i have now the catalyst 13.12 and config set , but i see 1cpd that's very low , what i'm missing ??
Topic: Claymore XPM GPU Miner discussion - page 17. (Read 142111 times)
I am just wanting to know if something is wrong and I am wasting my time right now and need to change some settings. It is still finding channels but Diff hasn't changed like I said in over 20 hours.
Everything is OK with your miner. But you totally don't understand what is happening here in Primecoin.how to understand? i am also want to understand as i'm in same situation ,
i have 17x R9=270x and 7x 7970 ( found 3 block on 7970 on 1 rig) but not found any single block on other 23 rigs.
should i switch to POOL intead of solo mining?
or anyother way to use whole 24 rig power in one place? in solo mining
I am just wanting to know if something is wrong and I am wasting my time right now and need to change some settings. It is still finding channels but Diff hasn't changed like I said in over 20 hours.
Everything is OK with your miner. But you totally don't understand what is happening here in Primecoin. Catalyst 13.12 link: https://drive.google.com/file/d/0B69wv2iqszefdTMwd0VNU1lZb0k/edit?usp=sharing
If you cannot change Catalyst version: use AMD Clean-up utility:
http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
If you cannot change Catalyst version: use AMD Clean-up utility:
http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
oh thank's , now msi afterburner show 13.12 i'm waiting to see where cpd is going , how much do i need to wait to see true value
and i'm mining for each gpu with different adress , is that going to change anything ?
I was mainly concerned the max diff hasn't risen after finding 10ch. I thought I read that if max diff isn't above current diff then I have no chance at finding a block. Just dknow what makes the max diff rise.
You mean max diff like in
Tue May 13 22:46:12 2014
New Block: 542038 - Current Diff: 10.942038
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.531706
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 4926K] [ 4944] [ 573] [ 57] [ 5] [ 0] [ 0]
ch/h: [ 169920] [170.522] [ 19.763] [ 1.966] [ 0.172] [ 0.000] [ 0.000]
Estimated CPD: 4.8297, Average CPD: 4.1389, Mining time: 28:59
------------------------------------------------------------------------------
It's just max diff of chains your miner found. So if it's lower than current diff then you haven't found any blocks yet.
Correct. It just that my Max Diff hasn't changed in over 20 hours now. I have added 6 more 10ch and countless other channels.
I am just wanting to know if something is wrong and I am wasting my time right now and need to change some settings. It is still finding channels but Diff hasn't changed like I said in over 20 hours.
Catalyst 13.12 link: https://drive.google.com/file/d/0B69wv2iqszefdTMwd0VNU1lZb0k/edit?usp=sharing
If you cannot change Catalyst version: use AMD Clean-up utility:
http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
If you cannot change Catalyst version: use AMD Clean-up utility:
http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
For 7950 is considered normal 3.6-3.8 CPD, 1.9 is very small.
══════════════════════════════════════════════════════════════════════════════
Wed May 14 01:44:44 2014
New Block: 542118 - Current Diff: 10.942267
Total/Valid shares: [ 6732 / 6442 ] - Max diff: 10.981306
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 7366K] [ 5882] [ 773] [ 79] [ 11] [ 0] [ 0]
ch/h: [ 118829] [ 94.882] [ 12.469] [ 1.274] [ 0.177] [ 0.000] [ 0.000]
Estimated CPD: 3.6006, Average CPD: 4.2585, Mining time: 61:59
══════════════════════════════════════════════════════════════════════════════
══════════════════════════════════════════════════════════════════════════════
Wed May 14 01:44:44 2014
New Block: 542118 - Current Diff: 10.942267
Total/Valid shares: [ 6732 / 6442 ] - Max diff: 10.981306
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 7366K] [ 5882] [ 773] [ 79] [ 11] [ 0] [ 0]
ch/h: [ 118829] [ 94.882] [ 12.469] [ 1.274] [ 0.177] [ 0.000] [ 0.000]
Estimated CPD: 3.6006, Average CPD: 4.2585, Mining time: 61:59
══════════════════════════════════════════════════════════════════════════════
am i in the right way ??
Catalyst 14.4 on your screenshot
Even 270X must show CPD about 3.0. Install 13.12, use AMD Clean-up utility if you have any problems with it.
i used the cleanup utility and i downloaded catalyst 12.13 from here http://www.techspot.com/drivers/driver/file/information/17157/ i'm not getting errors but msi afterburner still show version 14.4 , and cpd is 1.5 for a single 7950 . could you give me a link where to download 13.12 i think the link i downloaded from is not the right one
edit : i installed now from http://www.guru3d.com/files_details/amd_catalyst_13_12_whql_download.html
and even if afterburner show 14.4 it's shownig good stats , so i post if anyone having same probleme
Quote
Absolutely, I have 5 msi 7790s on claymore v8 right now, 3 solo and 2 on ypool. They are each getting ~64000 4ch/hr, and estimated 1.95 CPD. With 3 of them solo for the past 40 hours or so I've mined 2 blocks so far. Not officially supported but they work more than well IMO. My clocks are set to 1050/1000
I'm using msi too, just tried with default clocks for 2 hours, I'm getting 69000 4ch/hr, 1.98 CPD and still crawling up.
set the memory down not affecting mining speed?
am i in the right way ??
Catalyst 14.4 on your screenshot
Even 270X must show CPD about 3.0. Install 13.12, use AMD Clean-up utility if you have any problems with it.
i used the cleanup utility and i downloaded catalyst 12.13 from here http://www.techspot.com/drivers/driver/file/information/17157/ i'm not getting errors but msi afterburner still show version 14.4 , and cpd is 1.5 for a single 7950 . could you give me a link where to download 13.12 i think the link i downloaded from is not the right one
I was mainly concerned the max diff hasn't risen after finding 10ch. I thought I read that if max diff isn't above current diff then I have no chance at finding a block. Just dknow what makes the max diff rise.
You mean max diff like in
Tue May 13 22:46:12 2014
New Block: 542038 - Current Diff: 10.942038
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.531706
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 4926K] [ 4944] [ 573] [ 57] [ 5] [ 0] [ 0]
ch/h: [ 169920] [170.522] [ 19.763] [ 1.966] [ 0.172] [ 0.000] [ 0.000]
Estimated CPD: 4.8297, Average CPD: 4.1389, Mining time: 28:59
------------------------------------------------------------------------------
It's just max diff of chains your miner found. So if it's lower than current diff then you haven't found any blocks yet.
Hello! Is there a win miner wich supports Nvidia ? I have 4 gtx 750 Ti. Can i mine somth with those? Thanks!
Is it support lowend card like 7790 ? 
Absolutely, I have 5 msi 7790s on claymore v8 right now, 3 solo and 2 on ypool. They are each getting ~64000 4ch/hr, and estimated 1.95 CPD. With 3 of them solo for the past 40 hours or so I've mined 2 blocks so far. Not officially supported but they work more than well IMO. My clocks are set to 1050/1000
am i in the right way ??
Catalyst 14.4 on your screenshot
Even 270X must show CPD about 3.0. Install 13.12, use AMD Clean-up utility if you have any problems with it.
So I have found a total of twenty 10ch but only 1 block. 2 of my cards have been stuck at the same max diff for over 15 hours now after finding more than four 10ch each.
I just am just curios if I am wasting my time so I can move on to something else if needed.
I just am just curios if I am wasting my time so I can move on to something else if needed.
With difficulty 10.94 now only 6 in 100 10ch will be valid blocks. Do you realise that? I think that CPD 10 (for example) will give per day about 1 11ch block and 0.6 10ch (with diff > 10.94) blocks. Someone correct me if I'm wrong.
Had no idea. Thanks.
I was mainly concerned the max diff hasn't risen after finding 10ch. I thought I read that if max diff isn't above current diff then I have no chance at finding a block. Just dknow what makes the max diff rise.
So I have found a total of twenty 10ch but only 1 block. 2 of my cards have been stuck at the same max diff for over 15 hours now after finding more than four 10ch each.
I just am just curios if I am wasting my time so I can move on to something else if needed.
I just am just curios if I am wasting my time so I can move on to something else if needed.
With difficulty 10.94 now only 6 in 100 10ch will be valid blocks. Do you realise that? I think that CPD 10 (for example) will give per day about 1 11ch block and 0.6 10ch (with diff > 10.94) blocks. Someone correct me if I'm wrong.
am i in the right way ?? 
13.12 shouldnt be showing that warning... i used to get those from 14.xx drivers... try using amduninstall utility http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx and reinstall 13.12 from scratch..
Hello
I`m using 14.4 catalyst, and without problem. everything is working like a charm. I am using a week or more...
i 'm back using 13.12 now but warning keep shiwing in start , something like "linking 2 modules of different target triples , i don't know what is that
now i'm with 3 7950 cards , they are showing like 1.3 cpd each one , with a config -ss 2 and each bat has his own address . is it good or bad ??
If you read the readme!!!.txt you must see:
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Hello
I`m using 14.4 catalyst, and without problem. everything is working like a charm. I am using a week or more...
i 'm back using 13.12 now but warning keep shiwing in start , something like "linking 2 modules of different target triples , i don't know what is that
now i'm with 3 7950 cards , they are showing like 1.3 cpd each one , with a config -ss 2 and each bat has his own address . is it good or bad ??
So I have found a total of twenty 10ch but only 1 block. 2 of my cards have been stuck at the same max diff for over 15 hours now after finding more than four 10ch each.
I just am just curios if I am wasting my time so I can move on to something else if needed.
I just am just curios if I am wasting my time so I can move on to something else if needed.
If you read the readme!!!.txt you must see:
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Hello
I`m using 14.4 catalyst, and without problem. everything is working like a charm. I am using a week or more...
i 'm back using 13.12 now but warning keep shiwing in start , something like "linking 2 modules of different target triples , i don't know what is that
now i'm with 3 7950 cards , they are showing like 1.3 cpd each one , with a config -ss 2 and each bat has his own address . is it good or bad ??
Jump to: