XMR is "designed" for old cards - forget it.
Maybe, but in my 480 rigs mining XMR with wolf's miner is still more profitable than any alternative
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 137. (Read 2145056 times)
Maybe, but in my 480 rigs mining XMR with wolf's miner is still more profitable than any alternative
XMR is "designed" for old cards - forget it.
what kind of statement is that? do you have any idea what is it you're talking about?
XMR is "designed" for old cards - forget it.
We need a new XMR miner! Adjusted to the 4XX cards and the new AMD drivers.
@Claymore... please?
@Claymore... please?
Can someone please help?
why is this happening randomly ? before this it was rock stable for >24 hours
11:55:18:642 e74 Round
11:55:20:064 948 GPU 0: HashCnt = 1024, time = 1395 ms, hashrate = 734 h/s
11:55:20:080 948 Round
11:55:20:892 55c GPU0 t=49C fan=46%, GPU1 t=55C fan=41%
11:55:20:892 55c watchdog - thread 0, hb time 812
11:55:20:892 55c watchdog - thread 1, hb time 2250
11:55:20:892 55c watchdog - thread 2, hb time 80437
11:55:20:892 55c WATCHDOG: Thread 2 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c watchdog - thread 3, hb time 81891
11:55:20:908 55c WATCHDOG: Thread 3 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c WATCHDOG: GPU memory error, you need to restart miner
11:55:21:517 e74 GPU 0: HashCnt = 1024, time = 1412 ms, hashrate = 725 h/s
11:55:21:533 e74 Round
11:55:22:174 55c Restarting OK, exit...
and when it restart minner PC just hangs and I need to manually restart PC. It's not problem when I'm here but I soon plan to move miner in other place where I will have much cheaper electricity but I will have no access to minner and this will be a huge problem for me.
2x480 8gb OC ~ 1470 h/s with 305 W from wall
1350 MHz, 1080 mV
2200 MHz, 1000 mV
reject rate about 1.3%, suprnova pool
why is this happening randomly ? before this it was rock stable for >24 hours
11:55:18:642 e74 Round
11:55:20:064 948 GPU 0: HashCnt = 1024, time = 1395 ms, hashrate = 734 h/s
11:55:20:080 948 Round
11:55:20:892 55c GPU0 t=49C fan=46%, GPU1 t=55C fan=41%
11:55:20:892 55c watchdog - thread 0, hb time 812
11:55:20:892 55c watchdog - thread 1, hb time 2250
11:55:20:892 55c watchdog - thread 2, hb time 80437
11:55:20:892 55c WATCHDOG: Thread 2 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c watchdog - thread 3, hb time 81891
11:55:20:908 55c WATCHDOG: Thread 3 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c WATCHDOG: GPU memory error, you need to restart miner
11:55:21:517 e74 GPU 0: HashCnt = 1024, time = 1412 ms, hashrate = 725 h/s
11:55:21:533 e74 Round
11:55:22:174 55c Restarting OK, exit...
and when it restart minner PC just hangs and I need to manually restart PC. It's not problem when I'm here but I soon plan to move miner in other place where I will have much cheaper electricity but I will have no access to minner and this will be a huge problem for me.
2x480 8gb OC ~ 1470 h/s with 305 W from wall
1350 MHz, 1080 mV
2200 MHz, 1000 mV
reject rate about 1.3%, suprnova pool
use "-r 1" and reboot.bat with shutdown /r /t 5 /f - problem solved
(better yet fix your card settings)
those are the different power levels for the gpu. so the lowest is for 2D mode when you're no utilizing the GPU, the higher ones are for more demanding application calls.
What power usage per card do u have at 740 hash?
I am at around 360W with 3 cards (RX480) and sys power. 410W Including CPU Mining (i7 4790K).
Ok I will order 6 sapphire rx480 nitro 8giga cards. They are better for tweaking yes? Good cooling... With these I safely get 740 hash and sub 800 w in total yes?
good cards. you'll probably be able to get it below 800 on XMR, in any case I'd suggest to run it of 1.2KW PSU
Quick question. Is there a difference between gigabyte rx480 8g gaming en the saphire Rx 480 nitro 8g?
Can someone please help?
why is this happening randomly ? before this it was rock stable for >24 hours
11:55:18:642 e74 Round
11:55:20:064 948 GPU 0: HashCnt = 1024, time = 1395 ms, hashrate = 734 h/s
11:55:20:080 948 Round
11:55:20:892 55c GPU0 t=49C fan=46%, GPU1 t=55C fan=41%
11:55:20:892 55c watchdog - thread 0, hb time 812
11:55:20:892 55c watchdog - thread 1, hb time 2250
11:55:20:892 55c watchdog - thread 2, hb time 80437
11:55:20:892 55c WATCHDOG: Thread 2 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c watchdog - thread 3, hb time 81891
11:55:20:908 55c WATCHDOG: Thread 3 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c WATCHDOG: GPU memory error, you need to restart miner
11:55:21:517 e74 GPU 0: HashCnt = 1024, time = 1412 ms, hashrate = 725 h/s
11:55:21:533 e74 Round
11:55:22:174 55c Restarting OK, exit...
and when it restart minner PC just hangs and I need to manually restart PC. It's not problem when I'm here but I soon plan to move miner in other place where I will have much cheaper electricity but I will have no access to minner and this will be a huge problem for me.
2x480 8gb OC ~ 1470 h/s with 305 W from wall
1350 MHz, 1080 mV
2200 MHz, 1000 mV
reject rate about 1.3%, suprnova pool
why is this happening randomly ? before this it was rock stable for >24 hours
11:55:18:642 e74 Round
11:55:20:064 948 GPU 0: HashCnt = 1024, time = 1395 ms, hashrate = 734 h/s
11:55:20:080 948 Round
11:55:20:892 55c GPU0 t=49C fan=46%, GPU1 t=55C fan=41%
11:55:20:892 55c watchdog - thread 0, hb time 812
11:55:20:892 55c watchdog - thread 1, hb time 2250
11:55:20:892 55c watchdog - thread 2, hb time 80437
11:55:20:892 55c WATCHDOG: Thread 2 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c watchdog - thread 3, hb time 81891
11:55:20:908 55c WATCHDOG: Thread 3 hangs in OpenCL call, you need to restart miner
11:55:20:908 55c WATCHDOG: GPU memory error, you need to restart miner
11:55:21:517 e74 GPU 0: HashCnt = 1024, time = 1412 ms, hashrate = 725 h/s
11:55:21:533 e74 Round
11:55:22:174 55c Restarting OK, exit...
and when it restart minner PC just hangs and I need to manually restart PC. It's not problem when I'm here but I soon plan to move miner in other place where I will have much cheaper electricity but I will have no access to minner and this will be a huge problem for me.
2x480 8gb OC ~ 1470 h/s with 305 W from wall
1350 MHz, 1080 mV
2200 MHz, 1000 mV
reject rate about 1.3%, suprnova pool
Ok I will order 6 sapphire rx480 nitro 8giga cards. They are better for tweaking yes? Good cooling... With these I safely get 740 hash and sub 800 w in total yes?
Yes. They are good cards, with the best (lenient) mosfets and good cooling. They didnt go cheap like Gigabyte or Powercolor. But remember you may still need to tweak you bios / strap timings to run it efficiently.
Yeah was not sure to get the cheaper 4giga ones but I am convinced buying the 4giga nitro are the best way to go. I will reflash the BIOS with the 1500 straps and undervolt...
Ok I will order 6 sapphire rx480 nitro 8giga cards. They are better for tweaking yes? Good cooling... With these I safely get 740 hash and sub 800 w in total yes?
Yes. They are good cards, with the best (lenient) mosfets and good cooling. They didnt go cheap like Gigabyte or Powercolor. But remember you may still need to tweak you bios / strap timings to run it efficiently.
those are the different power levels for the gpu. so the lowest is for 2D mode when you're no utilizing the GPU, the higher ones are for more demanding application calls.
What power usage per card do u have at 740 hash?
I am at around 360W with 3 cards (RX480) and sys power. 410W Including CPU Mining (i7 4790K).
Ok I will order 6 sapphire rx480 nitro 8giga cards. They are better for tweaking yes? Good cooling... With these I safely get 740 hash and sub 800 w in total yes?
good cards. you'll probably be able to get it below 800 on XMR, in any case I'd suggest to run it of 1.2KW PSU
those are the different power levels for the gpu. so the lowest is for 2D mode when you're no utilizing the GPU, the higher ones are for more demanding application calls.
What power usage per card do u have at 740 hash?
I am at around 360W with 3 cards (RX480) and sys power. 410W Including CPU Mining (i7 4790K).
Ok I will order 6 sapphire rx480 nitro 8giga cards. They are better for tweaking yes? Good cooling... With these I safely get 740 hash and sub 800 w in total yes?
those are the different power levels for the gpu. so the lowest is for 2D mode when you're no utilizing the GPU, the higher ones are for more demanding application calls.
What power usage per card do u have at 740 hash?
I am at around 360W with 3 cards (RX480) and sys power. 410W Including CPU Mining (i7 4790K).
those are the different power levels for the gpu. so the lowest is for 2D mode when you're no utilizing the GPU, the higher ones are for more demanding application calls.
What power usage per card do u have at 740 hash?
Should be Sub 100W / card at these voltages.
those are the different power levels for the gpu. so the lowest is for 2D mode when you're no utilizing the GPU, the higher ones are for more demanding application calls.
What power usage per card do u have at 740 hash?
those are the different power levels for the gpu. so the lowest is for 2D mode when you're no utilizing the GPU, the higher ones are for more demanding application calls.
these are the safe numbers for my average ref 480 8GB with 1500 straps:
it does ~740.
[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70
it does ~740.
[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70
all these numbers , are that settings u put in somewhere? and what do you mean by " 1500 " straps ?
" im still learning a lot about mining
"for rx400 series use watttool with profiles for each card/each algo.
straps are memory timings that you need to tighten in bios (bios mod)
are there manuals on how to reflash these bios ?
ok i did some research and i understand how to mod the bios, you copy the value from 1500 to the higher frequencies ...
but what dos P1 clk and p1 vid , p2 clk p2 vid ... mean, are these all different gpu cards? why is the first set so low and the last so high? should you not set them the same for max hash ?
thx for the advice , appreciate it
these are the safe numbers for my average ref 480 8GB with 1500 straps:
it does ~740.
[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70
it does ~740.
[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70
all these numbers , are that settings u put in somewhere? and what do you mean by " 1500 " straps ?
" im still learning a lot about mining
"for rx400 series use watttool with profiles for each card/each algo.
straps are memory timings that you need to tighten in bios (bios mod)
are there manuals on how to reflash these bios ?
these are the safe numbers for my average ref 480 8GB with 1500 straps:
it does ~740.
[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70
http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-seriesit does ~740.
[GPU]
Mode=Manual
P1_CLK=483
P1_VID=800
P2_CLK=778
P2_VID=811
P3_CLK=906
P3_VID=834
P4_CLK=1020
P4_VID=854
P5_CLK=1060
P5_VID=857
P6_CLK=1080
P6_VID=888
P7_CLK=1160
P7_VID=917
[Memory]
Mode=Manual
P1_CLK=1930
P1_VID=917
[Fan]
Mode=Manual
MinRPM=1400
MaxRPM=4900
TargetTemp=70
all these numbers , are that settings u put in somewhere? and what do you mean by " 1500 " straps ?
" im still learning a lot about mining
"for rx400 series use watttool with profiles for each card/each algo.
straps are memory timings that you need to tighten in bios (bios mod)
it fucks all the limits
Confirmed but there must be some solution. Like waterblock instead of fan after all
sure I do have one 370 that drives my desktop which is watercooled:)
It just cannot believe there's no fan...
it fucks all the limits
Confirmed but there must be some solution. Like waterblock instead of fan after all
Jump to: