Claymore XPM GPU Miner discussion - page 16.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: slimdim on May 14, 2014, 08:02:27 AM

it work - GPU load 99% on 5770

Cards available: 3
GPU #2: name: Juniper, 1024 MB available, 10 units
Total: 1

Total/Valid shares: [ 0 / 0 ] - Max diff: 0.000000
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 0K] [ 0] [ 0] [ 0] [ 0] [ 0] [ 0]
ch/h: [ 18042] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 0.6021, Average CPD: 0.0000, Mining time: 00:01

05/14/14-16:05:24 - SHARE FOUND! DIFF:7.806778

Hmm, it really works

slimdim

full member

Activity: 140

Merit: 100

it work - GPU load 99% on 5770

Cards available: 3
GPU #2: name: Juniper, 1024 MB available, 10 units
Total: 1

Total/Valid shares: [ 0 / 0 ] - Max diff: 0.000000
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 0K] [ 0] [ 0] [ 0] [ 0] [ 0] [ 0]
ch/h: [ 18042] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 0.6021, Average CPD: 0.0000, Mining time: 00:01

05/14/14-16:05:24 - SHARE FOUND! DIFF:7.806778

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: SpeedDemon13 on May 14, 2014, 07:31:26 AM

Quote from: slimdim on May 14, 2014, 05:06:44 AM

2*280x vapor-x
1*5770

New Block: 543375 - Current Diff: 10.947311, GPU CNT: 3
Estimated CPD: 10.7793, Average CPD: 0.0000, Mining time: 00:10
05/14/14-13:05:13 - SHARE FOUND! DIFF:7.894100
05/14/14-13:05:36 - SHARE FOUND! DIFF:7.572854
05/14/14-13:05:42 - SHARE FOUND! DIFF:7.654802
05/14/14-13:05:44 - SHARE FOUND! DIFF:7.556091
Detailed stats mode enabled

Total/Valid shares: [ 66 / 65 ] - Max diff: 9.503026
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 69K] [ 58] [ 7] [ 1] [ 0] [ 0] [ 0]
ch/h: [ 365910] [306.289] [ 36.966] [ 5.281] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 10.7922, Average CPD: 0.0000, Mining time: 00:11

Detailed stats mode disabled

Surprised that the 5770 even works with the miner.

It was detected but probably it does not work.

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: slimdim on May 14, 2014, 05:06:44 AM

2*280x vapor-x
1*5770

New Block: 543375 - Current Diff: 10.947311, GPU CNT: 3
Estimated CPD: 10.7793, Average CPD: 0.0000, Mining time: 00:10
05/14/14-13:05:13 - SHARE FOUND! DIFF:7.894100
05/14/14-13:05:36 - SHARE FOUND! DIFF:7.572854
05/14/14-13:05:42 - SHARE FOUND! DIFF:7.654802
05/14/14-13:05:44 - SHARE FOUND! DIFF:7.556091
Detailed stats mode enabled

Total/Valid shares: [ 66 / 65 ] - Max diff: 9.503026
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 69K] [ 58] [ 7] [ 1] [ 0] [ 0] [ 0]
ch/h: [ 365910] [306.289] [ 36.966] [ 5.281] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 10.7922, Average CPD: 0.0000, Mining time: 00:11

Detailed stats mode disabled

Surprised that the 5770 even works with the miner.

jgle

member

Activity: 85

Merit: 10

Quote from: topnetdeal on May 14, 2014, 05:31:52 AM

Why You have 5 Instance's V9 ? Run only 1 with -di 01234.

yes

Strannik-74

full member

Activity: 348

Merit: 102

powerlimit 0, loading stabilized

topnetdeal

member

Activity: 61

Merit: 10

Why You have 5 Instance's for V9 ? Run only 1 with -di 01234.

Strannik-74

full member

Activity: 348

Merit: 102

5x7950 V9 began jumping loading

slimdim

full member

Activity: 140

Merit: 100

2*280x vapor-x
1*5770

New Block: 543375 - Current Diff: 10.947311, GPU CNT: 3
Estimated CPD: 10.7793, Average CPD: 0.0000, Mining time: 00:10
05/14/14-13:05:13 - SHARE FOUND! DIFF:7.894100
05/14/14-13:05:36 - SHARE FOUND! DIFF:7.572854
05/14/14-13:05:42 - SHARE FOUND! DIFF:7.654802
05/14/14-13:05:44 - SHARE FOUND! DIFF:7.556091
Detailed stats mode enabled

Total/Valid shares: [ 66 / 65 ] - Max diff: 9.503026
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 69K] [ 58] [ 7] [ 1] [ 0] [ 0] [ 0]
ch/h: [ 365910] [306.289] [ 36.966] [ 5.281] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 10.7922, Average CPD: 0.0000, Mining time: 00:11

Detailed stats mode disabled

jgle

member

Activity: 85

Merit: 10

3X280X 13.12 1150/1500

Total/Valid shares: [ 33 / 33 ] - Max diff: 9.688065
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 39K] [ 30] [ 3] [ 1] [ 0] [ 0] [ 0]
ch/h: [ 523080] [401.720] [ 40.172] [ 13.391] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 16.3929, Average CPD: 0.0000, Mining time: 00:04

Detailed stats mode disabled
Detailed stats mode enabled

Total/Valid shares: [ 34 / 34 ] - Max diff: 9.688065
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 39K] [ 30] [ 3] [ 1] [ 0] [ 0] [ 0]
ch/h: [ 522935] [397.538] [ 39.754] [ 13.251] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 16.4203, Average CPD: 0.0000, Mining time: 00:04

05/14/14-17:03:05 - SHARE FOUND! - (GPU 1) - DIFF:8.373178 - TYPE:1
05/14/14-17:03:09 - SHARE FOUND! - (GPU 1) - DIFF:7.710232 - TYPE:2

jgle

member

Activity: 85

Merit: 10

Quote from: Claymore on May 14, 2014, 03:25:32 AM

v9.0 is available:

- Improved speed by about 10-15% (depends on card type). Up to 7.7 CPD on a single 290X.
- Added multigpu support (for example, "-di 0123").

This version is for Diff 10. In 1-2 days I will release version for Diff 11.

3X280x how to set? As long as the operation of a bat? (-id 012)

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v9.0 is available:

- Improved speed by about 10-15% (depends on card type). Up to 7.7 CPD on a single 290X.
- Added multigpu support (for example, "-di 0123").

This version is for Diff 10. In 1-2 days I will release version for Diff 11.

bclcjunkie

hero member

Activity: 833

Merit: 1001

difficulty is bitch... no blocks since yesterday.... Angry

smtn512

newbie

Activity: 34

Merit: 0

Quote from: letitbit on May 13, 2014, 02:57:12 PM

Quote

Absolutely, I have 5 msi 7790s on claymore v8 right now, 3 solo and 2 on ypool. They are each getting ~64000 4ch/hr, and estimated 1.95 CPD. With 3 of them solo for the past 40 hours or so I've mined 2 blocks so far. Not officially supported but they work more than well IMO. My clocks are set to 1050/1000

I'm using msi too, just tried with default clocks for 2 hours, I'm getting 69000 4ch/hr, 1.98 CPD and still crawling up.
set the memory down not affecting mining speed?

My stats are virtually the same as yours, I just have 1 card that works a little slower and 10c hotter than the rest, my 4ch/hr is around 69000 for all the other cards. Clocking down memory does not appear to affect the work produced, just saves a little power and reduces heat. Although... I haven't hit another solo block since I dropped the memclock, I'm gonna believe that's just the luck factor right now. Watt usage seems to be around 75w/card.

zikomoto

sr. member

Activity: 280

Merit: 250

Quote from: urubu on May 13, 2014, 10:13:29 PM

It is the power limit % slider in afterburner.

ok now just 1 gpu is throttling , but still 2.6 2.7 cpd

urubu

member

Activity: 87

Merit: 10

It is the power limit % slider in afterburner.

zikomoto

sr. member

Activity: 280

Merit: 250

Quote from: urubu on May 13, 2014, 09:13:32 PM

Quote from: zikomoto on May 13, 2014, 12:13:46 PM

am i in the right way ??

Look at the graphs in afterburner. It looks like your cards are throttling. You should turn up powertune to +20. You can probably overclock the core speed a bit too.

Claymore, will there be an update before the difficulty hits 11 to tune for the 11 chains?

how can i set powertune to 20 , i don't see any option with this name

urubu

member

Activity: 87

Merit: 10

Quote from: zikomoto on May 13, 2014, 12:13:46 PM

am i in the right way ??

Look at the graphs in afterburner. It looks like your cards are throttling. You should turn up powertune to +20. You can probably overclock the core speed a bit too.

Claymore, will there be an update before the difficulty hits 11 to tune for the 11 chains?

zikomoto

sr. member

Activity: 280

Merit: 250

i can't go over 2.5 cpd now , with 7950 clocks 925/1250 -ss2 , is that it's limit ??

zikomoto

sr. member

Activity: 280

Merit: 250

Quote from: zikomoto on May 13, 2014, 05:38:35 PM

i have now the catalyst 13.12 and config set , but i see 1cpd that's very low , what i'm missing ??

Also miner tell me that catayst 13.12 is best for compatibility , is that an error msg or the program always print it

Edit : i'm an idiot , i was working with v0.6 Roll Eyes

Topic: Claymore XPM GPU Miner discussion - page 16. (Read 142100 times)