Claymore's CryptoNote AMD GPU Miner v11.3 - page 140.

bobiksamara

newbie

Activity: 1

Merit: 0

Quote from: zorvalth on December 27, 2016, 11:19:46 AM

On half of my machines i got this error from time to time:

Code:

Error in server response
: {"jsonrpc":"2.0","id":1,"error":{"code":23,"message":"Shareabovetarget."}}

Mining in Nicehash, any ideas?

HELP PLEASE

chafer99

member

Activity: 99

Merit: 10

Quote from: xneoenx on January 22, 2017, 06:02:18 PM

Quote from: chafer99 on January 22, 2017, 03:20:42 AM

Quote from: werdwerdus on January 18, 2017, 12:10:43 AM

Quote from: KL0nLutiy on January 17, 2017, 04:11:46 PM

What the hash rate on 380x?

i'm getting around 575 h/s on 380x no OC

R-380 2GB Stock - 650h/s, SgminerGM - 620h/s

Whats your conf file look like? What settings are you using?

Claymore = default, Sgminer-gm "--rawintensity 896"

Cubirez

full member

Activity: 185

Merit: 100

Quote from: Ursul0 on January 19, 2017, 03:14:38 PM

Quote from: werdwerdus on January 19, 2017, 11:28:50 AM

wow my 470 only gets 575 h/s, are you overclock the memory??

bios mod, mem overclock, UV

Which mem straps are you using on your Samsung Bios? 1500 or 1750 MHz ?

carlo_0000

legendary

Activity: 1281

Merit: 1003

my 380s doing 565 to 620 (asus slowest & sapphire fastest)

xneoenx

member

Activity: 84

Merit: 10

Quote from: chafer99 on January 22, 2017, 03:20:42 AM

Quote from: werdwerdus on January 18, 2017, 12:10:43 AM

Quote from: KL0nLutiy on January 17, 2017, 04:11:46 PM

What the hash rate on 380x?

i'm getting around 575 h/s on 380x no OC

R-380 2GB Stock - 650h/s, SgminerGM - 620h/s

Whats your conf file look like? What settings are you using?

chafer99

member

Activity: 99

Merit: 10

Quote from: werdwerdus on January 18, 2017, 12:10:43 AM

Quote from: KL0nLutiy on January 17, 2017, 04:11:46 PM

What the hash rate on 380x?

i'm getting around 575 h/s on 380x no OC

R-380 2GB Stock - 650h/s, SgminerGM - 620h/s

melfice123

newbie

Activity: 42

Merit: 0

Quote from: Ned Kelly on January 21, 2017, 08:32:24 PM

Quote from: melfice123 on January 21, 2017, 03:35:38 PM

Hello, since yesterday I have experienced a high latency mining xmr in supernova, up to almost 6,000ms, my question is that affects the profits?

I have tested with other sites and go under 140ms, it is only supernova that presents this problem since yesterday.

Thanks.

https://s30.postimg.org/oxddu82xt/image.jpg

Yes. When you receive a new job your share can be outdated. At other time it does not matter.

I see, Thanks for your help!

Ned Kelly

full member

Activity: 170

Merit: 101

Quote from: melfice123 on January 21, 2017, 03:35:38 PM

Hello, since yesterday I have experienced a high latency mining xmr in supernova, up to almost 6,000ms, my question is that affects the profits?

I have tested with other sites and go under 140ms, it is only supernova that presents this problem since yesterday.

Thanks.

https://s30.postimg.org/oxddu82xt/image.jpg

Yes. When you receive a new job your share can be outdated. At other time it does not matter.

melfice123

newbie

Activity: 42

Merit: 0

Hello, since yesterday I have experienced a high latency mining xmr in supernova, up to almost 6,000ms, my question is that affects the profits?

I have tested with other sites and go under 140ms, it is only supernova that presents this problem since yesterday.

Thanks.

https://s30.postimg.org/oxddu82xt/image.jpg

MCWey8

member

Activity: 81

Merit: 10

[ Poor Miner ]

Quote from: xneoenx on January 21, 2017, 02:07:44 PM

Did your card burn / get damaged?

I think the card is ok .. its displaying fine lol .. gonna try to mine some more on it and see what happens

xneoenx

member

Activity: 84

Merit: 10

Quote from: MCWey8 on January 21, 2017, 02:00:19 PM

seems -tstop with negative number DOES NOT close the miner instantly, be warned everyone.

Last night had a rx470 GPU fan error and fan speed drop significantly(Just like Claymore 9.6) and even tho i had "-tstop -80" in the config, it just errored while temperatures rose.

04:57:41:948   ab4   GPU #1 reached CLOSE temperature (81 >= 80)
04:57:41:949   ab4   Miner will be closed
04:57:45:985   ab4   GPU #1 reached CLOSE temperature (82 >= 80).
04:57:45:986   ab4   Miner will be closed
04:57:55:067   ab4   GPU #1 reached CLOSE temperature (85 >= 80).
04:57:55:068   ab4   Miner will be closed
04:57:58:095   ab4   GPU #1 reached CLOSE temperature (86 >= 80).
04:57:58:096   ab4   Miner will be closed
04:58:00:115   ab4   GPU #1 reached CLOSE temperature (87 >= 80).
04:58:00:116   ab4   Miner will be closed
~
05:36:08:150   ab4   GPU #1 reached CLOSE temperature (89 >= 80).
05:36:08:151   ab4   Miner will be closed

it took it 39 mins to close .. when i thought negative values where supposed to close miner instantly ?!?!

"You can also specify negative value to close miner immediately instead of stopping GPU, for example, "-tstop -95" will close miner as soon as any GPU reach 95C temperature."

but -tstop -80 did not save me, or my card......

Did your card burn / get damaged?

MCWey8

member

Activity: 81

Merit: 10

[ Poor Miner ]

seems -tstop with negative number DOES NOT close the miner instantly, be warned everyone.

Last night had a rx470 GPU fan error and fan speed drop significantly(Just like Claymore 9.6) and even tho i had "-tstop -80" in the config, it just errored while temperatures rose.

04:57:41:948   ab4   GPU #1 reached CLOSE temperature (81 >= 80)
04:57:41:949   ab4   Miner will be closed
04:57:45:985   ab4   GPU #1 reached CLOSE temperature (82 >= 80).
04:57:45:986   ab4   Miner will be closed
04:57:55:067   ab4   GPU #1 reached CLOSE temperature (85 >= 80).
04:57:55:068   ab4   Miner will be closed
04:57:58:095   ab4   GPU #1 reached CLOSE temperature (86 >= 80).
04:57:58:096   ab4   Miner will be closed
04:58:00:115   ab4   GPU #1 reached CLOSE temperature (87 >= 80).
04:58:00:116   ab4   Miner will be closed
~
05:36:08:150   ab4   GPU #1 reached CLOSE temperature (89 >= 80).
05:36:08:151   ab4   Miner will be closed

it took it 39 mins to close .. when i thought negative values where supposed to close miner instantly ?!?!

"You can also specify negative value to close miner immediately instead of stopping GPU, for example, "-tstop -95" will close miner as soon as any GPU reach 95C temperature."

but -tstop -80 did not save me, or my card......

xneoenx

member

Activity: 84

Merit: 10

Quote from: carlo_0000 on January 20, 2017, 09:55:09 PM

not possible there is no bottleneck with pci-e lol

you aware that we run the gpu on a pci-e 1 x with riser lol Grin

i run for long time a r9390 on first generation pci-e with atlhon 3200+, was working just fine

if you only have 575h/s, you just have the wrong memory timing

Bingo. Run mem at 2000 and follow the quick tut I posted on how in get timings @ 2000mhz. Other tut's available as well, just google search.

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: exorcizamus on January 20, 2017, 08:48:33 PM

Quote from: werdwerdus on January 19, 2017, 11:28:50 AM

wow my 470 only gets 575 h/s, are you overclock the memory??

your mobo and cpu support pci e gen 3 ?
i am using an sapphire rx480 4 gb on pci e gen2 and he got same speed like you because this a nice bottleneck

not possible there is no bottleneck with pci-e lol

you aware that we run the gpu on a pci-e 1 x with riser lol Grin

i run for long time a r9390 on first generation pci-e with atlhon 3200+, was working just fine

if you only have 575h/s, you just have the wrong memory timing

exorcizamus

newbie

Activity: 2

Merit: 0

Quote from: werdwerdus on January 19, 2017, 11:28:50 AM

wow my 470 only gets 575 h/s, are you overclock the memory??

your mobo and cpu support pci e gen 3 ?
i am using an sapphire rx480 4 gb on pci e gen2 and he got same speed like you because this a nice bottleneck

carlo_0000

legendary

Activity: 1281

Merit: 1003

same not working
i already try that yesturday

failed to initialize gpu ..
error -4 attempting to queud kernel 0

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: christiano88 on January 20, 2017, 06:21:17 AM

Quote from: Ursul0 on January 19, 2017, 07:47:31 AM

Quote from: wacko on January 19, 2017, 04:22:34 AM

Quote from: Ursul0 on January 18, 2017, 07:55:22 PM

on win10 wolf gpu miner 0.4 hashes much better on rx4 (even more without the devfee) in terms of hash and power consumption.

Which versions of RX 470 do you use - 4GB or 8GB? And which version of Wolf miner? I'm getting 720 h/s with the latest Claymore (rx 470 4gb). Tried wolf-xmr-miner-v0.4 and I'm only getting ~ 520-550 h/s with your settings. The same with default settings. Am I using the wrong miner or wrong settings?

mine are 470 4gb with bios mod. 710-725h/s UV

EDIT: SGminer-GM even faster - it goes up to 740h

What is your config for sgminer-gm? I have tried running it but it closes by itself after saying "using bla bla bla 2.7".

the config for rx400:
{
"name": "xmr",
"algorithm": "cryptonight",
"rawintensity": "504",
"worksize": "4",
"gpu-threads": "2"
}

there're some issues with openCL platform detection (run sgminer.exe -n and see what's there) , especially if you have integrated graphics enabled.
try to play with setting "gpu-platform" to 0 or 1.
disabling/uninstalling intel drivers in device manager may also help.

christiano88

member

Activity: 161

Merit: 10

Quote from: Ursul0 on January 19, 2017, 07:47:31 AM

Quote from: wacko on January 19, 2017, 04:22:34 AM

Quote from: Ursul0 on January 18, 2017, 07:55:22 PM

on win10 wolf gpu miner 0.4 hashes much better on rx4 (even more without the devfee) in terms of hash and power consumption.

Which versions of RX 470 do you use - 4GB or 8GB? And which version of Wolf miner? I'm getting 720 h/s with the latest Claymore (rx 470 4gb). Tried wolf-xmr-miner-v0.4 and I'm only getting ~ 520-550 h/s with your settings. The same with default settings. Am I using the wrong miner or wrong settings?

mine are 470 4gb with bios mod. 710-725h/s UV

EDIT: SGminer-GM even faster - it goes up to 740h

What is your config for sgminer-gm? I have tried running it but it closes by itself after saying "using bla bla bla 2.7".

carlo_0000

legendary

Activity: 1281

Merit: 1003

me to have 6x 470 4gb memory at 1920 (higher not stable, 1 get trouble at 1930 the other max 1950)
little more than 700h/s

but did not know that sgminer did that good

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: werdwerdus on January 19, 2017, 11:28:50 AM

wow my 470 only gets 575 h/s, are you overclock the memory??

bios mod, mem overclock, UV

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 140. (Read 2145056 times)