW errors
Also - see the post above - come join us at binaryfund and get this new exchange kicking!
Hi there,
Spent a few hours yesterday trying to figure out a config for 290x, alas to no avail.
So far I can't mine anything, even a bare 280x or a 290 config does not work (GPUs reset all over the place, nothing works).
And my GPUs work very well with LTC, UTC, YAC etc. So it's not a question of whether they are broken or not. They're fine.
Many thanks to whomever helps me out & take care.
az.
This is another possible logo, posted earlier, but I think it was missed, so I am posting it again.
CIA: CJ7ujXuaiTagMwqNx2UQskHYJNYKMd84du
2nd Candidate:
http://tdillingham.com/images/sampledata/caishensamples/CaishenCoin-2.png
http://tdillingham.com/images/sampledata/caishensamples/CaishenCoin-2.png
CIA: CJ7ujXuaiTagMwqNx2UQskHYJNYKMd84du
2nd Candidate:
http://tdillingham.com/images/sampledata/caishensamples/CaishenCoin-2.png
http://tdillingham.com/images/sampledata/caishensamples/CaishenCoin-2.png
Here is another possibility.
I removed the Chinese language, kept the graphic theme, and went for more of an international feel on this one.
CAI: CJ7ujXuaiTagMwqNx2UQskHYJNYKMd84du
http://www.tdillingham.com/images/sampledata/caishensamples/CaishenCoin-3-Reb-6a000e.png
I removed the Chinese language, kept the graphic theme, and went for more of an international feel on this one.
CAI: CJ7ujXuaiTagMwqNx2UQskHYJNYKMd84du
http://www.tdillingham.com/images/sampledata/caishensamples/CaishenCoin-3-Reb-6a000e.png
I'm new to coin-swap, but looks like a streamlined site. ARe there any other exchanges on the horizon?
Yes more exchanges are on the way. Although we wanted to time that with our Ads, but seems most people are in a rush
So ad campaign starting which Monday? Today, or a week from today? What does the ad campaign consist of?
I'm new to coin-swap, but looks like a streamlined site. ARe there any other exchanges on the horizon?
Yes more exchanges are on the way. Although we wanted to time that with our Ads, but seems most people are in a rush
I'm new to coin-swap, but looks like a streamlined site. ARe there any other exchanges on the horizon?
it aint too userfriendly to set it up but once you found out how it works its a great exchange
I'm new to coin-swap, but looks like a streamlined site. ARe there any other exchanges on the horizon?
Thank you to everyone that has been trading on Coin-Swap, CAI has been holding very steady at 0.00043!
Our History and NEW market launch 3 days ago
Coin-Swap has been around since January and you can read our feedback thread for credibility. We just launched our NEW MARKET system on the 28th, so the system may appear empty but we have been an active exchange for over 2 months. Come check us out!
Attention Miners: AUTO-SELL
Miners! We have an auto-sell feature so you can set your mining pool address to your order address at Coin-Swap. This will continue to add what you mine to a single order instead of having an order open for each deposit. You can change the price of your order without having to cancel and create a new order. Simply change the price!
Immediate Payouts
As soon as your order executes, we send you your coins. We do this to minimize your risk. This is why you need to fill out both your H2O and BTC addresses in your profile.
How to get started at Coin-Swap
First you need to register: Register
Then you need to put in BOTH your H2O and BTC wallet addresses in your profile: Profile
Then to create an order you go to the market: H2O/BTC and set a price for your Buy or Sell order.
After you create your order
You will receive a popup with an address to send in your coins. Once received, your order is set. You can send in as many coins as you want to this address and it will list them at the price set for this order. If you send in more coins after the order is created, it'll add the additional coins to your balance. You can change the order price at any time. Unless you want multiple price entry points in the same market, you likely will only ever need one buy order and one sell order.
Contact Us
If you have any problems or questions about setting up an order please feel free to contact us! coinswapnet at gmail.com
Ian
Our History and NEW market launch 3 days ago
Coin-Swap has been around since January and you can read our feedback thread for credibility. We just launched our NEW MARKET system on the 28th, so the system may appear empty but we have been an active exchange for over 2 months. Come check us out!
Attention Miners: AUTO-SELL
Miners! We have an auto-sell feature so you can set your mining pool address to your order address at Coin-Swap. This will continue to add what you mine to a single order instead of having an order open for each deposit. You can change the price of your order without having to cancel and create a new order. Simply change the price!
Immediate Payouts
As soon as your order executes, we send you your coins. We do this to minimize your risk. This is why you need to fill out both your H2O and BTC addresses in your profile.
How to get started at Coin-Swap
First you need to register: Register
Then you need to put in BOTH your H2O and BTC wallet addresses in your profile: Profile
Then to create an order you go to the market: H2O/BTC and set a price for your Buy or Sell order.
After you create your order
You will receive a popup with an address to send in your coins. Once received, your order is set. You can send in as many coins as you want to this address and it will list them at the price set for this order. If you send in more coins after the order is created, it'll add the additional coins to your balance. You can change the order price at any time. Unless you want multiple price entry points in the same market, you likely will only ever need one buy order and one sell order.
Contact Us
If you have any problems or questions about setting up an order please feel free to contact us! coinswapnet at gmail.com
Ian
So when I changed my price from .00083 to .00043 I was on the money
I should have ignored people telling me to charge double...
I joined you at .00083. Happy there is this 8 day rule for IPO buyers.
OK, I've just started mining again, I'll hold station there as well, because of the IPO... Only putting 7 rigs on it I don't want to screw the diff, like I did with SPA...
Thank you to everyone that has been trading on Coin-Swap, CAI has been holding very steady at 0.00043!
Our History and NEW market launch 3 days ago
Coin-Swap has been around since January and you can read our feedback thread for credibility. We just launched our NEW MARKET system on the 28th, so the system may appear empty but we have been an active exchange for over 2 months. Come check us out!
Attention Miners: AUTO-SELL
Miners! We have an auto-sell feature so you can set your mining pool address to your order address at Coin-Swap. This will continue to add what you mine to a single order instead of having an order open for each deposit. You can change the price of your order without having to cancel and create a new order. Simply change the price!
Immediate Payouts
As soon as your order executes, we send you your coins. We do this to minimize your risk. This is why you need to fill out both your H2O and BTC addresses in your profile.
How to get started at Coin-Swap
First you need to register: Register
Then you need to put in BOTH your H2O and BTC wallet addresses in your profile: Profile
Then to create an order you go to the market: H2O/BTC and set a price for your Buy or Sell order.
After you create your order
You will receive a popup with an address to send in your coins. Once received, your order is set. You can send in as many coins as you want to this address and it will list them at the price set for this order. If you send in more coins after the order is created, it'll add the additional coins to your balance. You can change the order price at any time. Unless you want multiple price entry points in the same market, you likely will only ever need one buy order and one sell order.
Contact Us
If you have any problems or questions about setting up an order please feel free to contact us! coinswapnet at gmail.com
Ian
Our History and NEW market launch 3 days ago
Coin-Swap has been around since January and you can read our feedback thread for credibility. We just launched our NEW MARKET system on the 28th, so the system may appear empty but we have been an active exchange for over 2 months. Come check us out!
Attention Miners: AUTO-SELL
Miners! We have an auto-sell feature so you can set your mining pool address to your order address at Coin-Swap. This will continue to add what you mine to a single order instead of having an order open for each deposit. You can change the price of your order without having to cancel and create a new order. Simply change the price!
Immediate Payouts
As soon as your order executes, we send you your coins. We do this to minimize your risk. This is why you need to fill out both your H2O and BTC addresses in your profile.
How to get started at Coin-Swap
First you need to register: Register
Then you need to put in BOTH your H2O and BTC wallet addresses in your profile: Profile
Then to create an order you go to the market: H2O/BTC and set a price for your Buy or Sell order.
After you create your order
You will receive a popup with an address to send in your coins. Once received, your order is set. You can send in as many coins as you want to this address and it will list them at the price set for this order. If you send in more coins after the order is created, it'll add the additional coins to your balance. You can change the order price at any time. Unless you want multiple price entry points in the same market, you likely will only ever need one buy order and one sell order.
Contact Us
If you have any problems or questions about setting up an order please feel free to contact us! coinswapnet at gmail.com
Ian
So when I changed my price from .00083 to .00043 I was on the money
I should have ignored people telling me to charge double...
I joined you at .00083. Happy there is this 8 day rule for IPO buyers.
Thank you to everyone that has been trading on Coin-Swap, CAI has been holding very steady at 0.00043!
Our History and NEW market launch 3 days ago
Coin-Swap has been around since January and you can read our feedback thread for credibility. We just launched our NEW MARKET system on the 28th, so the system may appear empty but we have been an active exchange for over 2 months. Come check us out!
Attention Miners: AUTO-SELL
Miners! We have an auto-sell feature so you can set your mining pool address to your order address at Coin-Swap. This will continue to add what you mine to a single order instead of having an order open for each deposit. You can change the price of your order without having to cancel and create a new order. Simply change the price!
Immediate Payouts
As soon as your order executes, we send you your coins. We do this to minimize your risk. This is why you need to fill out both your H2O and BTC addresses in your profile.
How to get started at Coin-Swap
First you need to register: Register
Then you need to put in BOTH your H2O and BTC wallet addresses in your profile: Profile
Then to create an order you go to the market: H2O/BTC and set a price for your Buy or Sell order.
After you create your order
You will receive a popup with an address to send in your coins. Once received, your order is set. You can send in as many coins as you want to this address and it will list them at the price set for this order. If you send in more coins after the order is created, it'll add the additional coins to your balance. You can change the order price at any time. Unless you want multiple price entry points in the same market, you likely will only ever need one buy order and one sell order.
Contact Us
If you have any problems or questions about setting up an order please feel free to contact us! coinswapnet at gmail.com
Ian
Our History and NEW market launch 3 days ago
Coin-Swap has been around since January and you can read our feedback thread for credibility. We just launched our NEW MARKET system on the 28th, so the system may appear empty but we have been an active exchange for over 2 months. Come check us out!
Attention Miners: AUTO-SELL
Miners! We have an auto-sell feature so you can set your mining pool address to your order address at Coin-Swap. This will continue to add what you mine to a single order instead of having an order open for each deposit. You can change the price of your order without having to cancel and create a new order. Simply change the price!
Immediate Payouts
As soon as your order executes, we send you your coins. We do this to minimize your risk. This is why you need to fill out both your H2O and BTC addresses in your profile.
How to get started at Coin-Swap
First you need to register: Register
Then you need to put in BOTH your H2O and BTC wallet addresses in your profile: Profile
Then to create an order you go to the market: H2O/BTC and set a price for your Buy or Sell order.
After you create your order
You will receive a popup with an address to send in your coins. Once received, your order is set. You can send in as many coins as you want to this address and it will list them at the price set for this order. If you send in more coins after the order is created, it'll add the additional coins to your balance. You can change the order price at any time. Unless you want multiple price entry points in the same market, you likely will only ever need one buy order and one sell order.
Contact Us
If you have any problems or questions about setting up an order please feel free to contact us! coinswapnet at gmail.com
Ian
So when I changed my price from .00083 to .00043 I was on the money
I should have ignored people telling me to charge double...
Jump to: