Claymore's CryptoNote AMD GPU Miner v11.3 - page 102.

cvsea

member

Activity: 112

Merit: 10

https://imgur.com/a/nIh2f

+ miner not compatible with nicehash
+ windows error message that system is out of memory

Code:


21:12:43:583	12f4	args: -xpool stratum+ssl://cryptonight.eu.nicehash.com:33355 -xwal wallet -xpsw x -allpools 1 
21:12:43:585	12f4	
21:12:43:586	12f4	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:12:43:587	12f4	º         Claymore's CryptoNote AMD GPU Miner v10.0 Beta         º
21:12:43:588	12f4	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
21:12:43:589	12f4	
21:12:43:796	12f4	XMR: 1 pool is specified
21:12:43:801	12f4	Main Monero pool is cryptonight.eu.nicehash.com:33355
21:12:44:397	12f4	OpenCL platform: AMD Accelerated Parallel Processing
21:12:44:400	12f4	OpenCL initializing...
21:12:44:402	12f4	driver 10.0.2442.10
21:12:44:403	12f4	AMD Cards available: 4 
21:12:44:404	12f4	GPU #0: Ellesmere, 8192 MB available, 32 compute units
21:12:44:405	12f4	GPU #0 recognized as Radeon RX 470/570
21:12:44:406	12f4	card 0, m1 8192, m2 4048 w 256
21:12:44:407	12f4	0 m = 2
21:12:44:408	12f4	GPU #1: Ellesmere, 8192 MB available, 36 compute units
21:12:44:409	12f4	GPU #1 recognized as Radeon RX 480/580
21:12:44:410	12f4	card 1, m1 8192, m2 4048 w 288
21:12:44:411	12f4	1 m = 2
21:12:44:412	12f4	GPU #2: Ellesmere, 8192 MB available, 32 compute units
21:12:44:413	12f4	GPU #2 recognized as Radeon RX 470/570
21:12:44:414	12f4	card 2, m1 8192, m2 4048 w 256
21:12:44:416	12f4	2 m = 2
21:12:44:417	12f4	GPU #3: Ellesmere, 8192 MB available, 36 compute units
21:12:44:418	12f4	GPU #3 recognized as Radeon RX 480/580
21:12:44:419	12f4	card 3, m1 8192, m2 4048 w 288
21:12:44:420	12f4	3 m = 2
21:12:44:421	12f4	POOL version
21:12:44:422	12f4	b137 
21:12:44:423	12f4	Platform: Windows
21:12:44:557	12f4	start building OpenCL program for GPU 0...
21:12:44:559	12f4	done
21:12:44:766	12f4	start building OpenCL program for GPU 1...
21:12:44:771	12f4	done
21:12:44:981	12f4	start building OpenCL program for GPU 2...
21:12:44:986	12f4	done
21:12:45:195	12f4	start building OpenCL program for GPU 3...
21:12:45:201	12f4	done
21:12:45:828	12f4	GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:12:46:179	12f4	GPU #1 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:12:46:494	12f4	GPU #2 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:12:46:847	12f4	GPU #3 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
21:12:46:849	12f4	Total cards: 4 
21:12:59:046	4b0	XMR: Stratum - connecting to 'cryptonight.eu.nicehash.com' <37.58.117.214> port 33355 (SSL/TLS)
21:12:59:122	12f4	"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
21:12:59:126	12f4	Watchdog enabled
21:12:59:129	12f4	Remote management (READ-ONLY MODE) is enabled on port 3333
21:12:59:134	12f4	

21:12:59:203	4b0	cert subject: /C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/[email protected]
21:12:59:205	4b0	cert issuer: /C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/[email protected]
21:12:59:207	4b0	SSL/TLS encryption is enabled
21:12:59:208	4b0	send: {"method": "login", "params": {"login": "1HqTJpftRmzfUqv7bGB9YniAHJxSrjNWhU.cl", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

21:12:59:210	4b0	XMR: Stratum - Connected (cryptonight.eu.nicehash.com:33355) (SSL/TLS)
21:12:59:376	4b0	got 304 bytes
21:12:59:379	4b0	buf: {"jsonrpc":"2.0","id":1,"error":null,"result":{"id":"152761423221685","status":"OK","job":{"job_id":"0000000a8cc8f02f","blob":"0606de97bace0524a0852338d2a58f01ed52dd6e05f09a8eb800581403ea11cd990d16cc3ea1af0000008eba0a3597c94b28619966aedc240bac385e4689d6ef0bf7d7090c96731569b92d05","target":"b7d10000"}}}

21:12:59:382	4b0	parse packet: 303
21:12:59:386	4b0	new buf size: 0
21:12:59:944	1af0	GPU 2, GpuMiner dk2a failed -4
21:12:59:957	1e24	GPU 2, GpuMiner dk2an0 failed -4
21:12:59:969	1cdc	GPU 2, GpuMiner dk2an0 failed -4
21:13:00:009	c68	GPU 0, GpuMiner dk2a failed -4
21:13:00:042	858	GPU 2, GpuMiner dk2an0 failed -4

adaseb

legendary

Activity: 3808

Merit: 1723

Biggest improvement seems to be for the Pitcairn. About 10% faster, if the speed shown is correct.

Tahiti's seem the same

IojkinKot

newbie

Activity: 63

Merit: 0

Error on default settings:
21:02:32:037   1310   GPU 4, GpuMiner dk1a failed -4
21:02:32:076   ce4   GPU 1, GpuMiner dk2a failed -4
21:02:32:113   a20   GPU 0, GpuMiner dk2a failed -4
21:02:32:148   126c   GPU 4, GpuMiner dk2an0 failed -4
21:02:32:220   14e0   GPU 4, GpuMiner dk2an0 failed -4
21:02:32:255   127c   GPU 1, GpuMiner dk2an0 failed -4
21:02:32:305   c7c   GPU 0, GpuMiner dk2an0 failed -4
21:02:32:342   137c   GPU 1, GpuMiner dk2an0 failed -4
21:02:32:385   1330   GPU 3, GpuMiner dk2a failed -4
21:02:32:393   1758   GPU 0, GpuMiner dk2an0 failed -4
21:02:32:409   fcc   GPU 4, GpuMiner dk2an0 failed -4
21:02:32:420   1450   GPU 1, GpuMiner dk2an0 failed -4
21:02:32:436   15f4   GPU 0, GpuMiner dk2an0 failed -4
21:02:32:510   20   GPU 3, GpuMiner dk2an0 failed -4
21:02:32:539   10e0   GPU 3, GpuMiner dk2an0 failed -4
21:02:32:560   1798   GPU 3, GpuMiner dk2an0 failed -4

5x RX 480 8G
Version 9.7 work fine

notbatman

legendary

Activity: 2212

Merit: 1038

oh, windows defender snapped that up right away! Shocked

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: Claymore on September 29, 2017, 12:49:12 PM

v10.0 BETA:

- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available.
- new assembler GPU kernels are used.
- added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode.
- some old options were removed, some were renamed, please read Readme for detailed information and samples.
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
- devfee mining is executed every hour, similar to dual and zec miners.
- a lot of minor improvements.

PS. Linux version will be available in a day.

Thank you can't wait till I get home to try it out its been a minute since you gave this a good update

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v10.0 BETA:

- now miner uses the latest framework which is used for dual and zec miners. Therefore several new options are available.
- new assembler GPU kernels are used.
- added "-dmem" options that can improve performance in many cases. Note that twice more GPU memory is used in this mode.
- some old options were removed, some were renamed, please read Readme for detailed information and samples.
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
- devfee mining is executed every hour, similar to dual and zec miners.
- a lot of minor improvements.

PS. Linux version will be available in a day.

notbatman

legendary

Activity: 2212

Merit: 1038

I think we can mine 5 coins at the same time if claymore includes code like this!

https://github.com/amphibia/fantomcoin/tree/master/src/minerc

There's windows binaries already compiled so I'll see if I can daisy-chain this app under windows and see if it works with the 9.7 miner...

edit:

Of course, no windows minerc binaries included LOL. It's OK windows comes with Ubuntu 16.04 and a c compiler that now! Cheesy

Just type bash in your console and it gets downloaded and installed... I was like WTF...

Code:

Microsoft Windows [Version 10.0.15063]
(c) 2017 Microsoft Corporation. All rights reserved.

C:\Users\Not Batman>bash
130 packages can be updated.
48 updates are security updates.
not@NotBatman-PC:/mnt/c/Users/Not Batman$ uname -r
4.4.0-43-Microsoft
not@NotBatman-PC:/mnt/c/Users/Not Batman$

Dare I log on as root?

Jackkyy

full member

Activity: 252

Merit: 100

See this - all write for how minning monero

https://bitcointalksearch.org/topic/guideamdnvidiacpuxmrhow-to-mine-moneroryo-miners-downloads-2126975

syraka76

member

Activity: 83

Merit: 10

Quote from: Jackkyy on September 29, 2017, 11:08:20 AM

Release but good H/s
now if use 1 thread - = 1650 -xmd-stack
if use 2 thread = 1950 - xmd -stack

but Claymore tell - new version 1200H/s

very bad news

I downloaded the miner -xmd-stack but did not understand how it is used, i do not see the file.exe, how do i create the .bat file? Roll Eyes

Jackkyy

full member

Activity: 252

Merit: 100

Wait soon new version
yesterday tell -after 24h post new version
soon this 24 h end

syraka76

member

Activity: 83

Merit: 10

still no new version? Grin

Jackkyy

full member

Activity: 252

Merit: 100

Release but good H/s
now if use 1 thread - = 1650 -xmd-stack
if use 2 thread = 1950 - xmd -stack

but Claymore tell - new version 1200H/s

very bad news

woodaxe

member

Activity: 129

Merit: 10

well thats 24 hours mr claymore please release the new version most of us dont have vega to worry about

MikeHenderson

jr. member

Activity: 51

Merit: 1

Quote from: Claymore on September 29, 2017, 06:11:56 AM

Quote from: rednoW on September 29, 2017, 05:37:37 AM

Quote from: Claymore on September 29, 2017, 05:14:20 AM

Quote from: rednoW on September 28, 2017, 01:31:57 PM

Quote from: Claymore on September 28, 2017, 01:21:23 PM

Quote from: ytkingo on September 28, 2017, 01:01:42 PM

Hey claymore lets tell us whats the speed for vega 56 and 64

I don't OC GPUs and use stock bios, don't enable HBCC, etc, so I get low speeds. For example, I see 1140H/s for stock Vega64.

That's bad. You'll see 2-thread gain with HBCC only ((( HBCC can be enabled easy with blockchain drivers. But if you have Frontier - that is a problem ))

For HBCC enabled with Vega56 or Vega64 be sure you have enough virtual memory, make clean uninstall of drivers (I used amd utiity), install blockchain drivers again, you will see HBCC slider in Gaming section

Hmm, Vega56 shows about 1400H/s in stock. So it seems Vega56 is faster than Vega64 for my PoW implementation. I really need more time to find the reason, so I will release new version in several hours and then will spend more time for Vega.

It can be that you Vega64 is throttling in stock setting. Try to set fans to the max )))
Vega64 is not a card to run at stock )))))))))))))))
And please - provide more flexibility to tune your miner for the end user.
We need possibility to run it multi-threaded!

Rebooted PC, now drivers show 64 CUs for Vega56 instead of 56 and the speed is only 1100 due to unknown reason... I will include "-h" option to select the number of hashes and "-dmem" to enable double sized memory mode (it's not two threads but it processes two set of hashes at once so it's similar), it works good for Polaris and earlier cards, but Vega is some kind of magic.

Sorry if I missed it in the mega thread, but will your new version support vega frontier edition?

badfad

jr. member

Activity: 186

Merit: 4

Even Claymore is baffled by Vega :-)

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: aistto on September 29, 2017, 06:43:02 AM

Quote from: fr4nkthetank on September 28, 2017, 03:06:49 PM

@Claymore : You need 16gigs of ram for the HBCC slider to be enabled in amd settings, under global settings. Blockchain drivers work fine. xmr-stak-amd gets 1900hs with 2 threads, freq -30%, memory @ 945. Fans must be set to at least 3250 or more for memory to get adequate cooling, even if core temp is cool.
edit: win10

16 gb RAM or virtual memory enough?

Newer investigations show that it is not necessary to have more then 8gig og system RAM, but it is better set 16gb Virtual memory per card.

aistto

legendary

Activity: 1001

Merit: 1005

Quote from: fr4nkthetank on September 28, 2017, 03:06:49 PM

Quote from: Claymore on September 28, 2017, 12:56:31 PM

Quote from: rednoW on September 28, 2017, 12:37:02 PM

Quote from: Claymore on September 28, 2017, 12:29:25 PM

Quote from: rednoW on September 28, 2017, 12:20:58 PM

What is the expected speed for Vega? Can't wait )))

It's just a bit faster than sgminer in my tests, my be you will get different results. The problem of this PoW is in GPU memory, so all tricks don't help much.

To get full Vega speed you need HBCC enabled and 2 or more threads with total memory usage ascending to the upper limit.
Will hope your miner let us configure threads and intensities. We need do break 2kh/s wall ))

I use different approach, so I get best speed in a single thread, two threads have same speed.
I did not try HBCC yet since I test everything on blockchain drivers and I don't see any dialogs with settings at all.

@Claymore : You need 16gigs of ram for the HBCC slider to be enabled in amd settings, under global settings. Blockchain drivers work fine. xmr-stak-amd gets 1900hs with 2 threads, freq -30%, memory @ 945. Fans must be set to at least 3250 or more for memory to get adequate cooling, even if core temp is cool.
edit: win10

16 gb RAM or virtual memory enough?

woodaxe

member

Activity: 129

Merit: 10

Claymore please release new version vega is prolly a minority card and ive been waiting forever for an upgrade

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: rednoW on September 29, 2017, 05:37:37 AM

Quote from: Claymore on September 29, 2017, 05:14:20 AM

Quote from: rednoW on September 28, 2017, 01:31:57 PM

Quote from: Claymore on September 28, 2017, 01:21:23 PM

Quote from: ytkingo on September 28, 2017, 01:01:42 PM

Hey claymore lets tell us whats the speed for vega 56 and 64

I don't OC GPUs and use stock bios, don't enable HBCC, etc, so I get low speeds. For example, I see 1140H/s for stock Vega64.

That's bad. You'll see 2-thread gain with HBCC only ((( HBCC can be enabled easy with blockchain drivers. But if you have Frontier - that is a problem ))

For HBCC enabled with Vega56 or Vega64 be sure you have enough virtual memory, make clean uninstall of drivers (I used amd utiity), install blockchain drivers again, you will see HBCC slider in Gaming section

Hmm, Vega56 shows about 1400H/s in stock. So it seems Vega56 is faster than Vega64 for my PoW implementation. I really need more time to find the reason, so I will release new version in several hours and then will spend more time for Vega.

It can be that you Vega64 is throttling in stock setting. Try to set fans to the max )))
Vega64 is not a card to run at stock )))))))))))))))
And please - provide more flexibility to tune your miner for the end user.
We need possibility to run it multi-threaded!

Rebooted PC, now drivers show 64 CUs for Vega56 instead of 56 and the speed is only 1100 due to unknown reason... I will include "-h" option to select the number of hashes and "-dmem" to enable double sized memory mode (it's not two threads but it processes two set of hashes at once so it's similar), it works good for Polaris and earlier cards, but Vega is some kind of magic.

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Claymore on September 29, 2017, 05:14:20 AM

Quote from: rednoW on September 28, 2017, 01:31:57 PM

Quote from: Claymore on September 28, 2017, 01:21:23 PM

Quote from: ytkingo on September 28, 2017, 01:01:42 PM

Hey claymore lets tell us whats the speed for vega 56 and 64

I don't OC GPUs and use stock bios, don't enable HBCC, etc, so I get low speeds. For example, I see 1140H/s for stock Vega64.

That's bad. You'll see 2-thread gain with HBCC only ((( HBCC can be enabled easy with blockchain drivers. But if you have Frontier - that is a problem ))

For HBCC enabled with Vega56 or Vega64 be sure you have enough virtual memory, make clean uninstall of drivers (I used amd utiity), install blockchain drivers again, you will see HBCC slider in Gaming section

Hmm, Vega56 shows about 1400H/s in stock. So it seems Vega56 is faster than Vega64 for my PoW implementation. I really need more time to find the reason, so I will release new version in several hours and then will spend more time for Vega.

It can be that you Vega64 is throttling in stock setting. Try to set fans to the max )))
Vega64 is not a card to run at stock )))))))))))))))
And please - provide more flexibility to tune your miner for the end user.
We need possibility to run it multi-threaded!

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 102. (Read 2145056 times)