IF YOU USE V10.0 - UPDATE TO V10.1.
- fixed some critical bugs.
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 100. (Read 2145056 times)
That really sucks I will have to buy larger SSDs to increase paging file to get the miner to work.
AMD rx550 not work 
no ASM binary found
no ASM binary found
This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.
Guys if you are getting the "GpuMiner dk2an0 failed" error, be sure to note Claymore's comments above. I was initially getting the same error with my RX480 8GB rig. Lowering to -h 1024 will solve the issue but make the program only see 4GB on my cards. After changing page file to 48GB, the miner runs beautifully with default -h and -dmem settings.
Ellesmere RX480 8GB, same modded BIOS, default miner settings:
CryptoNote Miner 9.7 - 850 H/s
CryptoNote Miner 10 - 987 H/s
Thanks Claymore!
Why I get
"DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining."
"DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining."
It's a bug. I've removed v10.0 and will upload v10.1 in a few minutes. I made too many changes in this version, bugs are quite possible.
And where is the sample setup for production: XMR + Zec?
Vega 56 ~1400H/s, -h 1512 -dmem 1, HBM @ 950
XMR-stak gets ~1780
Without HBCC CM gets 1200, XMR-Stak gets 1300
470 8GB 1750 strap, -mclock 2040, ~752H/s, testing stability
9.7 was like 680-700, but unstable.
For some reason 5th card won't enable HBCC, have 4GB ram, but 64GB pagefile. It won't even enable by itself May need to play musical GPUs
XMR-stak gets ~1780
Without HBCC CM gets 1200, XMR-Stak gets 1300
470 8GB 1750 strap, -mclock 2040, ~752H/s, testing stability
9.7 was like 680-700, but unstable.
For some reason 5th card won't enable HBCC, have 4GB ram, but 64GB pagefile. It won't even enable by itself
May need to play musical GPUsI've had an issue with HBCC and more than 5 cards whether the 5th card is an R9, RX or Vega. I've stuck with 4 Vega and have it running with HBCC successfully. Let me know if GPU placement resolves this.
Why I get
"DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining."
"DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining."
Vega 56 ~1400H/s, -h 1512 -dmem 1, HBM @ 950
XMR-stak gets ~1780
Without HBCC CM gets 1200, XMR-Stak gets 1300
470 8GB 1750 strap, -mclock 2040, ~752H/s, testing stability
9.7 was like 680-700, but unstable.
For some reason 5th card won't enable HBCC, have 4GB ram, but 64GB pagefile. It won't even enable by itself May need to play musical GPUs
XMR-stak gets ~1780
Without HBCC CM gets 1200, XMR-Stak gets 1300
470 8GB 1750 strap, -mclock 2040, ~752H/s, testing stability
9.7 was like 680-700, but unstable.
For some reason 5th card won't enable HBCC, have 4GB ram, but 64GB pagefile. It won't even enable by itself
May need to play musical GPUs
vega56 here, -dmem 1 with hbcc on results in artifacting with default -h due to more mem than on GPU. I changed it to -h 1800 and it's stable. -h 1900 = artifacting even though it's below 8GB. Max hashrate regardless of setting is 1500H/s.
virtual memory 32GB
virtual memory 32GB
same error as above
GpuMiner dk2an0 failed -4
if I add -h 832 to the config half the cards stop erroring.
I really don't understand how this works. I have a mix of RX 570 / 580s 4gb and 8gb
GpuMiner dk2an0 failed -4
if I add -h 832 to the config half the cards stop erroring.
I really don't understand how this works. I have a mix of RX 570 / 580s 4gb and 8gb
Thanks a lot Claymore for this new release. I've been waiting hoping for it to be the magical hashing booster grail 
Unfortunately, after trying all sorts of -h -dmem combination, I can't get higher rates that what sgminer is already giving. Most of my rigs run 580 polaris cards.
I'll try again on your future releases. Keep up the good work
Unfortunately, after trying all sorts of -h -dmem combination, I can't get higher rates that what sgminer is already giving. Most of my rigs run 580 polaris cards.
I'll try again on your future releases. Keep up the good work
just to be absolutely clear you removed support for 6xxx series 1gb GPU's ??
thanks
thanks
RX480 8Gb
core=1300
mem=2055 (Samsung ,ubermix3.1)
Claymore's CryptoNote 9.7 - 980 H/s
Claymore's CryptoNote 10 - 1020 H/s
Good. I wait for an option for dual mining.
core=1300
mem=2055 (Samsung ,ubermix3.1)
Claymore's CryptoNote 9.7 - 980 H/s
Claymore's CryptoNote 10 - 1020 H/s
Good. I wait for an option for dual mining.
Version 10 not compatible with nicehash , unsecure and ssl connection always reject shares with error "..invalid nonce ... is it nicehash comapatible.. " 9.7 was working fine ?
I will check it.
v10.0 BETA:
- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available.
- new assembler GPU kernels are used.
- added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode.
- some old options were removed, some were renamed, please read Readme for detailed information and samples.
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
- devfee mining is executed every hour, similar to dual and zec miners.
- a lot of minor improvements.
PS. Linux version will be available in a day.
- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available.
- new assembler GPU kernels are used.
- added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode.
- some old options were removed, some were renamed, please read Readme for detailed information and samples.
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
- devfee mining is executed every hour, similar to dual and zec miners.
- a lot of minor improvements.
PS. Linux version will be available in a day.
@Claymore . Thanks a lot for this new version . it work perfectly now on my RIGs..
Can you please Add dual mining option for this miner .. it will be perfecto if you add that feature .
Version 10 not compatible with nicehash , unsecure and ssl connection always reject shares with error "..invalid nonce ... is it nicehash comapatible.. " 9.7 was working fine ?
Code:
XMR: put share nonce 4135
22:17:28:566 1160 XMR round found 1 shares
22:17:28:582 808 XMR: 09/29/17-22:17:28 - SHARE FOUND - (GPU 0)
22:17:28:582 808 send: {"method": "submit", "params": {"id": "881214982452998", "job_id": "0000000a8d20e65b", "nonce": "35410000", "result": "c6573518b0afcb2173e5ecfed3630f38a8af6e4954264d348f7e1cdb8d6d0000"}, "id":4}
22:17:28:675 808 got 110 bytes
22:17:28:675 808 buf: {"id":4,"jsonrpc":"2.0","error":{"code":5,"message":"Invalid nonce; is miner not compatible with NiceHash?"}}
22:17:28:691 808 parse packet: 102
22:17:28:691 808 Share rejected (93 ms)!
22:17:28:706 808 {"id":4,"jsonrpc":"2.0","error":{"code":5,"message":"Invalidnonce;isminernotcompatiblewithNiceHash?"}}
22:17:28:566 1160 XMR round found 1 shares
22:17:28:582 808 XMR: 09/29/17-22:17:28 - SHARE FOUND - (GPU 0)
22:17:28:582 808 send: {"method": "submit", "params": {"id": "881214982452998", "job_id": "0000000a8d20e65b", "nonce": "35410000", "result": "c6573518b0afcb2173e5ecfed3630f38a8af6e4954264d348f7e1cdb8d6d0000"}, "id":4}
22:17:28:675 808 got 110 bytes
22:17:28:675 808 buf: {"id":4,"jsonrpc":"2.0","error":{"code":5,"message":"Invalid nonce; is miner not compatible with NiceHash?"}}
22:17:28:691 808 parse packet: 102
22:17:28:691 808 Share rejected (93 ms)!
22:17:28:706 808 {"id":4,"jsonrpc":"2.0","error":{"code":5,"message":"Invalidnonce;isminernotcompatiblewithNiceHash?"}}
This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.
Same here with 6 480 8gb, previous version is ok
21:38:34:118 ec8 args: -xpool stratum+tcp://xmr-eu.dwarfpool.com:8005 -xwal 449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6 -xpsw x
21:38:34:123 ec8
21:38:34:130 ec8 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
21:38:34:135 ec8 є Claymore's CryptoNote AMD GPU Miner v10.0 Beta є
21:38:34:142 ec8 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
21:38:34:146 ec8
21:38:34:353 ec8 XMR: 1 pool is specified
21:38:34:359 ec8 Main Monero pool is xmr-eu.dwarfpool.com:8005
21:38:35:855 ec8 OpenCL platform: AMD Accelerated Parallel Processing
21:38:35:865 ec8 OpenCL initializing...
21:38:35:870 ec8 driver 10, 0, 2117, 13
21:38:35:876 ec8 AMD Cards available: 6
21:38:35:881 ec8 GPU #0: Ellesmere, 8192 MB available, 36 compute units
21:38:35:886 ec8 GPU #0 recognized as Radeon RX 480/580
21:38:35:891 ec8 card 0, m1 8192, m2 4048 w 288
21:38:35:895 ec8 0 m = 2
21:38:35:900 ec8 GPU #1: Ellesmere, 8192 MB available, 36 compute units
21:38:35:905 ec8 GPU #1 recognized as Radeon RX 480/580
21:38:35:910 ec8 card 1, m1 8192, m2 4048 w 288
21:38:35:914 ec8 1 m = 2
21:38:35:919 ec8 GPU #2: Ellesmere, 8192 MB available, 36 compute units
21:38:35:925 ec8 GPU #2 recognized as Radeon RX 480/580
21:38:35:929 ec8 card 2, m1 8192, m2 4048 w 288
21:38:35:933 ec8 2 m = 2
21:38:35:938 ec8 GPU #3: Ellesmere, 8192 MB available, 36 compute units
21:38:35:944 ec8 GPU #3 recognized as Radeon RX 480/580
21:38:35:949 ec8 card 3, m1 8192, m2 4048 w 288
21:38:35:953 ec8 3 m = 2
21:38:35:959 ec8 GPU #4: Ellesmere, 8192 MB available, 36 compute units
21:38:35:966 ec8 GPU #4 recognized as Radeon RX 480/580
21:38:35:971 ec8 card 4, m1 8192, m2 4048 w 288
21:38:35:975 ec8 4 m = 2
21:38:35:982 ec8 GPU #5: Ellesmere, 8192 MB available, 36 compute units
21:38:35:988 ec8 GPU #5 recognized as Radeon RX 480/580
21:38:35:993 ec8 card 5, m1 8192, m2 4048 w 288
21:38:35:997 ec8 5 m = 2
21:38:36:002 ec8 POOL version
21:38:36:007 ec8 b137
21:38:36:011 ec8 Platform: Windows
21:38:36:131 ec8 start building OpenCL program for GPU 0...
21:38:36:136 ec8 done
21:38:36:355 ec8 start building OpenCL program for GPU 1...
21:38:36:360 ec8 done
21:38:36:575 ec8 start building OpenCL program for GPU 2...
21:38:36:600 ec8 done
21:38:36:817 ec8 start building OpenCL program for GPU 3...
21:38:36:832 ec8 done
21:38:37:049 ec8 start building OpenCL program for GPU 4...
21:38:37:067 ec8 done
21:38:37:288 ec8 start building OpenCL program for GPU 5...
21:38:37:297 ec8 done
21:38:37:927 ec8 GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:38:298 ec8 GPU #1 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:38:657 ec8 GPU #2 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:38:995 ec8 GPU #3 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:39:344 ec8 GPU #4 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:39:709 ec8 GPU #5 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:39:715 ec8 Total cards: 6
21:38:49:781 a64 XMR: Stratum - connecting to 'xmr-eu.dwarfpool.com' <178.32.196.217> port 8005 (unsecure)
21:38:49:838 a64 send: {"method": "login", "params": {"login": "449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6", "pass": "x", "agent": "xmr/1.0"}, "id": 1}
21:38:49:856 a64 XMR: Stratum - Connected (xmr-eu.dwarfpool.com:8005) (unsecure)
21:38:49:879 ec8 Watchdog enabled
21:38:49:896 ec8 Remote management (READ-ONLY MODE) is enabled on port 3333
21:38:49:907 ec8
21:38:49:909 a64 got 303 bytes
21:38:49:918 a64 buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"294013352040201","job":{"blob":"0606c0a5bace0506b7ef3419c2efc6732de265b97a624c6bf9d9174f7648e0374d618ae3b0c62b0 0000000be9df88ccf899c6bb9f6c4f2a767854d88a4181d68c05e50da5369126ff1268604","job_id":"151608760631643","target":"dc460300"},"status":"OK"}}
21:38:49:923 a64 parse packet: 302
21:38:49:928 a64 new buf size: 0
21:38:50:808 518 GPU 4, GpuMiner dk2a failed -4
21:38:50:855 13c8 GPU 5, GpuMiner dk1a failed -4
21:38:51:080 78c GPU 1, GpuMiner dk1a failed -4
21:38:51:101 e90 GPU 4, GpuMiner dk2an0 failed -4
21:38:51:129 13c0 GPU 5, GpuMiner dk2an0 failed -4
21:38:51:151 12c8 GPU 1, GpuMiner dk2an0 failed -4
21:38:51:163 1074 GPU 2, GpuMiner dk2a failed -4
21:38:51:177 1490 GPU 4, GpuMiner dk2an0 failed -4
21:38:51:196 c9c GPU 2, GpuMiner dk2an0 failed -4
21:38:51:206 12c4 GPU 1, GpuMiner dk2an0 failed -4
21:38:51:221 ccc GPU 5, GpuMiner dk2an0 failed -4
21:38:51:234 95c GPU 0, GpuMiner dk2a failed -4
21:38:51:249 bac GPU 2, GpuMiner dk2an0 failed -4
21:38:51:271 984 GPU 5, GpuMiner dk2an0 failed -4
21:38:51:296 15b8 GPU 2, GpuMiner dk2an0 failed -4
21:38:51:306 d80 GPU 0, GpuMiner dk2an0 failed -4
21:38:51:318 1164 GPU 1, GpuMiner dk2an0 failed -4
21:38:51:327 1650 GPU 3, GpuMiner dk2a failed -4
21:38:51:336 16a4 GPU 4, GpuMiner dk2an0 failed -4
21:38:51:354 5cc GPU 0, GpuMiner dk2an0 failed -4
21:38:51:377 17bc GPU 3, GpuMiner dk2an0 failed -4
21:38:51:398 d4c GPU 3, GpuMiner dk2an0 failed -4
21:38:51:434 8bc GPU 3, GpuMiner dk2an0 failed -4
21:38:51:444 474 GPU 0, GpuMiner dk2an0 failed -4
21:39:21:253 ec8 GPU0 t=35C fan=97%, GPU1 t=35C fan=96%, GPU2 t=40C fan=98%, GPU3 t=33C fan=96%, GPU4 t=36C fan=97%, GPU5 t=29C fan=96%
21:39:21:259 ec8 em hbt: 0, fm hbt: 0,
21:39:21:264 ec8 watchdog - thread 0, hb time 31047
21:39:21:269 ec8 watchdog - thread 1, hb time 31328
21:39:21:275 ec8 watchdog - thread 2, hb time 31328
21:39:21:280 ec8 watchdog - thread 3, hb time 31328
21:39:21:285 ec8 watchdog - thread 4, hb time 31328
21:39:21:290 ec8 watchdog - thread 5, hb time 31328
21:39:21:296 ec8 watchdog - thread 6, hb time 31328
21:39:21:302 ec8 watchdog - thread 7, hb time 31109
21:39:21:308 ec8 watchdog - thread 8, hb time 31328
21:39:21:313 ec8 watchdog - thread 9, hb time 31328
21:39:21:318 ec8 watchdog - thread 10, hb time 31328
21:39:21:323 ec8 watchdog - thread 11, hb time 31125
21:39:21:327 ec8 watchdog - thread 12, hb time 31328
21:39:21:332 ec8 watchdog - thread 13, hb time 31328
21:39:21:338 ec8 watchdog - thread 14, hb time 31328
21:39:21:343 ec8 watchdog - thread 15, hb time 31265
21:39:21:347 ec8 watchdog - thread 16, hb time 31328
21:39:21:352 ec8 watchdog - thread 17, hb time 31281
21:39:21:357 ec8 watchdog - thread 18, hb time 31328
21:39:21:362 ec8 watchdog - thread 19, hb time 31328
21:39:21:367 ec8 watchdog - thread 20, hb time 31328
21:39:21:372 ec8 watchdog - thread 21, hb time 31328
21:39:21:377 ec8 watchdog - thread 22, hb time 31328
21:39:21:382 ec8 watchdog - thread 23, hb time 31312
21:39:21:387 ec8 WATCHDOG: GPU error, you need to restart miner
21:39:22:992 ec8 Restarting OK, exit...
21:38:34:118 ec8 args: -xpool stratum+tcp://xmr-eu.dwarfpool.com:8005 -xwal 449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6 -xpsw x
21:38:34:123 ec8
21:38:34:130 ec8 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
21:38:34:135 ec8 є Claymore's CryptoNote AMD GPU Miner v10.0 Beta є
21:38:34:142 ec8 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
21:38:34:146 ec8
21:38:34:353 ec8 XMR: 1 pool is specified
21:38:34:359 ec8 Main Monero pool is xmr-eu.dwarfpool.com:8005
21:38:35:855 ec8 OpenCL platform: AMD Accelerated Parallel Processing
21:38:35:865 ec8 OpenCL initializing...
