Pages:
Author

Topic: Claymore XPM GPU Miner discussion - page 13. (Read 142111 times)

donator
Activity: 1610
Merit: 1325
Miners developer
May 15, 2014, 04:35:45 PM
I released a small update v9.1.

-Improved speed by about 4% for all cards. Up to 8.0 CPD on 290X.


Freaking great job.... im getting 6.20 CPD per R9 280x

by the way, is there a chance you could migrate your miner to work with beeeeer pool?

what cards?
what settings GPU clock and memory?
i have r9 280x vapor-x and 5.2 CPD


same card but only 4.3 CPD (default setting)

Probably either you use not 13.12 catalyst, or you have slow CPU and many cards, use "-ss 2" or even "-ss 3".
newbie
Activity: 38
Merit: 0
May 15, 2014, 04:04:00 PM
I released a small update v9.1.

-Improved speed by about 4% for all cards. Up to 8.0 CPD on 290X.


Freaking great job.... im getting 6.20 CPD per R9 280x

by the way, is there a chance you could migrate your miner to work with beeeeer pool?

what cards?
what settings GPU clock and memory?
i have r9 280x vapor-x and 5.2 CPD


same card but only 4.3 CPD (default setting)
newbie
Activity: 36
Merit: 0
May 15, 2014, 03:37:49 PM
Does anybody know how much faster this miner is with 13.12 drivers compared to 14.4? I'm not sure it's worth downgrading...
I get 6.2 CPD on my R9 280x at stock speeds (6.4 CPD at 1250Mhz core/1650Mhz mem), miner v9.1 with Catalyst 14.4...
 
full member
Activity: 140
Merit: 100
May 15, 2014, 03:19:41 PM
I released a small update v9.1.

-Improved speed by about 4% for all cards. Up to 8.0 CPD on 290X.


Freaking great job.... im getting 6.20 CPD per R9 280x

by the way, is there a chance you could migrate your miner to work with beeeeer pool?

what cards?
what settings GPU clock and memory?
i have r9 280x vapor-x and 5.2 CPD
full member
Activity: 289
Merit: 100
O2-Protocol.com Carbon Offset DeFi
May 15, 2014, 02:40:05 PM
I released a small update v9.1.

-Improved speed by about 4% for all cards. Up to 8.0 CPD on 290X.


Freaking great job.... im getting 6.20 CPD per R9 280x

by the way, is there a chance you could migrate your miner to work with beeeeer pool?
donator
Activity: 1610
Merit: 1325
Miners developer
May 15, 2014, 01:19:56 PM

have one question regarding solo mining..

sometime pc crashed or Power off during mining so what we lose?
if pc crashed during mining Diff - 10.7400 and when restart mining its start from Diff- 9.80 and after 2hr of mining diff goes to 10.74
so its mean we lose 2hr mining in one time crashed?

or nothing lose?

You can restart miner at any time, you don't lose anything. You lose only within time you are not mining.
member
Activity: 117
Merit: 10
May 15, 2014, 01:08:31 PM
I released a small update v9.1.

-Improved speed by about 4% for all cards. Up to 8.0 CPD on 290X.

Version for Diff 11 will be available within 1 day.



have one question regarding solo mining..

sometime pc crashed or Power off during mining so what we lose?
if pc crashed during mining Diff - 10.7400 and when restart mining its start from Diff- 9.80 and after 2hr of mining diff goes to 10.74
so its mean we lose 2hr mining in one time crashed?

or nothing lose?



donator
Activity: 1610
Merit: 1325
Miners developer
May 15, 2014, 12:24:15 PM
I released a small update v9.1.

-Improved speed by about 4% for all cards. Up to 8.0 CPD on 290X.
full member
Activity: 430
Merit: 100
May 15, 2014, 11:11:43 AM
v8 -> v9 power consumption jump Sad ~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.
Guys, can someone with a wattmeter measure the exact power consumption of v8 and v9 compared to scrypt mining?
Cause we may be close to the edge, when even xpm gpu mining becomes unprofitable in terms of electricity bills...

v9 powertunes +20%, thats more or less like scrypt for me. i lowered it to -10% and had to lower the clocks a bit, the results are a bit slower but its a must for power savings.
newbie
Activity: 3
Merit: 0
May 15, 2014, 11:05:04 AM
v8 -> v9 power consumption jump Sad ~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.
Guys, can someone with a wattmeter measure the exact power consumption of v8 and v9 compared to scrypt mining?
Cause we may be close to the edge, when even xpm gpu mining becomes unprofitable in terms of electricity bills...
4x 290 Tri-X, v8 1050W, v9 1130W, script 1320W, but values are not constant
sr. member
Activity: 303
Merit: 250
May 15, 2014, 10:48:24 AM
v8 -> v9 power consumption jump Sad ~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.
Guys, can someone with a wattmeter measure the exact power consumption of v8 and v9 compared to scrypt mining?
Cause we may be close to the edge, when even xpm gpu mining becomes unprofitable in terms of electricity bills...
donator
Activity: 1610
Merit: 1325
Miners developer
May 15, 2014, 09:55:52 AM
Claymore, is it ok mine solo with Primecoin High Performance 0.1.2 ? Or it must be only official client ?

You can use Primecoin High Performance as well.
hero member
Activity: 666
Merit: 500
May 15, 2014, 08:55:51 AM
Guys whats your hashrate and clocks for v9/280x?
newbie
Activity: 42
Merit: 0
May 15, 2014, 07:43:13 AM
Claymore, could you comment on the likelihood/difficulty of an ASIC miner for XPM?
legendary
Activity: 1596
Merit: 1011
May 15, 2014, 06:51:50 AM
Claymore, is it ok mine solo with Primecoin High Performance 0.1.2 ? Or it must be only official client ?
newbie
Activity: 34
Merit: 0
May 15, 2014, 05:39:24 AM
With the massive changes to power consumption from v8 to v9, it looks like v8 may be the most profitable to mine  Huh.
full member
Activity: 348
Merit: 102
May 15, 2014, 05:25:02 AM
Yesterday on account Ypool I had 65 unconfirmed XPM, today was 16. Payments was not all ... Ypool stole.

Check ypool chat history, it was a bug in stats, a few days ago "unconfirmed xpm" values started showing big values, now it is fixed. So you did not lose these unconfirmed coins since you did not have them. I saw this bug too, my unconfirmed coins were in 2-3 times more than usual and it is fixed now.
omg...
donator
Activity: 1610
Merit: 1325
Miners developer
May 15, 2014, 05:20:25 AM
v8 -> v9 power consumption jump Sad ~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.
donator
Activity: 1610
Merit: 1325
Miners developer
May 15, 2014, 05:14:17 AM
Yesterday on account Ypool I had 65 unconfirmed XPM, today was 16. Payments was not all ... Ypool stole.

Check ypool chat history, it was a bug in stats, a few days ago "unconfirmed xpm" values started showing big values, now it is fixed. So you did not lose these unconfirmed coins since you did not have them. I saw this bug too, my unconfirmed coins were in 2-3 times more than usual and it is fixed now.
full member
Activity: 348
Merit: 102
May 15, 2014, 04:54:32 AM
Yesterday on account Ypool I had 65 unconfirmed XPM, today was 16. Payments was not all ... Ypool stole.
Pages:
Jump to: