Claymore's CryptoNote AMD GPU Miner v11.3 - page 138.

rinus

sr. member

Activity: 362

Merit: 258

Quote from: Ursul0 on January 26, 2017, 04:36:37 PM

these are the safe numbers for my average ref 480 8GB with 1500 straps:
it does ~740.

[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70

all these numbers , are that settings u put in somewhere? and what do you mean by " 1500 " straps ?

" im still learning a lot about mining

"

Ursul0

sr. member

Activity: 857

Merit: 262

these are the safe numbers for my average ref 480 8GB with 1500 straps:
it does ~740.

[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70

Redcard

newbie

Activity: 28

Merit: 0

Quote from: PlasticStool on January 26, 2017, 03:32:31 PM

I got this same error.
It was because when I C&P the address into the batch file it removed the space between the address and -p x

Just check those two addr:
4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWFNeDcndLq3GwnXRLM
46evMe84XVyeAD9XsQ3G93WtcVQeLpC4P4UKEPMwEhdYRwAo8KKtTrf5DQMitTK8TnWo7EMUxvXjXjW djutnMbf823AbDkR

The longer is from Kraken and the 2nd is from mymonero.com. The space could be a problem as you said but in my case I think the address is strange.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Redcard on January 26, 2017, 03:25:19 PM

Quote from: Ursul0 on January 26, 2017, 03:12:31 PM

Quote from: Redcard on January 26, 2017, 02:08:23 PM

Quote from: Ursul0 on January 26, 2017, 12:19:49 PM

Quote from: Redcard on January 26, 2017, 11:39:01 AM

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

In addition to this problem is I'm not able to fix the crazy fan at normal speed unless I reset the system.
And after one amd driver crash and and reboot the driver has changed from 16.10.3 to 16.6.. but this is another issue.

same here, only the reboot solves this crazy run... it shows over 5000RPM on refs.

Have you tried to set fan rpm max limit with wattool or wattman before it rise to 100% rpm?

it fucks all the limits

PlasticStool

newbie

Activity: 4

Merit: 0

Quote from: Redcard on January 25, 2017, 08:38:12 AM

10:28:48:978   2e80   Stratum - Connected (unsecure)
10:28:48:978   2e80   New connection: reset total hashes counters
10:28:49:062   2e80   got 100 bytes
10:28:49:062   2e80   buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalid address or username used for login"}}

10:28:49:062   2e80   parse packet: 94
10:28:49:062   2e80   Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressorusernameusedforlogin"}}
10:28:49:077   2e80   buf was cleared
10:28:49:077   2e80   Stratum - reading socket failed 10038, disconnect
10:28:49:077   2e80    Job timeout, disconnect, retry in 20 sec...

As username I use xmr address generated in Kraken but why the miner doesn't accept it??

I got this same error.
It was because when I C&P the address into the batch file it removed the space between the address and -p x

Redcard

newbie

Activity: 28

Merit: 0

Quote from: Ursul0 on January 26, 2017, 03:12:31 PM

Quote from: Redcard on January 26, 2017, 02:08:23 PM

Quote from: Ursul0 on January 26, 2017, 12:19:49 PM

Quote from: Redcard on January 26, 2017, 11:39:01 AM

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

In addition to this problem is I'm not able to fix the crazy fan at normal speed unless I reset the system.
And after one amd driver crash and and reboot the driver has changed from 16.10.3 to 16.6.. but this is another issue.

same here, only the reboot solves this crazy run... it shows over 5000RPM on refs.

Have you tried to set fan rpm max limit with wattool or wattman before it rise to 100% rpm?

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Redcard on January 26, 2017, 02:08:23 PM

Quote from: Ursul0 on January 26, 2017, 12:19:49 PM

Quote from: Redcard on January 26, 2017, 11:39:01 AM

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

In addition to this problem is I'm not able to fix the crazy fan at normal speed unless I reset the system.
And after one amd driver crash and and reboot the driver has changed from 16.10.3 to 16.6.. but this is another issue.

same here, only the reboot solves this crazy run... it shows over 5000RPM on refs.

Redcard

newbie

Activity: 28

Merit: 0

Quote from: Ursul0 on January 26, 2017, 12:19:49 PM

Quote from: Redcard on January 26, 2017, 11:39:01 AM

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

In addition to this problem is I'm not able to fix the crazy fan at normal speed unless I reset the system.
And after one amd driver crash and and reboot the driver has changed from 16.10.3 to 16.6.. but this is another issue.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: rinus on January 26, 2017, 10:59:11 AM

Quote from: carlo_0000 on January 26, 2017, 10:47:01 AM

good choice is rx470 or480 depending on what price you get them
but better of with a 5x ring than 6x for my experience

5x ring? What do u mean. What is the hashrate on 470 and 480? Also is there a big difference in hashrate between brands off the 470 or 480

buy 470's Nitros, if it exists with samsung mem and you can get it = the best possible. No need for 8gig
another option is 470 refs (those do come with samsung memory sometimes) for me these work better than 480

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Redcard on January 26, 2017, 11:39:01 AM

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

Redcard

newbie

Activity: 28

Merit: 0

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

rinus

sr. member

Activity: 362

Merit: 258

Quote from: carlo_0000 on January 26, 2017, 10:47:01 AM

good choice is rx470 or480 depending on what price you get them
but better of with a 5x ring than 6x for my experience

5x ring? What do u mean. What is the hashrate on 470 and 480? Also is there a big difference in hashrate between brands off the 470 or 480

carlo_0000

legendary

Activity: 1281

Merit: 1003

good choice is rx470 or480 depending on what price you get them
but better of with a 5x ring than 6x for my experience

rinus

sr. member

Activity: 362

Merit: 258

Hey guys

I want to start mining right away but don't know what hardware to buy. Budget about 1800 to 2000 euro. Want SS much as hashes as possible. Can somebody please advise

Redcard

newbie

Activity: 28

Merit: 0

After switch to dwarfpool it's working... with the same wallet addr and without ssl support.

carlo_0000

legendary

Activity: 1281

Merit: 1003

did you submit share to pool?

i think it s just devfee what is not working, so you can ignore this

Redcard

newbie

Activity: 28

Merit: 0

Hello guys,
I tried today the Claymore's CryptoNote GPU Miner v9.7 for first time and I get the following error:

Remote management (READ-ONLY MODE) is enabled on port 3333
10:28:48:915   1b04   DevFee: Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.44.157> port 3333 (unsecure)
10:28:48:978   2e80   send: {"method": "login", "params": {"login": "4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWFNeDcn", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

10:28:48:978   2e80   Stratum - Connected (unsecure)
10:28:48:978   2e80   New connection: reset total hashes counters
10:28:49:062   2e80   got 100 bytes
10:28:49:062   2e80   buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalid address or username used for login"}}

10:28:49:062   2e80   parse packet: 94
10:28:49:062   2e80   Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressorusernameusedforlogin"}}
10:28:49:077   2e80   buf was cleared
10:28:49:077   2e80   Stratum - reading socket failed 10038, disconnect
10:28:49:077   2e80    Job timeout, disconnect, retry in 20 sec...

As username I use xmr address generated in Kraken but why the miner doesn't accept it??

xneoenx

member

Activity: 84

Merit: 10

Quote from: anakbaru on January 24, 2017, 11:41:57 PM

Quote from: CoM1ner on January 24, 2017, 11:24:54 PM

Quote from: kirilvvbg on January 24, 2017, 11:11:35 AM

Guys, any ideas why I get the following message?

Quote

cannot find block data:
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"},"result":null}
cannot convert blob data

I returned everything back to stock settings and it stopped. Dunno Whats going on.

maybe because overclock and big raw intesity
sometime same card even with same memory not have same quality, so you can give them same setting.
for example i have 2 powercolor RD RX 480 8 GB, 1 card suitable with 2180 Memory Setting and 512 raw intesity, the other just 2130 Memory Setting and 508 raw intesity.

And could / may also be pool dependant. I get low difficulty share when I have overclocked or undervolted too much.

Cubirez

full member

Activity: 185

Merit: 100

Quote from: lodcomm on January 24, 2017, 09:39:51 PM

Hello Folks,

I see reference in several places to a linux_64 version of this miner.. anyone have a link or url for the linux version?

thanks

-t

AFAIK there is no "new" linux version of this miner, last one being 9.1.
You can also check sgminer-GM or wolf's miner which both work under linux and that are performance-wise more or less on par with Claymore's 9.7.

anakbaru

jr. member

Activity: 60

Merit: 1

Quote from: CoM1ner on January 24, 2017, 11:24:54 PM

Quote from: kirilvvbg on January 24, 2017, 11:11:35 AM

Guys, any ideas why I get the following message?

Quote

cannot find block data:
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"},"result":null}
cannot convert blob data

I returned everything back to stock settings and it stopped. Dunno Whats going on.

maybe because overclock and big raw intesity
sometime same card even with same memory not have same quality, so you can give them same setting.
for example i have 2 powercolor RD RX 480 8 GB, 1 card suitable with 2180 Memory Setting and 512 raw intesity, the other just 2130 Memory Setting and 508 raw intesity.

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 138. (Read 2145056 times)