21:38:35:870 ec8 driver 10, 0, 2117, 13
21:38:35:876 ec8 AMD Cards available: 6
21:38:35:881 ec8 GPU #0: Ellesmere, 8192 MB available, 36 compute units
21:38:35:886 ec8 GPU #0 recognized as Radeon RX 480/580
21:38:35:891 ec8 card 0, m1 8192, m2 4048 w 288
21:38:35:895 ec8 0 m = 2
21:38:35:900 ec8 GPU #1: Ellesmere, 8192 MB available, 36 compute units
21:38:35:905 ec8 GPU #1 recognized as Radeon RX 480/580
21:38:35:910 ec8 card 1, m1 8192, m2 4048 w 288
21:38:35:914 ec8 1 m = 2
21:38:35:919 ec8 GPU #2: Ellesmere, 8192 MB available, 36 compute units
21:38:35:925 ec8 GPU #2 recognized as Radeon RX 480/580
21:38:35:929 ec8 card 2, m1 8192, m2 4048 w 288
21:38:35:933 ec8 2 m = 2
21:38:35:938 ec8 GPU #3: Ellesmere, 8192 MB available, 36 compute units
21:38:35:944 ec8 GPU #3 recognized as Radeon RX 480/580
21:38:35:949 ec8 card 3, m1 8192, m2 4048 w 288
21:38:35:953 ec8 3 m = 2
21:38:35:959 ec8 GPU #4: Ellesmere, 8192 MB available, 36 compute units
21:38:35:966 ec8 GPU #4 recognized as Radeon RX 480/580
21:38:35:971 ec8 card 4, m1 8192, m2 4048 w 288
21:38:35:975 ec8 4 m = 2
21:38:35:982 ec8 GPU #5: Ellesmere, 8192 MB available, 36 compute units
21:38:35:988 ec8 GPU #5 recognized as Radeon RX 480/580
21:38:35:993 ec8 card 5, m1 8192, m2 4048 w 288
21:38:35:997 ec8 5 m = 2
21:38:36:002 ec8 POOL version
21:38:36:007 ec8 b137
21:38:36:011 ec8 Platform: Windows
21:38:36:131 ec8 start building OpenCL program for GPU 0...
21:38:36:136 ec8 done
21:38:36:355 ec8 start building OpenCL program for GPU 1...
21:38:36:360 ec8 done
21:38:36:575 ec8 start building OpenCL program for GPU 2...
21:38:36:600 ec8 done
21:38:36:817 ec8 start building OpenCL program for GPU 3...
21:38:36:832 ec8 done
21:38:37:049 ec8 start building OpenCL program for GPU 4...
21:38:37:067 ec8 done
21:38:37:288 ec8 start building OpenCL program for GPU 5...
21:38:37:297 ec8 done
21:38:37:927 ec8 GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:38:298 ec8 GPU #1 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:38:657 ec8 GPU #2 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:38:995 ec8 GPU #3 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:39:344 ec8 GPU #4 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:39:709 ec8 GPU #5 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:38:39:715 ec8 Total cards: 6
21:38:49:781 a64 XMR: Stratum - connecting to 'xmr-eu.dwarfpool.com' <178.32.196.217> port 8005 (unsecure)
21:38:49:838 a64 send: {"method": "login", "params": {"login": "449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6", "pass": "x", "agent": "xmr/1.0"}, "id": 1}
21:38:49:856 a64 XMR: Stratum - Connected (xmr-eu.dwarfpool.com:8005) (unsecure)
21:38:49:879 ec8 Watchdog enabled
21:38:49:896 ec8 Remote management (READ-ONLY MODE) is enabled on port 3333
21:38:49:907 ec8
21:38:49:909 a64 got 303 bytes
21:38:49:918 a64 buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"294013352040201","job":{"blob":"0606c0a5bace0506b7ef3419c2efc6732de265b97a624c6bf9d9174f7648e0374d618ae3b0c62b0 0000000be9df88ccf899c6bb9f6c4f2a767854d88a4181d68c05e50da5369126ff1268604","job_id":"151608760631643","target":"dc460300"},"status":"OK"}}
21:38:49:923 a64 parse packet: 302
21:38:49:928 a64 new buf size: 0
21:38:50:808 518 GPU 4, GpuMiner dk2a failed -4
21:38:50:855 13c8 GPU 5, GpuMiner dk1a failed -4
21:38:51:080 78c GPU 1, GpuMiner dk1a failed -4
21:38:51:101 e90 GPU 4, GpuMiner dk2an0 failed -4
21:38:51:129 13c0 GPU 5, GpuMiner dk2an0 failed -4
21:38:51:151 12c8 GPU 1, GpuMiner dk2an0 failed -4
21:38:51:163 1074 GPU 2, GpuMiner dk2a failed -4
21:38:51:177 1490 GPU 4, GpuMiner dk2an0 failed -4
21:38:51:196 c9c GPU 2, GpuMiner dk2an0 failed -4
21:38:51:206 12c4 GPU 1, GpuMiner dk2an0 failed -4
21:38:51:221 ccc GPU 5, GpuMiner dk2an0 failed -4
21:38:51:234 95c GPU 0, GpuMiner dk2a failed -4
21:38:51:249 bac GPU 2, GpuMiner dk2an0 failed -4
21:38:51:271 984 GPU 5, GpuMiner dk2an0 failed -4
21:38:51:296 15b8 GPU 2, GpuMiner dk2an0 failed -4
21:38:51:306 d80 GPU 0, GpuMiner dk2an0 failed -4
21:38:51:318 1164 GPU 1, GpuMiner dk2an0 failed -4
21:38:51:327 1650 GPU 3, GpuMiner dk2a failed -4
21:38:51:336 16a4 GPU 4, GpuMiner dk2an0 failed -4
21:38:51:354 5cc GPU 0, GpuMiner dk2an0 failed -4
21:38:51:377 17bc GPU 3, GpuMiner dk2an0 failed -4
21:38:51:398 d4c GPU 3, GpuMiner dk2an0 failed -4
21:38:51:434 8bc GPU 3, GpuMiner dk2an0 failed -4
21:38:51:444 474 GPU 0, GpuMiner dk2an0 failed -4
21:39:21:253 ec8 GPU0 t=35C fan=97%, GPU1 t=35C fan=96%, GPU2 t=40C fan=98%, GPU3 t=33C fan=96%, GPU4 t=36C fan=97%, GPU5 t=29C fan=96%
21:39:21:259 ec8 em hbt: 0, fm hbt: 0,
21:39:21:264 ec8 watchdog - thread 0, hb time 31047
21:39:21:269 ec8 watchdog - thread 1, hb time 31328
21:39:21:275 ec8 watchdog - thread 2, hb time 31328
21:39:21:280 ec8 watchdog - thread 3, hb time 31328
21:39:21:285 ec8 watchdog - thread 4, hb time 31328
21:39:21:290 ec8 watchdog - thread 5, hb time 31328
21:39:21:296 ec8 watchdog - thread 6, hb time 31328
21:39:21:302 ec8 watchdog - thread 7, hb time 31109
21:39:21:308 ec8 watchdog - thread 8, hb time 31328
21:39:21:313 ec8 watchdog - thread 9, hb time 31328
21:39:21:318 ec8 watchdog - thread 10, hb time 31328
21:39:21:323 ec8 watchdog - thread 11, hb time 31125
21:39:21:327 ec8 watchdog - thread 12, hb time 31328
21:39:21:332 ec8 watchdog - thread 13, hb time 31328
21:39:21:338 ec8 watchdog - thread 14, hb time 31328
21:39:21:343 ec8 watchdog - thread 15, hb time 31265
21:39:21:347 ec8 watchdog - thread 16, hb time 31328
21:39:21:352 ec8 watchdog - thread 17, hb time 31281
21:39:21:357 ec8 watchdog - thread 18, hb time 31328
21:39:21:362 ec8 watchdog - thread 19, hb time 31328
21:39:21:367 ec8 watchdog - thread 20, hb time 31328
21:39:21:372 ec8 watchdog - thread 21, hb time 31328
21:39:21:377 ec8 watchdog - thread 22, hb time 31328
21:39:21:382 ec8 watchdog - thread 23, hb time 31312
21:39:21:387 ec8 WATCHDOG: GPU error, you need to restart miner
21:39:22:992 ec8 Restarting OK, exit...
Jump to: