after v 3.1 solo you don't need "Primecoin wallet Claymore Solo Edition"
readme!!.txt help for you! read it all text!
Topic: Claymore XPM GPU Miner discussion - page 18. (Read 142124 times)
Claymore , where can i download the "Primecoin wallet Claymore Solo Edition" i cant find the link 
Is it support lowend card like 7790 ?
Works with all GCN cards. It will work on that 7790, but not very fast.
Is it support lowend card like 7790 ?
If you read the readme!!!.txt you must see:
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Hello
I`m using 14.4 catalyst, and without problem. everything is working like a charm. I am using a week or more...
If you read the readme!!!.txt you must see:
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
oh thank you , i will try it
If you read the readme!!!.txt you must see:
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
Catalyst 13.12 is highly recommended for best performance and compatibility!
in your *.bat write like this:
setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD
try also add parametrs to miner string "-ss 3" or "-ss2"
hello everybody , i have catalyst 14.12 and i have downloaded claymore , in the .bat file i set up all good and i start mining , with 7950 when i start it's complaining about a lot of thing i don't undertsand and it start mining , i see 0.7 cpd in estimated , i don't know where i have to write cpu_max_alloc_percent cause i was using linux before , could someone tell me what's the problem ?
Been runnig a R9 280x for 23 hours now. CPD is 4.6375 and I have found 8 10ch but my max difficulty has stayed at 10.770764 since the 3rd 10ch I have found.
Using an Intel Xeon L5520 here is my bat: NsXpmMiner.exe -o localhost:7332 -u YourLogin -p YourPassword -xpm "my wallet address" -di 0 Using version 8.0 solo.
Anything I might be able to change or add?
Using an Intel Xeon L5520 here is my bat: NsXpmMiner.exe -o localhost:7332 -u YourLogin -p YourPassword -xpm "my wallet address" -di 0 Using version 8.0 solo.
Anything I might be able to change or add?
is there any setting changes or updates needed when we hit 11 difficulty?
Seems like MEM frequency doesn't matter on v8 miner. TRT on 1500Mhz is 113, on 700Mhz the same 113 on R9 290x.
GPUs are a bit colder with low MEM.
GPUs are a bit colder with low MEM.
is there GPU miner which works on older radeons? 
xpmclminer support Radeon HD5xxx/6xxx and NVidia GPUs.
is there GPU miner which works on older radeons?
There're open source miners now. Perhaps someone is going to code something for older cards soon.
is there GPU miner which works on older radeons?
Is there some kind of calculator?
Eg, testing GPU miner atm but have no idea in terms of XPM what to expect
Is this normal?
7 min of work and not a single share?!
The card is 6970
Eg, testing GPU miner atm but have no idea in terms of XPM what to expect
Code:
Mon May 12 13:35:58 2014
New Block: 538711 - Current Diff: 10.923408
Total/Valid shares: [ 0 / 0 ] - Max diff: 0.000000
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 0K] [ 0] [ 0] [ 0] [ 0] [ 0] [ 0]
ch/h: [ 0] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 189.7915, Average CPD: 0.0000, Mining time: 00:07
══════════════════════════════════════════════════════════════════════════════
7 min of work and not a single share?!
The card is 6970
Sad to say but the 6xxx cards are not supported.
Is there some kind of calculator?
Eg, testing GPU miner atm but have no idea in terms of XPM what to expect
Is this normal?
7 min of work and not a single share?!
The card is 6970
Eg, testing GPU miner atm but have no idea in terms of XPM what to expect
Code:
Mon May 12 13:35:58 2014
New Block: 538711 - Current Diff: 10.923408
Total/Valid shares: [ 0 / 0 ] - Max diff: 0.000000
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 0K] [ 0] [ 0] [ 0] [ 0] [ 0] [ 0]
ch/h: [ 0] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 189.7915, Average CPD: 0.0000, Mining time: 00:07
══════════════════════════════════════════════════════════════════════════════
7 min of work and not a single share?!
The card is 6970
Hello Claymore. Thanks for the speedup. I have one question. Do you planning to add temp target setting in your miner with auto fan option? i have one card on my rig which is a little bit crazy. around 15 C is hotter than others. with msi afterburner i can adjust fan control but for all cards and separately not. All my fans is at 80% cause of that one crazy card. Thanks
Try user defined software automatic fan control mode. 
this would be good and put solo mining back on track... i feel you still have room to optimize for multi-gpu or multi-core gpus...
Yes. Also I plan multigpu support.
Hello Claymore. Thanks for the speedup. I have one question. Do you planning to add temp target setting in your miner with auto fan option? i have one card on my rig which is a little bit crazy. around 15 C is hotter than others. with msi afterburner i can adjust fan control but for all cards and separately not. All my fans is at 80% cause of that one crazy card. Thanks
Yes. Also I plan multigpu support.
7990 (2x7970) and 280x at same mem/gpuclock have the same performance with v7 version, but different performance (7990 12% slower) in version v8.
This is right? Is possible to apply same optimizations on both?
Thank you Claymore, very good job with v8 miner.
This is right? Is possible to apply same optimizations on both?
Thank you Claymore, very good job with v8 miner.
its not all about the card cpu has an effect to plus have u tried diff settings on the miner
lol stop mining on that pool hit 5 blocks solo since v8
Jump to: