Claymore XPM GPU Miner discussion - page 11.

hashfun

member

Activity: 117

Merit: 10

Quote from: csa1234 on May 19, 2014, 03:26:39 PM

im solo mining... making only 2 block per day (14.94 XPM including 10% claymore fees)

14.94 XPM x 0.001294 BTC = 0.01934 BTC/day (6 x GPU)

x11 mining = 0.02 BTC/day (6xGPU) 50% less energy consumption + 60°C stable temps with fan on my rig

Time to move on to X11.... good bye primecoin

Check PM question about out of XPM

csa1234

full member

Activity: 289

Merit: 100

O2-Protocol.com Carbon Offset DeFi

im solo mining... making only 2 block per day (14.94 XPM including 10% claymore fees)

14.94 XPM x 0.001294 BTC = 0.01934 BTC/day (6 x GPU)

x11 mining = 0.02 BTC/day (6xGPU) 50% less energy consumption + 60°C stable temps with fan on my rig

Time to move on to X11.... good bye primecoin

bclcjunkie

hero member

Activity: 833

Merit: 1001

pretty much same results... ypool dominates the scene now...unless there's another viable pool i'm taking a break from mining primecoins for now...

Quote from: hashfun on May 18, 2014, 11:40:48 AM

Quote from: serpiente12 on May 18, 2014, 11:21:01 AM

Quote from: Antioxidant on May 18, 2014, 07:19:45 AM

Quote from: ans34 on May 18, 2014, 07:14:33 AM

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

+1

Yes same having problem , last week then i switch to solo mining.
but from last 4 days there is no block found so unlucky

@csa1234
which version you use for mining gpool i thikn its only CPU Pool

hashfun

member

Activity: 117

Merit: 10

Quote from: serpiente12 on May 18, 2014, 11:21:01 AM

Quote from: Antioxidant on May 18, 2014, 07:19:45 AM

Quote from: ans34 on May 18, 2014, 07:14:33 AM

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

+1

Yes same having problem , last week then i switch to solo mining.
but from last 4 days there is no block found so unlucky

@csa1234
which version you use for mining gpool i thikn its only CPU Pool

csa1234

full member

Activity: 289

Merit: 100

O2-Protocol.com Carbon Offset DeFi

just switch to gpool.net

serpiente12

member

Activity: 85

Merit: 10

If you dont like something change it

Quote from: Antioxidant on May 18, 2014, 07:19:45 AM

Quote from: ans34 on May 18, 2014, 07:14:33 AM

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

+1

Antioxidant

hero member

Activity: 810

Merit: 1000

Quote from: ans34 on May 18, 2014, 07:14:33 AM

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

ans34

full member

Activity: 161

Merit: 100

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

bclcjunkie

hero member

Activity: 833

Merit: 1001

i know, just started.. i was just curious about others... Cheesy

Quote from: Claymore on May 18, 2014, 04:16:54 AM

Quote from: bclcjunkie on May 18, 2014, 02:55:16 AM

how's everyone's luck so far? i havent mined for some time now...

here are my stats for lulz...

Sun May 18 16:01:54 2014
New Block: 550670 - Current Diff: 10.961836, GPU CNT: 8 (4x7990)
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.947084
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 632K] [ 633] [ 80] [ 4] [ 1] [ 0] [ 0]
ch/h: [1470844] [1470.864] [185.891] [ 9.295] [ 2.324] [ 0.000] [ 0.000]
Estimated CPD: 40.7241, Average CPD: 55.7674, Mining time: 00:25

Sun May 18 16:02:00 2014
New Block: 550670 - Current Diff: 10.961836, GPU CNT: 4 (4xr9 290)
Total/Valid blocks: [ 0 / 0 ] - Max diff: 9.986997
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 464K] [ 469] [ 58] [ 10] [ 0] [ 0] [ 0]
ch/h: [ 986081] [995.201] [123.074] [ 21.220] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 27.1925, Average CPD: 0.0000, Mining time: 00:28

Why do you think that you are unlucky? You mine only for 28 minutes

With your 68 CPD you will find 4-5 blocks a day:
http://anty.info/primecoin-calculator/

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: bclcjunkie on May 18, 2014, 02:55:16 AM

how's everyone's luck so far? i havent mined for some time now...

here are my stats for lulz...

Sun May 18 16:01:54 2014
New Block: 550670 - Current Diff: 10.961836, GPU CNT: 8 (4x7990)
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.947084
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 632K] [ 633] [ 80] [ 4] [ 1] [ 0] [ 0]
ch/h: [1470844] [1470.864] [185.891] [ 9.295] [ 2.324] [ 0.000] [ 0.000]
Estimated CPD: 40.7241, Average CPD: 55.7674, Mining time: 00:25

Sun May 18 16:02:00 2014
New Block: 550670 - Current Diff: 10.961836, GPU CNT: 4 (4xr9 290)
Total/Valid blocks: [ 0 / 0 ] - Max diff: 9.986997
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 464K] [ 469] [ 58] [ 10] [ 0] [ 0] [ 0]
ch/h: [ 986081] [995.201] [123.074] [ 21.220] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 27.1925, Average CPD: 0.0000, Mining time: 00:28

Why do you think that you are unlucky? You mine only for 28 minutes

With your 68 CPD you will find 4-5 blocks a day:
http://anty.info/primecoin-calculator/

bclcjunkie

hero member

Activity: 833

Merit: 1001

how's everyone's luck so far? i havent mined for some time now...

here are my stats for lulz...

Sun May 18 16:01:54 2014
New Block: 550670 - Current Diff: 10.961836, GPU CNT: 8 (4x7990)
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.947084
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 632K] [ 633] [ 80] [ 4] [ 1] [ 0] [ 0]
ch/h: [1470844] [1470.864] [185.891] [ 9.295] [ 2.324] [ 0.000] [ 0.000]
Estimated CPD: 40.7241, Average CPD: 55.7674, Mining time: 00:25

Sun May 18 16:02:00 2014
New Block: 550670 - Current Diff: 10.961836, GPU CNT: 4 (4xr9 290)
Total/Valid blocks: [ 0 / 0 ] - Max diff: 9.986997
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 464K] [ 469] [ 58] [ 10] [ 0] [ 0] [ 0]
ch/h: [ 986081] [995.201] [123.074] [ 21.220] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 27.1925, Average CPD: 0.0000, Mining time: 00:28

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: tfl3rd on May 16, 2014, 09:13:55 PM

Question:

1 of 2 GPU's keeps dropping out - stays connected to Ypool but quits producing shares ...

Claymore V9.1, Gigabyte board, AX860i PSU, Sempron 145 (unlocked - 2 cores operating), 8G RAM DDR3, 2 ASUS R290 GPU's ... some times it runs for 15 to 16 hours, sometimes 15 min ? AMD Name   AMD Radeon R9 200 Series

Adapter Description   AMD Radeon R9 200 Series
Adapter RAM   (1,048,576) bytes

Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll

Driver Version   13.251.0.0

Any troubleshooting suggestions ?

Are you mining at overclock settings? If yes, then try default settings first. Check to make sure your power supply isn't having any issues. I had a burn/melted pci-e power connector gave me an issue on my Silverstone 1000 watt psu, which I replaced and don't have no issues with overclocking my core clock.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: smtn512 on May 16, 2014, 09:19:30 PM

Any chance of seeing a diff 11 optimized miner soon? Finding a diff 10 share gives less than a 5% chance of actually being rewarded by the network now...

I already have v9.1 for Diff 11, but it is slower than v9.1 for Diff 10 since it produces much less 10ch, so I decided not to release it right now. Version for Diff 11 will work faster at Diff 10.98-10.99, I will release it then.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: tfl3rd on May 16, 2014, 09:13:55 PM

Question:

Any troubleshooting suggestions ?

Try to follow "troubleshooting" section in readme. If it does not help it means that probably your system is unstable for some reason. I have a few rigs based on 290 series cards and they all work properly, I test all versions on 290X cards mostly.

smtn512

newbie

Activity: 34

Merit: 0

Any chance of seeing a diff 11 optimized miner soon? Finding a diff 10 share gives less than a 5% chance of actually being rewarded by the network now...

tfl3rd

newbie

Activity: 1

Merit: 0

Question:

1 of 2 GPU's keeps dropping out - stays connected to Ypool but quits producing shares ...

Claymore V9.1, Gigabyte board, AX860i PSU, Sempron 145 (unlocked - 2 cores operating), 8G RAM DDR3, 2 ASUS R290 GPU's ... some times it runs for 15 to 16 hours, sometimes 15 min ? AMD Name   AMD Radeon R9 200 Series

Adapter Description   AMD Radeon R9 200 Series
Adapter RAM   (1,048,576) bytes

Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll

Driver Version   13.251.0.0

Any troubleshooting suggestions ?

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: aistto on May 16, 2014, 01:48:41 PM

Quote from: Claymore on May 15, 2014, 05:20:25 AM

Quote from: aistto on May 15, 2014, 04:41:12 AM

v8 -> v9 power consumption jump Sad

~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.

It's my mistake, VGA wasn't downclock

Quote from: aistto on May 06, 2014, 03:04:12 AM

Power consumption from wall.

I measured it on one of my rig, not new (old):
- CPU: core2duo
- Mem: DDR2 2Gb
- PSU: Enermax 550W (old, even not bronze)
- VGA: 2*XFX280X GPU/MEM:1030/1500 VCDD:1v

miner setting GPU 0/1: -ss 1/2 -t default/8

Miner v2.0 375w
Miner v2.1 380w
Miner v3.0 405w
Miner v3.1b 410w
Miner v4.0 405w
Miner v5.0 400w
Miner v6.0 395w

I don't remember v7 and v8 power consumption
but I did last measurement
v9.1 460

That's getting a little high for wattage for the v9.1. Maybe try to underclock the memory and it shouldn't affect the cpd as long as the core clock isn't changed.

aistto

legendary

Activity: 1001

Merit: 1005

Quote from: Claymore on May 15, 2014, 05:20:25 AM

Quote from: aistto on May 15, 2014, 04:41:12 AM

v8 -> v9 power consumption jump Sad

~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.

It's my mistake, VGA wasn't downclock

Quote from: aistto on May 06, 2014, 03:04:12 AM

Power consumption from wall.

I measured it on one of my rig, not new (old):
- CPU: core2duo
- Mem: DDR2 2Gb
- PSU: Enermax 550W (old, even not bronze)
- VGA: 2*XFX280X GPU/MEM:1030/1500 VCDD:1v

miner setting GPU 0/1: -ss 1/2 -t default/8

Miner v2.0 375w
Miner v2.1 380w
Miner v3.0 405w
Miner v3.1b 410w
Miner v4.0 405w
Miner v5.0 400w
Miner v6.0 395w

I don't remember v7 and v8 power consumption
but I did last measurement
v9.1 460

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: Romulo on May 16, 2014, 07:52:46 AM

Is it possible to connect few other rigs with one wallet ? I have tryed with option rpcconnect in wallet conf file, but it doesn't work. Only def 127.0.0.1 is working.

Quote from: Strannik-74 on April 29, 2014, 10:22:06 AM

Quote from: mfqrs3 on April 29, 2014, 09:46:14 AM

Is it possible to connect few other rigs with one wallet ? I have tryed with option rpcconnect in wallet conf file, but it doesn't work. Only def 127.0.0.1 is working.

Why did you write the same thing?

old_pioner

full member

Activity: 139

Merit: 100

Quote from: Hikikomori on May 16, 2014, 06:41:52 AM

Quote from: glinko on May 16, 2014, 06:25:20 AM

Quote from: user2 on May 16, 2014, 06:06:07 AM

This platform is clearly outdated and not up to the task. Why are we not moving to reddit? Claymore, could you create subreddit or just use /r/primecoin?

+1
Couse little ukrainian idiots posts a shit there and floods the thread without any respect to other members...
А тебе, маленький украинский засранец old_pioner, следует продать свои старые глючные железки для майнинга и купить себе мозг, чтобы понять что ты пишешь, где ты пишешь и как ты пишешь.

Какие лучше всего выставить настройки в Afterburner для MSI 7950 что бы график не шёл волной?

Какой волной? даблклик по белой точке в графике аб. График станет ступенчатый.
А тебе glinko, жопа путинская, а не респект, которую вы уже зализали до того, что дырка исчезла.
Я русский и живу в рфии, просто не зомбирован в отличие от вас.
Admin, ban please here stupid russian putin fascist glinko. He mean russia uber alles.

Topic: Claymore XPM GPU Miner discussion - page 11. (Read 142123 times)