~35% 
Topic: Claymore XPM GPU Miner discussion - page 14. (Read 142114 times)
v8 -> v9 power consumption jump ~35%
~35% 
5.97 CPD with R9 280x (1175 / 750) solo mining
nice job Claymore, your miner is faster than the others by far
ch/h: 215.196
CPU: Intel i7 4770k
PS: Please keep using 13.12 as its the only driver that will work with my 6 x gpu on same board
nice job Claymore, your miner is faster than the others by far
ch/h: 215.196
CPU: Intel i7 4770k
PS: Please keep using 13.12 as its the only driver that will work with my 6 x gpu on same board
GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o 127.0.0.1:7332 -xpm AMvT6qnmA2WuCSMm428NYBarHfA7FBpg45 -di 01 -ss 3 -t 4
NsXpmMiner.exe -o 127.0.0.1:7332 -xpm AMvT6qnmA2WuCSMm428NYBarHfA7FBpg45 -di 01 -ss 3 -t 4
If you specified invalid login/password or wallet is not synced you will get different messages in miner. So probably you copied "primecoin.conf" file to wrong folder so wallet does not use it. Or you blocked miner in firewall.
- Wallet setup: copy default "primecoin.conf" file from miner archive to "c:\Users\YourWindowsLoginName\AppData\Roaming\Primecoin" folder, then start wallet.
- Miner setup: use default "miner solo sample.bat", just change xpm address, don't change login/password since default "primecoin.conf" file from miner uses them.
5 blocks today with 4 cards v8 solo
help me pls!http://i031.radikal.ru/1405/7f/1d27849758f6t.jpg
it must be so?
[/quote
In
miner solo sample.bat
=====================================
NsXpmMiner.exe -o 127.0.0.1:7332 -u YourLogin -p YourPassword -xpm AeRaNNK1JbZNKQTaXLJfeVUWQ5cPN5BiRF
=====================================
And in
Primecoin.conf
=====================================
rpcallowip=localhost
rpcallowip=192.168.1.*
rpcport=7332
=====================================
port must be same!
default rpcport 9912 in primecoin.]
5 blocks today with 4 cards v8 solo
help me pls!
it must be so?
GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o 127.0.0.1:7332 -u 11 -p 11 -xpm AMvT6qnmA2WuCSMm428NYBarHfA7FBpg45 -di 01 -ss 3 -t 4
GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o 127.0.0.1:7332 -xpm AMvT6qnmA2WuCSMm428NYBarHfA7FBpg45 -di 01 -ss 3 -t 4
and at connection of a purse 8 it will be normal in solo or I will lose blocks?
5 blocks today with 4 cards v8 solo
help me pls!it must be so?
GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o 127.0.0.1:7332 -u 11 -p 11 -xpm AMvT6qnmA2WuCSMm428NYBarHfA7FBpg45 -di 01 -ss 3 -t 4
5 blocks today with 4 cards v8 solo
help me pls!it must be so?
GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o 127.0.0.1:7332 -u 11 -p 11 -xpm AMvT6qnmA2WuCSMm428NYBarHfA7FBpg45 -di 01 -ss 3 -t 4
5 blocks today with 4 cards v8 solo
help me pls!it must be so?
5 blocks today with 4 cards v8 solo
help me pls!it must be so?
On most GPUs triggered throttling v9, no settings do not help, I do not know what to do = (
I had such throttling with one of 7950 even with v8.On v9 situation repeated. I'm using heavily undervolted GPUs, so I dropped core clock a bit, added +10 power limit and throttling gone, straight 99% gpu load.
v1.5-v8 all gpu work norm.
v9 - 7x7850 Gigabyte, 8x270Х Powercolor/Sapphire, 6x7950 ASUS/Gigabyte/Sapphire VaporX, 2x280X MSI - work normally
v9 - 10x7950 Sapphire Dual X & 20x270X Gigabyte(Best card in its class) - trottling. I have tried all possible options settings nothing helps.
Those cards that work norms:
v 8.0 v 9.0
280X 164k 4ch & TRT 152 & 4.9CPD -> 186k 4ch & TRT 132 & 5.5CPD-- CPD + 12%
7950 127k 4ch & TRT 195 & 3.7CPD -> 143k 4ch & TRT 170 & 4.2CPD-- CPD + 13%
270X 103k 4ch & TRT 242 & 3.0CPD -> 116k 4ch & TRT 200 & 3.4CPD-- CPD + 13%
7850 77k 4ch & TRT 320 & 2.3CPD -> 92k 4ch & TRT 267 & 2.7CPD-- CPD + 17%
I just noticed that without touching any other options (clocking and other) one of my ASUS 7950 (0.97V 950/625) with power limit 0% goes throttle, and with power limit +10% all fine (about 4 CPD).
Another ASUS 7950 on another machine with the same settings and power limit 0% works fine...
So I'm guessing v9 just draws more power...it is possible more noticeable with multi GPUs setups (however it is really strange that it depends on the models of the cards as in your example).
so why in the world i'm having 3.0 cpd for each 7950 , i tried everything , when i lower voltage with trix one of the gpus crash , but still 3.0 cpd i don't know what is the best value for voltage , and how can i reach 3.6 or more cpd , anyone helpp
its not just gpu based the cpu factors in a lot too
i have a small amd sempron , but some posts before stated that they have 3.6 cpd with -ss 2 , same as me ; i don't understand
so why in the world i'm having 3.0 cpd for each 7950 , i tried everything , when i lower voltage with trix one of the gpus crash , but still 3.0 cpd i don't know what is the best value for voltage , and how can i reach 3.6 or more cpd , anyone helpp
its not just gpu based the cpu factors in a lot too
so why in the world i'm having 3.0 cpd for each 7950 , i tried everything , when i lower voltage with trix one of the gpus crash , but still 3.0 cpd i don't know what is the best value for voltage , and how can i reach 3.6 or more cpd , anyone helpp
On most GPUs triggered throttling v9, no settings do not help, I do not know what to do = (
I had such throttling with one of 7950 even with v8.On v9 situation repeated. I'm using heavily undervolted GPUs, so I dropped core clock a bit, added +10 power limit and throttling gone, straight 99% gpu load.
v1.5-v8 all gpu work norm.
v9 - 7x7850 Gigabyte, 8x270Х Powercolor/Sapphire, 6x7950 ASUS/Gigabyte/Sapphire VaporX, 2x280X MSI - work normally
v9 - 10x7950 Sapphire Dual X & 20x270X Gigabyte(Best card in its class) - trottling. I have tried all possible options settings nothing helps.
Those cards that work norms:
v 8.0 v 9.0
280X 164k 4ch & TRT 152 & 4.9CPD -> 186k 4ch & TRT 132 & 5.5CPD-- CPD + 12%
7950 127k 4ch & TRT 195 & 3.7CPD -> 143k 4ch & TRT 170 & 4.2CPD-- CPD + 13%
270X 103k 4ch & TRT 242 & 3.0CPD -> 116k 4ch & TRT 200 & 3.4CPD-- CPD + 13%
7850 77k 4ch & TRT 320 & 2.3CPD -> 92k 4ch & TRT 267 & 2.7CPD-- CPD + 17%
On most GPUs triggered throttling v9, no settings do not help, I do not know what to do = (
I had such throttling with one of 7950 even with v8.On v9 situation repeated. I'm using heavily undervolted GPUs, so I dropped core clock a bit, added +10 power limit and throttling gone, straight 99% gpu load.
how can we undervolt a card ?? because i think all the non undervolted cards throttle with v9
On most GPUs triggered throttling v9, no settings do not help, I do not know what to do = (
I had such throttling with one of 7950 even with v8.On v9 situation repeated. I'm using heavily undervolted GPUs, so I dropped core clock a bit, added +10 power limit and throttling gone, straight 99% gpu load.
5 blocks today with 4 cards v8 solo
Guess you updated to v9 now? 
5 blocks today with 4 cards v8 solo
On most GPUs triggered throttling v9, no settings do not help, I do not know what to do = (
Jump to: